Who is this guide for?

Planning cables for two rooms

You can run cables to the hobby room and loft, and want a Wi-Fi access point in each with a wired connection. TP-Link and ASUS describe Ethernet backhaul for their mesh systems.

No route for cables

You want to reach both rooms without running new network cables, and can test intermediate Wi-Fi nodes in places where the signal is still strong. Ziggo recommends placing wireless nodes where Wi-Fi is still usable.

Already using a Wi-Fi system

You want to check first whether a compatible access point can extend coverage to both rooms within your current router or provider setup. FRITZ! describes integration with a FRITZ!Box; KPN offers its own Wi-Fi points, with terms that depend on your subscription and equipment.

What should you consider when setting up Wi-Fi in two rooms?

Wired access points or mesh

Choose this if: you have, or can run, cables to the hobby room and loft.

Bear in mind: running cables takes work and may require extra materials. Also check that the system supports Ethernet backhaul.

Wireless mesh

Choose this if: running cables isn’t practical and you can place the nodes where the existing Wi-Fi signal is still strong.

Bear in mind: a node placed where there’s no usable connection can’t reliably pass on the signal.

Extending your current system

Choose this if: you have a FRITZ!Box or a provider setup with a compatible additional Wi-Fi point available.

Bear in mind: features and setup vary between systems. FRITZ! describes how Wi-Fi settings are transferred when used with a FRITZ!Box.

Powerline with Wi-Fi

Choose this if: the Wi-Fi signal struggles to pass between floors and running a data cable isn’t practical.

Bear in mind: the connection depends partly on the sockets and electrical wiring. Test the adapters in the locations you plan to use.

What to consider What should you check? Who is this important for?
Reliable coverage in both rooms Check the cable route, how many nodes you need and whether Ethernet backhaul is supported. I want a wired Wi-Fi access point in both the rear hobby room and the loft; a reliable wired connection is the top priority for around 36% of consumers.
Coverage without running new cables Find a spot where Wi-Fi still works well and check where you can power the intermediate nodes. I don’t want to run new network cables and can test intermediate nodes in different locations; cable-free coverage is the top priority for around 29% of consumers.
Compatibility with your current router Make a note of your modem or router model and check the required mode and available network features. I want to keep using my existing router or provider system; keeping it is the main priority for around 21% of consumers.
Connection over the mains Check whether the kit includes a Wi-Fi adapter for the room and test the sockets you plan to use. If cables and wireless placement are difficult, I want to know whether powerline will work with my sockets; a mains-powered alternative is the top priority for around 14% of consumers.

Common buying mistakes

  • Placing a wireless mesh node where the Wi-Fi signal has already dropped out

    The additional node needs a usable connection to the network itself to pass on the Wi-Fi signal.

    First, find an intermediate spot with good reception, then test the connection in both rooms at the edge of the network.

  • Assuming every mesh system connects wirelessly to your provider’s router

    According to TP-Link, the main Deco unit must be connected to the existing network with a cable. Satellite Deco units can then connect wirelessly to the Deco network.

    Before you buy, check how the main unit connects and which operating mode you’ll need.

  • Assuming the advertised powerline speed is what you’ll get at home

    devolo warns that some sockets can result in low transfer speeds, and that sources of electrical interference can affect performance.

    Test the adapters in the sockets you actually plan to use before choosing this option for both rooms.

  • Choosing access point mode without checking which features change

    With Deco, the existing router manages connected devices, and some features aren’t available in the Deco app.

    Decide in advance which router or app should manage your network features.

Brands to compare

TP-Link

The Deco X50 range offers mesh with optional Ethernet backhaul. A three-node kit may be suitable if each room needs its own node.

  • According to TP-Link, each Deco X50 unit has three gigabit ports.
  • Deco can be used in access point mode with an existing router.
  • The main Deco unit can’t connect wirelessly as a repeater to any existing router. In access point mode, some features aren’t available in the Deco app.

ASUS

The ZenWiFi XD5 is a mesh system for several rooms and supports Ethernet backhaul if you have wall sockets for network connections.

  • ASUS describes wired connections between XD5 nodes and support for older Wi-Fi devices.
  • The stated Wi-Fi speed is a specification measured under certain conditions, not a measured speed in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend a FRITZ!Box setup. It can also be used with another router.

  • According to FRITZ!, the model has two gigabit LAN ports and can connect to a FRITZ!Box via LAN.
  • Automatic transfer of Wi-Fi settings is described for use with a FRITZ!Box. Don’t assume this applies to every router without checking.

devolo

Magic 2 WiFi next is a powerline option for a room where it’s difficult to run a network cable.

  • devolo lists two gigabit LAN ports on the Wi-Fi adapter.
  • The manufacturer warns that some sockets can result in low transfer speeds. Magic adapters are also incompatible with dLAN adapters.

KPN

KPN Wi-Fi points are a provider option to look into if you already use a compatible KPN home network.

  • KPN offers help with placement and options for its own Wi-Fi points.
  • Compatibility and any rental terms depend on your subscription and existing equipment.

Joybuy products

These Joybuy products are Deco mesh systems with several Wi-Fi nodes, for wireless coverage or a setup with a wired connection between nodes.

TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 3-pack

The three units are designed to extend Wi-Fi to several areas of your home.

Dual-band Wi-Fi 5 (802.11ac); two Ethernet ports per unit. The Deco units work together as a mesh network and support roaming between units.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 3-pack

A three-node mesh kit for several rooms. TP-Link describes optional Ethernet backhaul between Deco units.

Dual-band Wi-Fi 6 (802.11ax). When used alongside an existing router, the main Deco unit must be connected with a cable. Some features aren’t available in the Deco app when using access point mode.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack

TP-Link Deco X50-PoE 2-pack

This two-node mesh system is designed for a wired PoE setup.

Dual-band Wi-Fi 6 (802.11ax). The described PoE setup requires an Ethernet cable to each unit.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro 3-pack

The three-node mesh kit is designed to extend Wi-Fi to several areas of your home.

Tri-band Wi-Fi 6E (2.4 GHz, 5 GHz and 6 GHz); three Ethernet ports per unit.

View at Joybuy
TP-Link Deco XE75 mesh system, 3-pack

TP-Link Deco XE75 3-pack

Three mesh nodes are designed to provide Wi-Fi in several areas. The Ethernet ports let you connect wired devices.

Tri-band Wi-Fi 6E (2.4 GHz, 5 GHz and 6 GHz); three gigabit Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Do I need to replace my provider’s router?

Not necessarily. TP-Link describes an access point mode for Deco that works alongside an existing router. The main Deco unit must be connected with a cable, and you should also check which features aren’t available in the Deco app in this mode.

Where should I place an additional wireless Wi-Fi point?

Place it somewhere with a good connection to the existing network, rather than in a room where there’s no coverage. Then test the hobby room and loft separately. Ziggo also describes the option of connecting its Wi-Fi points with a cable.

What can I do if powerline performance is disappointing?

Test the adapters directly in the wall sockets you plan to use. devolo lists power supplies, chargers and dimmers as possible sources of interference. If they affect the connection, move the adapter or try another socket.

Do I need a permit or registration for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies and under the applicable conditions of use does not require notification or registration. When buying, also check that the equipment has the correct mandatory CE marking.

What should I know about updates and the guarantee?

Keep your router software up to date. If a product is faulty, you retain your statutory rights against the seller under Dutch law. ACM ConsuWijzer explains that your statutory guarantee still applies if a seller or manufacturer offers less cover than you’re entitled to by law.