Who is this guide for?

Reader with poor loft coverage

Your downloads in the converted loft keep dropping out or take a long time to start. You want to find out whether moving your router or adding another Wi-Fi point might help.

Resident with a cable to the loft

You have an Ethernet connection in the loft, or can install one, and want a dedicated Wi-Fi point connected by cable.

Resident without a new cable

You want to extend Wi-Fi across several floors without running a cable, and need to find a suitable spot for a mesh node where the main network signal is still strong enough.

Which buying considerations matter?

Start by checking the signal where you read. Then choose between moving your router, adding a wired access point or setting up mesh, depending on the cable routes available.

Move your current router

Choose this if: a more open, central position could improve reception in the loft.

Bear in mind: you may need longer cables, or to speak to your provider if you want to move a provider-supplied modem.

Wired access point

Choose this if: there’s an Ethernet cable running to the loft, or you’re planning to install one.

Bear in mind: you’ll need to install a cable and, depending on the model, provide a suitable power supply.

Mesh Wi-Fi system

Choose this if: you want to cover several floors without installing a new cable, and can position an additional node where the connection is still usable.

Bear in mind: a wireless node still depends on its connection to the main unit. The advertised coverage area doesn’t tell you what signal you’ll get in your loft.

Your own router instead of your provider’s router

Choose this if: you also want to change your router features and configure the connection yourself.

Bear in mind: being free to choose your router doesn’t mean every device can replace your modem without configuration. Nor will a different router downstairs necessarily improve the signal through the loft floor.

The Consumers’ Association (Consumentenbond) identifies walls and ceilings as factors that can disrupt Wi-Fi. So test the connection where you read and download magazines, and compare it with the signal by your current router.

Consideration What to look for when buying Who is this most relevant to?
Signal through the loft floor Test the connection where you read and compare it with the signal close to your current router. Also check whether you could put the router in a more open position. If I read upstairs and my downloads get stuck, I want to know whether moving the router or adding another node could make a difference. Around 36% of consumers rank loft coverage as their top priority.
Reliable downloads Check whether there’s a cable route to the loft and what type of Ethernet connection your chosen Wi-Fi point needs. I want to download magazines in the loft without a wireless connection between floors becoming the weak link. Around 29% of consumers prioritise reliable downloads.
Connection to your provider’s router Decide whether you want to extend your Wi-Fi or replace your router. If replacing it, check which provider settings are required; if extending it, check how the new equipment connects. If I’d rather not change my provider connection unnecessarily, I’m looking for an extension that works with my current setup. Around 21% of consumers prioritise ease of connection.
Management, security and costs Check how many nodes and what type of power supply you’ll need, whether PoE is suitable for your setup, and how you’ll manage updates and strong passwords. I want to understand in advance what equipment and settings my loft connection will need, without paying for features I don’t need. Around 14% of consumers weigh up management and costs first.

Buying pitfalls

  • Buying only a faster router downstairs to fix poor coverage in the loft

    Distance, floors and other obstacles can weaken the signal. A router’s higher advertised speed won’t automatically overcome that loss of coverage.

    First, test the position of your current router and the signal in the loft. Only then choose an extension, based on the signal that reaches the space.

  • Placing a wireless mesh node where the existing signal already drops out

    The additional node still needs to be able to connect to the rest of the network.

    Try an intermediate position where the signal is still usable. If there’s a cable to the loft, use a wired connection.

  • Confusing PoE or an access point with a complete router setup

    PoE requires a compatible power supply. An access point doesn’t automatically replace the router functions of your provider’s device.

    Before buying, check the power method and the device’s role in your network. Make sure you have the necessary PoE equipment and cable.

  • Assuming the legal guarantee always lasts exactly two years

    According to ACM ConsuWijzer, the legal guarantee in the Netherlands depends on what you could reasonably expect from the product; a fixed period of exactly two years doesn’t fully reflect this.

    If something goes wrong, contact the retailer and explain the problem and when you bought the product.

Relevant brands to consider

TP-Link

The Deco range is worth considering for a mesh setup. TP-Link says the Deco X50-PoE can also be mounted on a wall or ceiling and powered via PoE.

  • TP-Link lists two 2.5Gbps ports and PoE or DC power for the Deco X50-PoE.
  • The advertised specifications don’t prove that it will provide coverage in a particular converted loft. Check that the power supply and exact model suit your setup.

