Who is this choice relevant to?

Viewer with weak Wi-Fi upstairs

You want to watch a live lecture on more than one floor and work out where you need extra coverage. The position of the Wi-Fi nodes and how they connect to each other are important considerations. The Consumentenbond also highlights the importance of where you place Wi-Fi extenders.

Viewer with a network cable between floors

You can connect Wi-Fi nodes by cable and want to make use of this option without replacing your internet router unnecessarily. TP-Link and ASUS describe Ethernet backhaul as an option for compatible systems.

Viewer who wants to keep their provider’s router

You’re looking for an extension that works with your current connection and want to know in advance which mode and connection you’ll need. ACM ConsuWijzer explains the freedom to choose your router in the Netherlands; also check the settings that apply to your connection.

What should you look for when choosing?

Start with your existing router

Choose this step: if you’re not yet sure whether the issue is caused by Wi-Fi, your internet connection or the video service.

Bear in mind: this doesn’t require an extra device, but it won’t automatically fix a persistently weak Wi-Fi signal.

Wired access point or mesh node

Choose this option: if there’s a usable network cable running to the floor and your system supports Ethernet backhaul.

Bear in mind: you’ll need to consider the cable, available ports and the right router or access point mode.

Wireless mesh

Choose this option: if there’s no cable between floors, but the planned nodes can connect to each other wirelessly.

Bear in mind: the connection between nodes will still depend on where they’re placed and the conditions in your home.

What to consider What should you check? Who should pay particular attention?
Coverage where you watch Note where the lecture buffers, how many nodes are included in the package and where you could place them. If the lecture buffers upstairs, I want to know which viewing spots need extra coverage and where a node could go. Around 36% of consumers give coverage in multiple viewing spots top priority.
Connection between floors Check whether there’s a network cable and whether the system supports Ethernet backhaul. If there’s a cable between floors, I want to know whether the nodes can communicate over a wired connection. Without a cable, I need to check whether the wireless connection between the nodes is usable. Around 29% of consumers put this connection first.
Connecting to your router Check whether you’ll be keeping your provider’s router and which router or access point mode works with the system. If I want to keep my provider’s router, I’ll check how the new system connects to it and what settings are needed. Around 21% of consumers give keeping their existing router top priority.
Everything you’ll need Compare the number of nodes and check whether you’ll need cables or a compatible PoE power supply. If you don’t want to buy more nodes or power supplies than you need, consider the whole set-up and how it will be powered. Around 14% of consumers put the total purchase and running costs first.

Common mistakes when choosing

  • Assuming a stated coverage area guarantees a signal on every floor

    A general coverage figure doesn’t tell you how good the connection will be where you watch or how well the nodes will reach each other.

    Before you buy, decide where you’ll watch and where you could place an extra node. Also consider the connection that node itself will need.

  • Confusing the standard Deco X50 with the Deco X50-PoE

    These are different models. The PoE power supply and port specifications for the X50-PoE don’t automatically apply to the standard X50.

    Check the full model name, hardware version, ports and power method for the exact product on offer. For PoE, TP-Link lists support for 802.3at or 802.3bt on the X50-PoE V2, not 802.3af.

  • Mistaking a standalone repeater for a complete mesh kit

    A standalone FRITZ!Repeater 3000 AX is not the same as the FRITZ!Mesh Set 4200, which FRITZ! says contains three of these nodes.

    Check how many devices are actually in the package and what equipment you already have.

Brands to compare

TP-Link

The Deco X50 range includes Wi-Fi 6 mesh systems. The Deco X50-PoE is a separate model worth comparing if PoE power or a different port configuration matters to you.

  • TP-Link describes Ethernet backhaul for Deco. This may be useful if you want to connect the nodes using a network cable.
  • For the Deco X50-PoE V2, TP-Link lists PoE and two 2.5Gbps ports. Don’t assume these features apply to a standard X50 or to a model whose hardware version isn’t clear. For PoE, TP-Link lists 802.3at or 802.3bt, not 802.3af.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system worth comparing if you’re assessing several nodes and the possibility of a wired connection.

