Which solution is right for you?

Streamers with a weak signal in the loft

If films tend to buffer mainly in the loft, check the signal strength there and consider the distance and obstacles between the router and the device you’re watching on. Consumentenbond points out that ceilings, among other things, can interfere with the Wi-Fi signal.

Streamers with an Ethernet cable in the loft

If you have a cable available, check whether a wired Wi-Fi access point or a wired connection near your viewing spot would work for you. Consumentenbond notes that you don’t always need a new router or extender to improve your Wi-Fi.

Streamers with weak Wi-Fi in several rooms

If you have problems not just in the loft but in other rooms too, compare how many Wi-Fi access points you need and where you can position them. Consumentenbond recommends placing extenders where you need extra coverage.

What should you look for when choosing?

Start by measuring the connection at your viewing device and comparing it with the connection near the router. This will help you decide whether to keep your current setup, add a wired Wi-Fi access point or use mesh access points to cover several rooms.

What to consider What to look for when buying Who is this important for?
Coverage where you watch Measure at your viewing device and compare the result with a measurement near the router; consider distance and ceilings. If you mainly want to fix a patchy connection in the loft, prioritise coverage there. Around 42% of consumers in this loft scenario put this need first.
An available Ethernet cable Check the cable route, Ethernet ports and support for access point mode or Ethernet backhaul on the exact model. If there’s a cable running to the loft, you’ll want to know whether you can connect a Wi-Fi access point or streamer to it. For around 33% of consumers, a wired connection is the main priority.
Coverage in several rooms Map out weak spots and check how many access points you need and whether they work with your provider’s equipment. If other rooms have poor coverage too, you’ll want to be able to position Wi-Fi access points in several suitable locations. This is the priority for around 25% of consumers.

Common buying mistakes

  • Assuming a high advertised Wi-Fi speed guarantees a good picture in the loft

    Your actual connection also depends on distance and obstacles such as ceilings. An unstable connection can reduce video quality.

    Measure the connection where you watch before choosing a device based on its advertised speed.

    If coverage is still poor, you may need an additional Wi-Fi access point or a cable connection.

  • Setting up a mesh access point without checking the connection

    An additional access point needs to be able to get a usable connection to the network. Ethernet backhaul only works if the access points can be connected by cable.

    Plan where each access point will go, and check the cable route and connections in advance. If you don’t have a cable, the wireless connection needs to be usable at the chosen location.

  • Confusing a repeater with a standalone main router

    FRITZ! describes the FRITZ!Repeater 1200 AX as an extension to an existing network, not a replacement for the main router.

    Check whether you need a main router, an additional Wi-Fi access point or a complete mesh system, and which features work with your current router.

Brands to consider

TP-Link

The Deco X50 is a mesh system, while the Archer range includes standalone routers. So focus on the product type and the setup you need, not just the brand name.

  • TP-Link lists three gigabit ports per Deco X50 unit, with 1-, 2- and 3-pack options.
  • The maximum coverage quoted by the manufacturer for a 3-pack isn’t a measurement taken in your loft.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router with features including access point and AiMesh node modes.

  • ASUS lists one gigabit WAN port and four gigabit LAN ports.
  • The specifications differ between V1 and V2. Check which version is on offer; quoted radio speeds don’t guarantee a particular speed in your loft.

FRITZ!

The FRITZ!Repeater 1200 AX is designed to extend an existing network, for example with a compatible FRITZ!Box as the Mesh Master.

  • FRITZ! lists one gigabit LAN port for a wired network connection.
  • Check which mesh features are available with your existing router; the repeater isn’t a standalone replacement for your main router.

Wi-Fi products at Joybuy

This selection includes a standalone router, an additional Wi-Fi access point with an Ethernet connection, and mesh systems with multiple access points. The right option depends on your measurements in the loft, whether you have cabling and the coverage you need in other rooms.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A mesh kit with two access points for setups that need multiple Wi-Fi access points.

The product description lists Wi-Fi 7, three frequency bands and multi-gigabit ports. Wired and wireless backhaul are supported.

View at Joybuy
Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

An access point for a setup with a wired Ethernet uplink to the network.

The product description lists Wi-Fi 7, a 2.5 Gigabit Ethernet uplink and PoE+ power. Use compatible PoE+ equipment to power it.

View at Joybuy
TP-Link TL-WR802N V4 router

TP-Link TL-WR802N V4

A standalone router for anyone considering a router-based setup. Compare its stated port speed with the connections you need.

The product description lists Wi-Fi 4 on 2.4 GHz, a maximum wireless data rate of 300 Mbit/s and one network port up to 100 Mbit/s.

View at Joybuy
TP-Link Deco X20 AX1800 mesh system, 2-pack

TP-Link Deco X20 AX1800, 2-pack

A mesh kit with two access points for anyone who wants to position multiple units and can use Ethernet backhaul.

The product description lists Wi-Fi 6, a maximum speed of 1800 Mbps, two mesh units and Ethernet backhaul.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A standalone router option for anyone looking for a router, with the option to add a compatible ASUS AiMesh system later.

The product description lists Wi-Fi 6, MU-MIMO and OFDMA. Expansion is designed for compatible ASUS routers.

View at Joybuy

Frequently asked questions

Should you buy a new router straight away if a film buffers in the loft?

No. First, measure the connection at your viewing device and, if needed, try moving your existing router or changing its settings. Also compare the connection near the router: buying Wi-Fi equipment won’t fix a problem with your incoming internet connection.

How can you add Wi-Fi without replacing your provider’s equipment?

Check whether your chosen system has access point mode. TP-Link lists both router and access point modes for the Deco X50; the right setting depends on how your existing network is set up.

What should you keep up to date or check after installation?

Keep the firmware up to date and check that the router is set to the correct country. ACM ConsuWijzer highlights the importance of updates for personal equipment, while the Dutch Authority for Digital Infrastructure warns that the wrong country setting can cause interference.

Can you choose your own router, and what else should you bear in mind?

According to ACM ConsuWijzer, consumers in the Netherlands are free to choose their own router, although a provider may reject an unsafe device. Consider any cabling, additional Wi-Fi access points and paid features when making your choice. What you need depends on your setup and your provider’s equipment.

What rules apply to Wi-Fi routers in the Netherlands?

The Dutch Authority for Digital Infrastructure states that Wi-Fi routers must carry the CE marking. According to the authority, home Wi-Fi is usually licence-exempt as long as you follow the conditions of use. Check the marking and the applicable EU version of the specific product.