Who is this guide for?

Watching a lecture on another floor

You mainly need coverage in one regular viewing spot. TP-Link recommends placing a repeater where the router signal is still strong enough.

Watching on several floors

You use different rooms or move around and need coverage in more places. The Consumers’ Association describes extending Wi-Fi across several rooms and floors as a separate use case.

Watching behind signal-blocking floors

The existing signal struggles to reach the other floor. In that case, it’s worth considering a wired connection or powerline with Wi-Fi; devolo describes powerline as a connection that uses your home’s electrical wiring.

What should you look out for?

One wireless repeater

A good fit if: you mainly watch in one spot and can find a midway point there that still gets a strong router signal.

Bear in mind: floors and obstacles can weaken the connection between the router and repeater.

Wired access point or mesh point

A good fit if: you can run a network cable to or near the spot where you watch lectures.

Bear in mind: you’ll need a suitable cable route and the right ports or operating mode.

Several wireless mesh points

A good fit if: you watch on different floors or move between viewing spots.

Bear in mind: extra points cost more and need power, and each must maintain a usable connection to the network.

Powerline with Wi-Fi

A good fit if: running a network cable isn’t practical and the wireless signal struggles to pass through the floors.

Bear in mind: performance also depends on interference and the quality of your electrical wiring, so test the kit at home.

What to consider What should you check? Who particularly values this?
Connection between floors Test the router signal at the intended midway point; if it’s weak, compare a cable or powerline option. If I can’t afford interruptions to my live lecture because of a weak connection, I want to know whether the Wi-Fi point itself maintains a good connection to the router. Around 36% of consumers prioritise a stable connection between floors.
Coverage in several viewing spots Map the rooms and floors you use, and check how many Wi-Fi points are included in the kit. When I watch in more than one spot, I want coverage there without assuming that one point will cover several floors. Around 29% of consumers prioritise coverage in several viewing spots.
Installation without a network cable Check whether there’s a suitable midway position for a repeater; test powerline in the sockets you plan to use. If I can’t run a network cable, I want a solution that’s practical to set up in my home. Around 21% of consumers prioritise installation without a network cable.
Total cost and support Compare the complete kit, number of points, power consumption and support. When choosing a system with several points, I want to take the kit I need and the support available into account. Around 14% of consumers prioritise total cost and support.

Common buying mistakes

  • Putting a repeater where there’s no router signal

    A wireless repeater needs to receive the router’s signal first. It can’t simply restore the connection in a spot where Wi-Fi has already dropped out.

    Before buying, find and test a midway point where the router signal is still strong. If floors weaken the connection, compare wired options too.

  • Assuming the advertised Wi-Fi or powerline speed is the speed you’ll get for your lecture

    The stated maximum doesn’t automatically tell you what connection you’ll get in your viewing spot. The Consumers’ Association includes speeds in several locations in its testing approach; devolo says that interference and the quality of your electrical wiring can affect powerline performance.

    Check the connection where you’ll watch, using the device you’ll follow the lecture on, rather than comparing figures on the packaging alone.

  • Confusing a Deco X50-PoE with a standard Deco X50

    The Deco X50 and X50-PoE are different models with different port configurations. According to TP-Link, the standard Deco X50 has three gigabit ports per unit; check the X50-PoE model’s specifications separately.

    Check the full model name and the number and type of ports before choosing a version. Don’t base your decision on the Deco X50 name alone.

  • Considering just one Wi-Fi point when you need coverage across several floors

    You may need a system with several points for different viewing spots. Extra points use power, and the Consumers’ Association includes energy consumption in its testing approach.

    Compare the full system with the places where you actually watch.

Brands to compare

TP-Link

The RE705X is a standalone repeater with access point mode; the Deco X50 is an expandable mesh system. These are different product options, and neither guarantees coverage in a particular home.

  • According to TP-Link Netherlands, the RE705X has one gigabit Ethernet port and OneMesh works with a compatible OneMesh router. The standard Deco X50 has three gigabit ports per unit.
  • Check that your router supports the mesh feature you want and whether the points connect wirelessly or by cable.