  • ASUS describes Ethernet backhaul for the XD5 when there are Ethernet ports in the walls.
  • A stated wired feature doesn’t guarantee uninterrupted video in a particular home. Check the exact model and where you can place the nodes.

FRITZ!

FRITZ! offers both standalone repeaters and the separate FRITZ!Mesh Set 4200, which the manufacturer says consists of three FRITZ!Repeater 3000 AX nodes.

  • FRITZ! says the set can connect to an existing router or a compatible modem/ONT.
  • A standalone repeater and a three-piece set are different purchases. Practical coverage will also depend on where you place the nodes in your home.

Joybuy products for wireless mesh

These product options are wireless mesh kits with multiple nodes for use in different viewing spots. For the exact model on offer, also check that it carries the required CE marking.

TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

This kit includes three mesh stations and could suit several viewing spots, provided the stated connection limit works for your devices.

Dual-band Wi-Fi 5; the stated maximum wireless speed is 1167 Mbps. According to the product description, the wired ports are limited to 100 Mbps.

Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

With three stations, this mesh kit could suit several viewing spots if the nodes can be positioned and connected effectively in your home.

Dual-band Wi-Fi 5. The product description mentions roaming between stations.

Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

This kit includes three mesh nodes and could cover multiple floors if you can place them in suitable locations.

Dual-band Wi-Fi 6; according to the product description, each unit has three Gigabit ports.

Joybuy
TP-Link Deco X50-PoE (2-pack)

TP-Link Deco X50-PoE (2-pack)

This kit includes two mesh nodes and may be worth considering if you want to cover two viewing spots and are thinking about PoE power.

Dual-band Wi-Fi 6; the product description mentions PoE and two Ethernet ports per unit. DC power is also listed as an option. Check which PoE power supply is compatible with the exact hardware version.

Joybuy
TP-Link Deco S7 (3-pack)

TP-Link Deco S7 (3-pack)

This kit includes three mesh nodes and could be a good option if you want to connect several viewing spots as well as wired devices.

Dual-band Wi-Fi 5; according to the product description, each unit has three Ethernet ports.

Joybuy

Frequently asked questions

Do I need to replace my provider’s modem or router to watch a lecture upstairs?

No, not necessarily. First, check whether an extra Wi-Fi node will work with your existing set-up. ACM ConsuWijzer explains the freedom to choose your router in the Netherlands; when connecting your own equipment to your provider’s network, certain requirements and settings may apply.

How do I connect Deco nodes on different floors using a cable?

It depends on the mode you choose. According to TP-Link, a wired satellite in router mode can be connected to the LAN side of the main Deco or to a switch connected to it. In access point mode, TP-Link also describes connecting it to the main modem or router. Follow the instructions for your chosen mode to avoid creating a network loop.

Do I always need a PoE switch for a Deco X50-PoE?

No, not if you use a DC power adapter with the model you choose. If you want to power the node through the network cable, TP-Link lists support for 802.3at and 802.3bt for the X50-PoE V2, but not 802.3af. Also check that the power supply has enough power budget and that its specification matches the hardware version of your model.

Is a high stated Wi-Fi speed enough for uninterrupted live lectures?

No. Your internet connection and the quality of the original video stream also matter. YouTube Help lists internet connection speed as one factor affecting video quality. So check the connection where you watch and between the Wi-Fi nodes, rather than comparing stated maximum speeds alone.

Which Dutch rules apply if I buy a Wi-Fi router myself?

CE marking is compulsory for radio equipment sold in the EU. The Rijksinspectie Digitale Infrastructuur states that the marking must be on the device, so check this for the exact model. According to Ondernemersplein, most other requirements under the Cyber Resilience Act apply from 11 December 2027. So, as at 23 October 2026, they are not yet a general purchase requirement in force.