Who is this buying guide for?

Groups working across multiple floors

Your participants work in different rooms or on different floors, and you mainly want to work out where extra Wi-Fi points are needed.

Groups sharing files and hosting guests

You want to give participants internet access while also deciding which devices or files they can access on the local network.

Organisers with an existing router

You want to keep your current connection and weigh up whether cabling, access point mode and the number of points you need make a purchase worthwhile.

What should you look for when buying?

Start by looking at the work areas, then check whether you can keep your existing router and whether there are cables running to the other floors. Only then decide how many points you need and which operating mode to use, bearing guest access and access to project resources in mind.

What to consider What to look for when buying Who is this important for?
Coverage on every floor in use Check how many points are included, where they can be placed and the coverage in your work areas. Treat any stated coverage area as a guide, not a guarantee for your home. If participants work on different floors, I want to know whether each work area will get coverage. Around 36% of consumers prioritise coverage on every floor in use.
Connection during simultaneous work Check for ethernet backhaul, available ports and the cable route. Advertised Wi-Fi speeds don’t automatically tell you what the connection will be like in your work areas. When several participants are working at the same time, I want the points and devices to stay usefully connected. Around 29% of consumers give stability during simultaneous work top priority.
Guest access and private devices Check whether guest access is available in your chosen mode, and test whether participants can still reach the project resources they need. If visitors are taking part, I want to limit their access to private devices without blocking access to agreed project resources. Around 21% of consumers prioritise network separation.
Expanding your existing setup Compare the number of points and the cables you’ll need. Check which features are available in each mode and whether the services you want are included. If my current router still meets my needs, I want to buy only what’s necessary for the work areas. Around 14% of consumers give easy expansion while keeping existing equipment top priority.

Common pitfalls

  • Assuming the stated coverage area guarantees coverage on every floor

    Where you place the points and any obstacles in between affect whether the signal reaches your work areas.

    Check how many points are included in the set, then test the connection where the group will actually be working.

    If coverage falls short, you may need an extra Wi-Fi point or cabling.

  • Assuming guest access works the same way in every mode

    Participants may be able to access private resources, or they may be unable to access files and devices needed for the project.

    Check the local access settings and test your chosen setup with a guest device.

  • Looking only at the first device

    Your finished setup may also require extra points or ethernet cables. What’s more, the features listed in product descriptions may depend on what’s included in the set.

    Compare the complete setup and check which features are included before you choose.

    Depending on the setup you want, you may need extra mesh points, cables or paid add-on features.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range with multiple points. TP-Link lists both wireless connections and optional ethernet backhaul between Deco units.

  • TP-Link lists ethernet backhaul as an option for the Deco X50.
  • According to TP-Link, some advanced router features aren’t available in access point mode. Also check the guest network settings for your chosen software version.

ASUS

ASUS describes the ZenWiFi XD5 as a mesh option with points that can be placed in different locations.

  • According to ASUS, the XD5 can use ethernet backhaul if network connections are available between the points.
  • This product specification is not an independent measurement of performance in a Dutch home.

FRITZ!

The FRITZ!Mesh Set 1600 we reviewed is a three-piece set with FRITZ!Repeater 1200 AX points, which FRITZ! says can be connected to an existing router.

  • FRITZ! lists guest access, automatic updates and one gigabit LAN connection per point.
  • Check whether one connection per point is enough if you want to connect the points by cable as well as connect fixed project devices.

Joybuy products for Wi-Fi across multiple work areas

These are mesh sets for extending Wi-Fi to multiple work areas. For each model, check that the listed connections and features suit the cabling, router mode and guest access you need.

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A mesh set with two points for anyone looking to extend Wi-Fi across multiple work areas and considering a wired connection between the points.

Wi-Fi 6; the product description lists OFDMA, MU-MIMO, ethernet backhaul and a guest network.

Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

Three mesh points to distribute across several work areas; check in advance that you have suitable locations and, if needed, network cables.

Dual-band (2.4 GHz / 5 GHz), Wi-Fi 6 (802.11ax) and optional ethernet backhaul. The product description lists three gigabit ethernet ports per unit.

Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

A mesh set with three units for anyone looking to cover several work areas; check the connections and guest access you’ll need for your chosen setup.

Tri-band (2.4 GHz / 5 GHz / 6 GHz), Wi-Fi 6E (802.11ax). The product description lists three ethernet ports per unit and guest access.

Joybuy
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (3-pack)

Three mesh units to place in different locations; this version is worth considering if PoE support suits your setup.

Dual-band (2.4 GHz / 5 GHz), Wi-Fi 6 (802.11ax), PoE support and two ethernet ports per unit.

Joybuy
TP-Link Deco S7 (3-pack), dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack)

Three mesh units and guest access for anyone looking to extend Wi-Fi to several areas; compare the wireless standard with the devices used by your group.

Dual-band (2.4 GHz / 5 GHz), Wi-Fi 5 (802.11ac), three ethernet ports per unit and guest access. This model is Wi-Fi 5, not Wi-Fi 6.

Joybuy

Frequently asked questions

Do I need to replace my provider’s modem to use my own router or mesh system?

No, not always. ACM ConsuWijzer says you can choose your own modem or router in the Netherlands, as long as it meets the applicable requirements. You can also use a mesh set behind an existing router; check the connection and decide whether to use router or access point mode.

Where should I place a wireless mesh point on another floor?

Don’t wait until you reach a spot where the connection has already dropped out. Consumentenbond advises placing the points so they can still reach one another; then test the connection in the work areas themselves. If a network cable is available, also compare a wired connection between the points.

Are participants on a guest network always separated from my private network?

Don’t assume so. TP-Link describes network separation in router mode for Deco, and local access settings in access point mode. Available features may vary by model and software version; also test whether participants can access the agreed project resources.

Which extra components and features should I check?

Check how many points and cables your setup needs, which features are included in the set, and whether you can connect fixed devices. TP-Link says Deco X50 includes a free basic HomeShield plan; check which features are available with your model and chosen service.

Which Dutch product requirements are relevant when buying?

The Rijksinspectie Digitale Infrastructuur states that radio equipment sold in the Netherlands must meet the applicable requirements and carry a CE marking. Check the marking on the specific product variant. The RDI also states that cybersecurity requirements under RED 3.3 apply from 1 August 2025; check which requirements apply to the device you choose.