ASUS

The ZenWiFi XD5 is a multi-node system for extending Wi-Fi across different rooms.

  • ASUS lists Ethernet backhaul and compatibility with older Wi-Fi generations for the XD5.
  • Advertised speeds and coverage areas aren’t measurements taken in your home. ASUS also notes regional restrictions on using 160MHz.

FRITZ!

The FRITZ!Repeater 1200 AX is an option for extending an existing network, particularly if you already use a FRITZ!Box.

  • FRITZ! lists one gigabit LAN port and a LAN connection to a FRITZ!Box for mesh. The brand also says it works with other routers.
  • If you have a different router, don’t assume you’ll get the same FRITZ! mesh features.

Ubiquiti

The UniFi U6+ is an access point for a wired connection in the loft, managed through UniFi Network.

  • Ubiquiti’s official specifications list one gigabit Ethernet port and PoE power.
  • An access point doesn’t replace your provider’s router on its own. Check that PoE power and the management features you want suit your setup.

Joybuy products for Wi-Fi in the loft

This selection includes mesh kits for extending Wi-Fi across several floors, wired access points and a Wi-Fi extender. Choose based on the cable routes available and the signal where you want to place the additional node.

TP-Link Deco X20 AX1800 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X20 AX1800 Wi-Fi 6 mesh system, 2-pack

A good fit if you want to extend Wi-Fi to several areas of your home and can use Ethernet backhaul.

TP-Link describes a set with two Deco X20 units, supporting Wi-Fi 6 and Ethernet backhaul. A wirelessly connected node still depends on having a usable connection to the rest of the network.

View at Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point

TP-Link Omada EAP653 Wi-Fi 6 access point

A good fit for a dedicated loft Wi-Fi point if you can connect the device to your existing router with an Ethernet cable.

The product information lists one gigabit Ethernet port, PoE, a DC input, and wall or ceiling mounting. PoE requires a compatible power supply; as an access point, the device needs a wired connection to your existing router.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system, 2-pack

A good fit for a two-node mesh setup if you can use PoE power in your installation.

TP-Link lists Wi-Fi 6, dual-band on 2.4 and 5 GHz, two Ethernet ports per unit and PoE support. PoE requires compatible equipment; a wirelessly connected node still depends on its connection to the main network.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point and Wi-Fi extender

A good fit if you want to extend an existing Wi-Fi network and can place the device within range of it.

The product name lists 2.4 GHz, up to 300 Mbps, two antennas and passive PoE. The stated operating modes are access point and extender; as an extender, the device still needs to be able to connect to the existing Wi-Fi network.

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh system, 3-pack

TP-Link Deco XE75 tri-band Wi-Fi 6E mesh system, 3-pack

A good fit if you’re looking for a three-node mesh setup and want to connect devices to one of the units by cable.

The product information lists tri-band on 2.4, 5 and 6 GHz, Wi-Fi 6E, three units and three Ethernet ports per unit. A wirelessly connected mesh node still depends on having a usable connection to the main network.

View at Joybuy

Frequently asked questions

How can I tell whether Wi-Fi in the loft or my internet connection is slowing down my downloads?

First, compare a wired test by the router with the signal in the loft. The Consumers’ Association (Consumentenbond) recommends using a wired computer to test your internet connection, so weak Wi-Fi doesn’t skew the results. Then test where you download magazines.

Can I use an access point without replacing my provider’s modem?

Yes, you can connect an access point to your existing router with an Ethernet cable. Check how your chosen model connects and is powered; a PoE model requires a compatible PoE power supply.

How can I keep my own router secure?

Use a strong password and keep the software up to date. The Dutch Data Protection Authority (Autoriteit Persoonsgegevens) recommends using a strong password for your router or Wi-Fi network. ACM ConsuWijzer also outlines the security requirements for equipment you connect to your provider’s network.

Do I have to use my internet provider’s router in the Netherlands?

No. According to ACM ConsuWijzer, you’re free to choose your router. If you also want to connect your own modem, your provider’s connection and security requirements apply; ask them which settings you need if necessary.

Who should I contact if my router breaks too soon?

If you want to make a claim under the legal guarantee, contact the retailer first. ACM ConsuWijzer explains that the legal guarantee in the Netherlands depends on what you could reasonably expect from the product, rather than simply lasting for a fixed period of two years.