FRITZ!

The FRITZ!Repeater 3000 AX is a tri-band repeater that’s particularly relevant if you want to extend an existing FRITZ! mesh network.

  • FRITZ! lists two gigabit LAN ports and mesh compatibility with a FRITZ!Box.
  • Check that your current router is compatible with the mesh network you have in mind, and confirm which model you’re buying.

devolo

The WiFi 6 Repeater 5400 is a repeater; Magic 2 WiFi 6 next is a separate powerline-with-Wi-Fi option.

  • devolo describes a received-signal-strength indicator on the Repeater 5400 and a connection through electrical wiring for Magic.
  • According to devolo, interference and the quality of your electrical wiring can affect the actual powerline connection. The two product ranges are not the same.

ASUS

The RP-AX58 is a repeater that can work in an AiMesh network with a compatible ASUS AiMesh router.

  • ASUS says the model can also be used as an extender with other routers.
  • The product page consulted is for the United States. Before buying, check the model and support available in the Netherlands.

Joybuy products for mesh coverage

These TP-Link Deco mesh kits are designed to provide coverage in several viewing spots; check the number of units and connections included in each kit. The Dutch Authority for Digital Infrastructure points out that wireless equipment must meet the applicable European requirements and carry the CE marking on the device. Check this for the specific model.

TP-Link Deco X50, 3-pack, Wi-Fi 6

TP-Link Deco X50, 3-pack, Wi-Fi 6

For anyone looking to build mesh coverage across several floors with three Deco X50 units.

Wi-Fi 6; three gigabit Ethernet ports per unit. Ethernet backhaul is optional.

View on Joybuy
TP-Link Deco X50-PoE, 2-pack, Wi-Fi 6

TP-Link Deco X50-PoE, 2-pack, Wi-Fi 6

For anyone looking to use two X50-PoE mesh units and make use of PoE connections.

Wi-Fi 6; the product name specifies PoE and two Ethernet ports per unit.

View on Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

For anyone considering a Deco XE75 mesh system to provide Wi-Fi in several places.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E. Check the number of units included in the version you choose.

View on Joybuy
TP-Link Deco X50-PoE, 3-pack, Wi-Fi 6

TP-Link Deco X50-PoE, 3-pack, Wi-Fi 6

For anyone looking to use three X50-PoE mesh units to provide coverage in several places.

Wi-Fi 6; the product name specifies PoE and two Ethernet ports per unit.

View on Joybuy
TP-Link Deco X50, 2-pack, Wi-Fi 6

TP-Link Deco X50, 2-pack, Wi-Fi 6

For anyone looking to build mesh coverage in several viewing spots with two Deco X50 units.

Wi-Fi 6; three gigabit Ethernet ports per unit. Ethernet backhaul is optional.

View on Joybuy

Frequently asked questions

Where should you put a wireless repeater?

Put a repeater midway between the router and the viewing spot, somewhere the router signal is still strong. Don’t automatically place it where coverage is worst. TP-Link recommends this approach, but the right spot depends on your home and any obstacles.

Does a repeater need to be the same brand as my router?

Not always for standard Wi-Fi extension, but specific mesh features may require a compatible router. For example, TP-Link says that OneMesh with the RE705X requires a compatible OneMesh router; check the combination you plan to use.

What if powerline drops out during a lecture?

Test the adapters in the sockets you plan to use. According to devolo, factors such as interference on the electrical wiring and the quality of the installation can affect the actual connection; the advertised maximum speed doesn’t guarantee the speed you’ll get in your home.

What costs and guarantees should I consider?

If you’re using several Wi-Fi points, include power consumption and the complete kit in your decision. According to ACM ConsuWijzer, statutory rights under Dutch law apply alongside any seller’s or manufacturer’s guarantee; the seller is your point of contact for statutory rights.

What should I look for in the CE marking on a Wi-Fi repeater?

Check that the CE marking is on the specific device and that you’re looking at the right model. The Dutch Authority for Digital Infrastructure sets out the applicable European requirements for radio equipment; a general product listing doesn’t automatically confirm that a specific model complies.