Workshop participant with a weak signal
The Wi-Fi is patchy in your usual spot in the loft, and you want to be able to take part from there. Consumentenbond recommends checking Wi-Fi where you’ll be using it before replacing any equipment.
First, test your internet connection using a wired connection, then check the Wi-Fi where you’ll be taking part in the workshop: a new router won’t fix a problem with your internet connection. If the wired connection works well, first try repositioning your router or using an access point; if you need Wi-Fi in different areas, mesh may be worth considering. Before buying, check the connection type, the exact model and the applicable CE marking.
The Wi-Fi is patchy in your usual spot in the loft, and you want to be able to take part from there. Consumentenbond recommends checking Wi-Fi where you’ll be using it before replacing any equipment.
You use different areas and want to find out whether one Wi-Fi point is enough or whether you need several. TP-Link’s information about Deco X50 describes options for using multiple mesh points.
You want to add Wi-Fi without automatically replacing the router function of your provider’s device. TP-Link describes an access point mode for Deco that works alongside an existing router.
First, compare a wired connection with the Wi-Fi at your workshop spot. Consumentenbond recommends comparing these measurements before choosing new equipment.
| What to consider | What to look for when buying | Who is this important for? |
|---|---|---|
| Connection at your workshop spot | Compare wired internet with Wi-Fi in your usual spot; also consider the positioning of your equipment and any obstacles. | If I take part in the workshop from one regular spot, I mainly want a reliable connection there. Around 42% of consumers put this concern first. |
| Coverage in several areas | Test the areas you use and check whether mesh points can connect wirelessly or via ethernet. | If I work in different areas of the loft, I want to know whether one point is enough or whether I need several. Around 33% of consumers prioritise this concern. |
| Compatibility with existing equipment | Check that router or access point mode will work with your provider router and existing setup. | If I want to keep my provider router, I want to add Wi-Fi without unnecessarily replacing its network functions. Around 17% of consumers put this compatibility first. |
| Cost and maintenance | Try taking measurements and repositioning your equipment first; then check the number of units you need and whether updates are available. | If I want to avoid unnecessary purchases, I want to know first whether repositioning the equipment or changing the settings will solve the problem. Around 8% of consumers put cost and maintenance first. |
A problem with your provider’s connection needs a different solution from weak Wi-Fi in one particular area.
First, test the connection using an ethernet cable and compare it with the Wi-Fi at your workshop spot.
Distance, walls, ceilings and positioning all affect the signal. A stated range is not a measurement of coverage in your home.
Test the areas where you use Wi-Fi, then work out how many points you need.
TP-Link specifies PoE for the Deco X50-PoE in particular; it’s a different version from the standard X50.
Before buying, check the full model name, version and power requirements. A PoE setup may require compatible power equipment and cabling.
How mesh points connect varies depending on whether you use router or access point mode. TP-Link warns that an incorrect connection in router mode can create a network loop.
Decide which device will retain the router function and follow the connection instructions for the mode you’ve chosen.
The Deco X50 range is worth considering if you’re looking at a mesh setup with several points. The Deco X50-PoE is a separate version for a PoE installation.
The RT-AX58U is a standalone Wi-Fi 6 router that can also be used as an access point or AiMesh node.
The FRITZ!Repeater 3000 AX extends an existing Wi-Fi network; it isn’t a direct alternative to a standalone router.
This selection includes a standalone router and mesh kits for Wi-Fi in one or more areas. Before buying, check that the exact version meets the applicable requirements and carries the required CE marking.
No image available
A mesh option to consider if you want to extend Wi-Fi to several areas and may want to keep your provider router.
No image available
A standalone router to consider if one well-positioned Wi-Fi point could be enough for your workshop spot.
No image available
A mesh kit with several units to consider if you need Wi-Fi in different areas of the loft.
No image available
A mesh router to consider if you want Wi-Fi in several areas; check that this version will work with your existing network before buying.
No image available
A mesh router to consider if you want to extend Wi-Fi to several areas and have checked the compatibility requirements.
First, test the internet connection on a computer using an ethernet cable, then compare it with the Wi-Fi at your workshop spot. If the wired connection repeatedly performs poorly, contact your provider about the connection first.
Yes. TP-Link describes an access point mode for Deco that lets your existing router continue to manage the network functions. Check the manual for your exact model and connect the points according to the mode you’ve chosen.
According to ACM ConsuWijzer, you have the right to choose your own router. A provider may refuse a device if it doesn’t meet the same safety requirements; you may also need provider settings to connect it.
The Dutch Authority for Digital Infrastructure states that radio equipment sold in Europe must meet the applicable requirements and carry a CE marking. Since 1 August 2025, stricter digital security requirements have also applied to the wireless equipment covered by those rules. Check the exact version; a general product listing doesn’t establish whether a specific item complies.