Who is this choice relevant to?

Designer with a slow upload connection

You work at the end of a long hallway and want to upload design files reliably from there. NETGEAR Support recommends placing a repeater where it’s still within range of the router. Simply extending Wi-Fi coverage doesn’t tell you how well uploads will work at your workstation.

Resident with one Wi-Fi dead spot

You’re looking for an extension without a cable, and there’s a suitable spot halfway down the hallway with a usable connection to the router. A connection indicator can help you find the right location.

User with a wired option

You can run Ethernet to your workstation, or try powerline using suitable power sockets if the wireless connection down the hallway isn’t strong enough. TP-Link and devolo describe these different connection options for their access point and powerline solutions.

What should you look for when choosing?

Consideration What should you check? Who should prioritise this?
Reliable uploads Compare an upload on the same laptop next to the router and at the end of the hallway. Then test again with the extender in the intended location. I mainly want to know whether my design file will upload properly from my workstation, not just whether Wi-Fi coverage has improved. Around 36% of consumers prioritise reliable uploads.
Coverage and placement Find a suitable power socket between the router and your workstation, and check the connection to the router there. Then test at the workstation itself. I want to cover the Wi-Fi dead spot and can use a midway point in the hallway if the repeater still gets a good signal from the router there. Around 29% of consumers prioritise coverage above all else.
Connection to the extender Check whether Ethernet can reach your workstation. If you try powerline, test the adapters in the intended sockets and check the upload speed there. I suspect the wireless connection down the hallway is the bottleneck and want to consider a wired or powerline alternative. Around 21% of consumers prioritise an alternative connection route.
Network compatibility and management Check that your router is compatible with the mesh extender, along with the available security and update settings. I want the extender to work with my existing network and to be able to manage its settings. Around 14% of consumers prioritise network compatibility and management.

Common buying mistakes

  • Plugging the repeater into the Wi-Fi dead spot

    A wireless repeater also needs a usable connection to the router. If you put it where the signal already drops out, it can’t magically fix that weak connection.

    First, choose a midway point and check the connection indicator there. If that doesn’t work, compare an Ethernet connection with powerline.

  • Assuming the quoted Wi-Fi speed is the upload speed at your workstation

    A product specification isn’t a measurement of upload speed at the end of your hallway. The connection between the router and extender, as well as your internet connection, also plays a part.

    Test the upload speed at your intended workstation and compare it with a measurement taken closer to the router.

  • Assuming every mesh extender works with every router

    OneMesh, FRITZ!-Mesh and AiMesh each have their own compatibility requirements. A mesh feature from one system won’t automatically work with a router from another system.

    Before buying, check your exact router model and the mesh feature supported by the extender.

  • Taking powerline speeds as guaranteed

    Powerline performance can vary between sockets, and electrical appliances can also affect the connection.

    Test the adapters in their intended locations and check the upload speed there.

    You may need to spend extra time trying different power sockets.

Relevant brands to consider

TP-Link

Worth considering if you’re comparing a standalone repeater, a wired access point or a powerline Wi-Fi kit.

  • TP-Link lists a gigabit Ethernet port and access point mode for the RE605X and RE705X. The TL-WPA7617 KIT connects via your mains wiring.
  • OneMesh on the RE605X requires a compatible OneMesh router. Quoted speeds aren’t measured upload speeds in your hallway.

FRITZ!

The FRITZ!Repeater 1200 AX may be suitable for a FRITZ! home network or as a wired access point.

  • FRITZ! lists a gigabit LAN connection and mesh integration with a FRITZ!Box. The manufacturer also describes a LAN bridge setup with a router from another brand.
  • Using a LAN bridge with another router doesn’t mean FRITZ!-Mesh is compatible with that router.

ASUS

The RP-AX58 is worth considering if you’re looking for a standalone extender or already have an AiMesh-compatible router.

  • ASUS describes using AiMesh with a compatible ASUS router, and using the extender with many other routers.
  • The listed Wi-Fi 6 features require compatible devices. Quoted speeds aren’t real-world upload measurements.

devolo

devolo offers solutions for wireless extension, access point use via Ethernet and powerline.

  • devolo describes using an access point with a LAN cable.
  • With powerline, some sockets may deliver lower transfer speeds, and electrical appliances can cause interference. This makes the installation location important.

NETGEAR

Useful as a guide to placing a wireless Wi-Fi repeater.

  • NETGEAR Support recommends placing the repeater between the router and your device, within range of the router, and checking the connection LED.
  • This placement advice doesn’t confirm how a particular model will perform in your hallway.

Products for this Wi-Fi setup

These product options cover wired access points, mesh extension, powerline Wi-Fi and wireless repeaters. Before buying, check for the CE marking on the specific device; the Dutch Authority for Digital Infrastructure says it must appear on Wi-Fi equipment.

Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

An option if Ethernet is available at the access point location.

The description lists a 2.5 Gigabit Ethernet uplink, PoE+ and wall or ceiling mounting. Compatible PoE+ equipment is required for the specified power supply; management is handled through UniFi Network.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7, white, 2 Internal

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7 (802.11be), White, 2 Internal

A mesh option if your existing network is compatible with the ASUS mesh system described.

The description lists dual-band (2.4 GHz / 5 GHz), Wi-Fi 7 (802.11be) and wired backhaul as an option. Mesh compatibility applies to other ASUS mesh systems; wired backhaul requires a network cable.

View at Joybuy
TP-Link TL-WPA7517 KIT Powerline Adapter Starter Kit

TP-Link TL-WPA7517 KIT Powerline Adapter Starter Kit

An option if you want to connect via your mains wiring and need Wi-Fi at your workstation.

The description mentions status LEDs for PLC and Wi-Fi. Actual powerline performance can vary between sockets, so test the connection in the intended locations.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

A wireless repeater may suit you if there’s a midway point where it can still get a good signal from the router.

The description lists the 2.4 GHz band and a quoted maximum speed of 300 Mbps. This isn’t a measured upload speed at your workstation.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N Access Point/WiFi Network Extender

An access point is an option if Ethernet is available at the extender location.

The description lists 2.4 GHz, up to 300 Mbit/s, 10/100 Mbit/s Ethernet LAN ports and support for passive PoE. The quoted maximum wireless speed isn’t a measured upload speed.

View at Joybuy

Frequently asked questions

Where should you place a repeater in a long hallway?

Start somewhere between the router and your workstation, where the repeater can still get a good signal from the router. Use the connection indicator, then check the connection at the end of the hallway; that spot won’t necessarily be suitable for the repeater.

Does a higher quoted Wi-Fi speed guarantee that your design file will upload faster?

No. A quoted Wi-Fi speed isn’t a measurement of the upload speed at your workstation. Test the upload there and compare it with a measurement taken closer to the router to see whether the local Wi-Fi connection is a factor.

How can you keep your Wi-Fi network secure and up to date?

Check that your router and Wi-Fi extender can receive updates, use a strong password and choose suitable Wi-Fi security settings. The Dutch Consumers’ Association also recommends disabling WPS after setup.

What should you consider when it comes to power consumption and warranty?

An additional Wi-Fi device uses electricity, and consumption varies by device and usage. According to ACM ConsuWijzer, the statutory warranty in the Netherlands isn’t automatically limited to two years: if a product develops a fault earlier than reasonably expected, the retailer is your point of contact.

Do you need a licence for standard Wi-Fi in the Netherlands?

The Dutch Authority for Digital Infrastructure says Wi-Fi can be used without a licence, notification or registration, subject to the conditions for the relevant frequencies. It also states that the equipment must carry the CE marking.