Who should consider these options?

Remote worker with weak Wi-Fi in the loft

If your connection works downstairs but is unreliable in your study, range, placement and whether you can run a cable upstairs are all important considerations. Consumentenbond and Bright describe practical ways to assess your connection and coverage.

Household with several simultaneous streams

When several screens are in use at once, both your internet speed and the connection between your home network and those screens matter. Netflix Help Centre provides separate guidance on the connection required for a single 4K stream.

Resident without a cable route to the loft

If you can’t run a network cable upstairs, check whether a wireless extension will work with your existing network in a location with a sufficiently strong signal. KPN, for example, explains the provider-specific terms for rented SuperWifi points.

What should you look for when buying?

Start by checking whether the issue is with your internet connection or just the Wi-Fi in your loft. Then choose between a wired access point, wireless mesh or an extension from your provider.

Check your existing router

When: if you’re not yet sure whether your internet connection is slow or it’s just the Wi-Fi in your loft.

Trade-off: changing the router’s position could save you buying new equipment, but it may not be practical in every home and won’t overcome every obstacle between floors.

Wired access point or mesh node

When: if you can run a network cable upstairs and need a fixed connection there.

Trade-off: running a cable takes work. A port used to connect the nodes won’t also be available for another device.

Wireless mesh system

When: if you can’t run a cable between floors and need Wi-Fi in several locations.

Trade-off: the connection between mesh nodes shares capacity with other network traffic. Place each node where it can still get a usable connection to the previous one.

Extension from your provider

When: if your provider offers suitable Wi-Fi points and help with installation or management.

Trade-off: compare the purchase and rental terms. KPN states that rented SuperWifi points only work with KPN Internet.

Consideration What to look for when buying Who is this important for?
Coverage and placement in the loft Test the signal in the loft and at potential intermediate points. Check whether you can expand the system with extra nodes and whether the model you choose supports wired backhaul. If I work in the study, I want to know whether a Wi-Fi point there can still connect to the network. Around 36% of consumers rank loft coverage above other buying priorities.
Capacity for simultaneous streams Count the screens used at the same time and decide what picture quality you want. Netflix Help Centre recommends a stable connection of 15 Mbps or higher for a single 4K stream; this isn’t a requirement for multiple streams combined. If several screens are streaming at once, I also want to check that my broadband connection and Wi-Fi can handle it. Around 29% of consumers give simultaneous streams their highest priority.
Wired connection in the study Check whether you can run a cable upstairs, whether the model supports Ethernet backhaul and how many Ethernet ports the version you choose has. If I want to connect a computer or Wi-Fi point upstairs by cable, a wired connection matters most to me. Around 21% of consumers prioritise a fixed connection upstairs.
Cost and existing equipment Compare how many nodes you need and check how the system you choose works with your modem. If you’re considering equipment from your provider, check the purchase or rental terms too. If I want to keep using my current modem, I want to know whether an extension will do the job instead of buying a whole new system. Around 14% of consumers prioritise cost and keeping their existing equipment.

Common buying mistakes

  • Choosing a higher advertised speed without testing first

    Your internet connection could be the bottleneck. A wired test helps you tell the difference between this and weak Wi-Fi in the loft.

    First, test using a computer connected with a network cable, then compare the result with tests in the loft and wherever you stream.

  • Placing a wireless mesh node where the source signal is already almost gone

    A mesh node still needs a usable connection to the previous node, so the place where you want to use Wi-Fi isn’t always the best place for the node.

    Try an intermediate location or, where possible, use a cable between the nodes.

    You may need an extra node or have to run a cable after all.

  • Choosing your provider’s Wi-Fi points without checking the terms

    KPN states that rented SuperWifi points can only be used with KPN Internet.

    Before buying or renting, check the terms and compatibility with your existing equipment.

    You may need to replace them if you switch to another provider.

Brands to consider

TP-Link

The Deco X50 range is worth considering if you’re looking for an expandable Wi-Fi 6 mesh system.

