Watching behind thick walls
You want to watch a live concert in a room with a weak Wi-Fi signal and find out whether you need an extra Wi-Fi point. The Consumers’ Association notes that coverage can vary between mesh models.
Don’t buy a new router straight away. First, test with an Ethernet cable to see whether the internet connection is dropping out, then compare it with Wi-Fi where you watch. If the Wi-Fi signal is particularly weak there, choose a wired access point or mesh with Ethernet backhaul if you have a cable available. Without a cable, wireless mesh may be suitable, provided the mesh units themselves can still get a usable connection. The Consumers’ Association recommends a wired speed test; a higher advertised Wi-Fi speed alone does not prove that you’ll get coverage behind thick walls.
You want to watch a live concert in a room with a weak Wi-Fi signal and find out whether you need an extra Wi-Fi point. The Consumers’ Association notes that coverage can vary between mesh models.
You can connect your viewing area or an extra Wi-Fi point by cable and want to avoid sending the connection between rooms through walls as much as possible. The Consumers’ Association recommends testing the internet connection using a cable.
You want to find out whether the dropouts are caused by your internet connection, router placement or Wi-Fi signal where you watch before buying anything. The Consumers’ Association recommends connecting a computer with an Ethernet cable for a speed test.
When: if you’re not yet sure what’s causing the dropouts or your router is poorly positioned.
Trade-off: this could save you from buying something, but it won’t always fix a weak connection through several walls.
When: if you can run an Ethernet cable to your viewing area or between Wi-Fi points, and reliability is your priority.
Trade-off: you’ll need compatible Ethernet ports and may need to install extra cabling or arrange additional installation.
When: if cabling isn’t an option and you can place an extra point somewhere it can still connect to the main network.
Trade-off: the connection between the mesh points also needs to cover the distance and overcome any obstacles.
When: if testing a different position shows that the coverage is good enough, but your existing router turns out to be the limiting factor.
Trade-off: a single access point remains vulnerable to thick walls and poor placement.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage behind thick walls | Test Wi-Fi where you watch and where you plan to put each extra point; check how many points are included in the set. | If I mainly want to know whether the signal reaches my viewing area, I’ll focus on coverage there. Around 36% of consumers say coverage is their main concern when buying. |
| A stable connection during the broadcast | Check whether the mesh points you’re considering support Ethernet backhaul and whether you can run a cable between them. TP-Link describes Ethernet backhaul for Deco as a connection between units using an Ethernet cable. | If I want a stable connection between rooms while watching a live concert, this connection matters a lot. Around 29% of consumers prioritise stability between the points. |
| Finding the cause first | Test your internet connection with a computer using an Ethernet cable, then compare it with Wi-Fi where you watch. The Consumers’ Association recommends a wired speed test. | If I don’t want to buy equipment before finding out what’s causing the problem, I’ll start by testing. Around 21% of consumers prioritise diagnosing the issue and avoiding an unnecessary purchase. |
| Installation, connection and management | Check how to connect it to your provider’s service, what update information is available and which requirements apply to the specific model. The Dutch Authority for Digital Infrastructure states that stricter RED requirements have applied since 1 August 2025. | If I want to connect a device myself and manage it easily, I’ll check in advance that it will work with my network. Around 14% of consumers give installation and management top priority. |
An advertised Wi-Fi speed doesn’t prove that the signal will reach your viewing area through thick walls. The Consumers’ Association also points out that the Wi-Fi version alone tells you too little about performance.
Test the signal where you watch and assess the connection between the Wi-Fi points too, rather than focusing only on the advertised speed or coverage area.
If your internet connection itself is the limiting factor, a different router may not fix the dropouts.
Before buying, test your connection with a cable and compare the result with Wi-Fi where you watch.
A version with a similar name may have different ports or a different number of Wi-Fi points included.
Check the full model name and the number of points included on the product detail page.
The Deco X50 is a mesh product range, which includes a 3-pack version. This may be worth considering if you want to place several Wi-Fi points around your home.
The ZenWiFi XD5 is a mesh product range with a 3-point version. It may suit you if you’re considering app-based setup and, potentially, a wired connection between points.
A FRITZ!Repeater with a LAN port could be an option for extending your network if you already use a compatible FRITZ!Box.
Orbi includes mesh systems with a router and satellites. The Consumers’ Association describes the RBE773 as a specific version with three points.
These Joybuy products are mesh sets for anyone looking to add extra Wi-Fi points. Check each version to make sure its ports and the wired or wireless connection you want between points will work with your network.
Image unavailable
Worth considering if you want to place several Wi-Fi points and are looking at a wired connection between them; check that this version’s ports will work with your network.
Set: 2-pack.
Image unavailable
An option to consider if you want to add a mesh point and might be able to use an Ethernet cable between the points; check the ports on the version being offered.
Set: 2-pack.
Image unavailable
Worth considering if you want to place several mesh points without using cables; the wireless connection between the points will still need to reach the locations you choose.
Dual-band: 2.4 GHz/5 GHz; Wi-Fi 6 (802.11ax).
Image unavailable
An option to consider if you want to place several mesh points without cables between them; check that the connection will have sufficient coverage at the locations you choose.
Tri-band: 2.4 GHz/5 GHz/6 GHz; Wi-Fi 6E (802.11ax).
Image unavailable
Worth considering if you want to place several Wi-Fi points and are looking at a wired setup; check that the PoE and Ethernet connections will work with your network.
Dual-band: 2.4 GHz/5 GHz; Wi-Fi 6 (802.11ax); 2 Ethernet ports per unit.
Not until you’ve tested what’s causing the problem. First, test with a computer connected via an Ethernet cable. If that connection is also repeatedly slow, look into your internet service or contact your provider. If Wi-Fi is particularly poor where you watch, look at the router’s position and the signal coverage.
Place it somewhere it can still connect to your existing network, then test the Wi-Fi where you watch. If you can use an Ethernet cable, check whether both points support Ethernet backhaul. This means their connection to each other won’t have to pass wirelessly through the wall.
According to ACM ConsuWijzer, you have the freedom to choose your router, but your own router may not work straight out of the box in every situation. Check which connection settings your provider makes available and how the device connects to your provider’s modem.
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements, including CE marking. The Dutch Authority for Digital Infrastructure states that stricter requirements under the Radio Equipment Directive have applied since 1 August 2025; check the requirements for the specific version you want to buy.