  • TP-Link lists three Gigabit ports per unit and optional Ethernet backhaul for the Deco X50.
  • The stated coverage and combined AX3000 speed are manufacturer claims, not measurements taken in your home. Also check whether the version you choose includes one, two or three units.

FRITZ!

The FRITZ!Repeater 3000 AX is an extension point for anyone looking to add Wi-Fi in the loft, for example to an existing FRITZ!Box.

  • FRITZ! lists three radio bands and two Gigabit LAN ports. According to FRITZ!, the repeater can be connected via LAN, and it can also be used with other routers.
  • This is a repeater or access point, not a replacement modem router. Check separately whether its mesh integration is compatible with your other router.

Linksys

Velop Pro 6E is a mesh option for anyone considering 6 GHz as well as wired or wireless backhaul.

  • Linksys lists Gigabit Ethernet and support for both wired and wireless backhaul.
  • Linksys claims about coverage and simultaneous streaming are manufacturer claims; they don’t predict how the signal will travel through the floors of your home.

KPN

SuperWifi points are a provider-specific way for existing KPN customers to extend their network, with installation and management through MijnKPN.

  • According to its own information, KPN offers the option to buy or rent, as well as an app with help finding the right placement.
  • KPN states that rented SuperWifi points only work with KPN Internet, so check the terms before choosing.

Joybuy products

This selection includes mesh systems and mesh routers for Wi-Fi in several places around your home. When choosing, check how many units you need and whether you can run a cable between them.

TP-Link Deco BE68 mesh system with two units

TP-Link Deco BE68, 2-pack

Suitable if you want to extend Wi-Fi to several places with a mesh system made up of two units.

The description lists Wi-Fi 7, tri-band and both wired and wireless backhaul.

Each unit is listed with 10, 2.5 and 1 Gbit/s WAN/LAN connections.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system with three units

TP-Link Deco X50, 3-pack

Suitable if you want to extend Wi-Fi 6 to several places with a mesh system made up of three units.

The description lists Wi-Fi 6 and optional Ethernet backhaul.

The manufacturer lists three Gigabit ports per unit.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 mesh router

Huawei eKit OptiX FG736 BE3600, dual-band Wi-Fi 7

Suitable if you want to extend a mesh network with one network name to several places.

The description lists setup through the SmartLife app and support for multiple devices at once.

View at Joybuy
Linksys Velop Pro 7 tri-band mesh Wi-Fi system

Linksys Velop Pro 7, tri-band Wi-Fi 7

Suitable if you’re considering an expandable mesh Wi-Fi system with app-based management.

The description lists the option to expand with compatible Linksys Cognitive Mesh devices.

View at Joybuy
TP-Link Deco XE75 Wi-Fi 6E mesh system with three units

TP-Link Deco XE75, 3-pack

Suitable if you’re considering a mesh system made up of three units with tri-band Wi-Fi 6E.

The description lists three Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Should you immediately upgrade to a faster broadband package if streams keep buffering in the loft?

No. First, test your internet connection using a computer connected by network cable, then compare it with the Wi-Fi in the places where you use it. This helps you find out whether the connection itself or your home Wi-Fi is the bottleneck.

Where should you place an extra Wi-Fi point?

Place it where it can still get a usable connection to the previous point, and check this with tests. If you can run a cable upstairs, compare the results with a wired connection. TP-Link lists Ethernet backhaul for the Deco X50, while FRITZ! describes a LAN connection for the FRITZ!Repeater 3000 AX.

Can you use your own router in the Netherlands?

According to ACM ConsuWijzer, you have the right to use your own router, but a provider may refuse a device if it is unsafe. You may also need your provider’s settings to connect it.

Which marking should you check on a Wi-Fi router?

Check that the specific version carries the required CE marking. The Dutch Authority for Digital Infrastructure also states that stricter digital security requirements apply to wireless equipment placed on the European market from 1 August 2025.

What should you consider with provider Wi-Fi points and rental?

Before choosing, check the terms, compatibility with your current equipment and whether buying or renting better suits your needs. KPN states that rented SuperWifi points only work with KPN Internet.