Which solution is right for you?

Student with a weak signal

If your study is a long way from the router, first check whether a repeater can receive a strong enough signal from a midway position. The Consumentenbond advises placing a Wi-Fi extender where the signal is still good.

Student downloading large files

If you already have Wi-Fi but need to download large course files, check the connection over distance and compare measurements in different locations where possible. The Consumentenbond explains that its Wi-Fi tests measure speeds at various distances and in different locations.

Student with thick walls to contend with

If there’s no suitable spot for a repeater with a strong enough signal, look into whether a cable, mesh system or powerline would work in your home. Devolo warns that sockets and electrical appliances can affect powerline performance.

What should you look for when buying?

Start by checking the connection between your router and study. Then choose a device based on coverage, downloading needs, cabling options and what will work best in your home.

What to consider What should you look for? Who is this important for?
Coverage to your study Find a midway position with a usable signal or consider a wired Wi-Fi access point. If I study at the back of the house, I want to know whether the repeater itself can still receive a signal from the router. Around 36% of consumers put coverage first.
Downloads over distance Compare measurements over distance where available; don’t assume the advertised Wi-Fi speed is the download speed you’ll get in your room. For large course files, I want to know how the connection performs where I study. Around 29% of consumers prioritise download performance over distance.
Getting a connection through obstacles Check whether you can run a cable; test powerline using the sockets you plan to use. If walls or floors affect the wireless connection, I’m looking for another way to connect to my study. Around 21% of consumers put the connection route first.
Installation and compatibility Check compatibility with your router and find out which app, set-up method and mesh features are supported. If I want a solution that works with my router and is easy to manage, I pay particular attention to installation and compatibility. Around 14% of consumers make this their top buying priority.

Common buying mistakes

  • Putting the repeater at the far end of your study

    A wireless repeater needs to receive a usable signal from the router itself. If it doesn’t get good reception where it’s positioned, it won’t improve the connection further away.

    First, try a midway position. If there’s no usable signal there, compare a cable or test powerline rather than relying on a higher advertised Wi-Fi speed.

  • Assuming the advertised Mbps is your guaranteed download speed

    A Wi-Fi specification doesn’t tell you how quickly course files will download in your study. The Consumentenbond measures Wi-Fi speeds in different locations and at different distances.

    Compare measurements over distance where possible, and test the connection where you study.

  • Assuming all devices labelled ‘mesh’ work together

    TP-Link’s OneMesh feature, as described for the RE705X, requires a compatible OneMesh router. The FRITZ! Mesh compatibility described applies to a FRITZ!Box and compatible FRITZ! devices.

    Check the exact router and the mesh feature it supports. Otherwise, assess a standalone Wi-Fi access point based on its standard repeater or access point function.

  • Assuming powerline will work in every home

    According to devolo, some sockets and electrical appliances can interfere with powerline performance.

    Test the adapters in the sockets you plan to use and check that they’re compatible with any existing adapters.

Brands to consider

TP-Link

The RE705X is a standalone repeater; the Deco X50 is a mesh option with multiple access points.

  • According to the product specifications, the RE705X has a gigabit port and access point mode. The Deco X50 supports optional Ethernet backhaul.
  • TP-Link describes OneMesh for the RE705X when used with a OneMesh router; don’t assume it’s compatible with every router.

FRITZ!

The FRITZ!Repeater 1200 AX is a standalone repeater with an Ethernet port, designed in particular for use with a FRITZ!Box.

  • FRITZ! lists Wi-Fi 6, gigabit LAN and compatibility with other routers.
  • The FRITZ! Mesh compatibility described applies to a FRITZ!Box and compatible FRITZ! devices. The advertised wireless speed isn’t a measurement of performance in your study.

devolo

The Magic 2 WiFi next Starter Kit uses powerline to bring Wi-Fi to another room.

  • According to devolo, the starter kit includes two adapters and the Wi-Fi adapter has two gigabit LAN ports.
  • The Magic 2 WiFi next doesn’t work with the older dLAN range. Devolo also notes that certain sockets and electrical appliances can cause interference, so test the set-up you plan to use.

Joybuy products for mesh and a wired Wi-Fi access point

These products focus on mesh systems with multiple Wi-Fi access points and an access point you can connect by cable.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A two-unit mesh system for extending Wi-Fi to a study at the other end of the house.

The product description lists Wi-Fi 7 and support for wireless or wired backhaul.

The listed ports are 10 Gbps, 2.5 Gbps and 1 Gbps; these figures aren’t measurements of download speed in your study.

Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

A mesh set for extending Wi-Fi across multiple access points, with the option of a wired connection between them.

The product name lists dual-band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax); the description mentions optional Ethernet backhaul.

Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

A tri-band mesh system for extending Wi-Fi to another room.

The product name lists 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 6E (802.11ax) and three internal antennas. The description mentions gigabit Ethernet ports and indoor use.

Joybuy
TP-Link Deco X50 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 2-pack, dual-band Wi-Fi 6

A two-unit mesh set for extending Wi-Fi to a room further away.

The product name lists dual-band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax). The description mentions three gigabit ports per unit and optional Ethernet backhaul.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

An access point for creating a Wi-Fi hotspot using an Ethernet cable; the product name also lists a Wi-Fi extender function.

The product description lists access point, range extender and client modes, as well as passive PoE.

The listed specifications are 2.4 GHz Wi-Fi up to 300 Mbps and 10/100 Mbit/s Ethernet ports. These are specifications, not measured download speeds.

Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Place a repeater where it can still receive a good signal from the router, rather than automatically putting it in the room with no reception. The Consumentenbond recommends a midway position; then check the connection in your study.

Will Wi-Fi 6 always make my course downloads faster?

No. Wi-Fi 6 alone doesn’t determine your download speed. A compatible device can make use of the standard’s capabilities, but your connection to the router, the device’s position and your laptop’s Wi-Fi capabilities all play a part too.

What can you do if powerline is slow?

Test the adapters in the sockets you plan to use and see whether electrical appliances affect performance. Devolo recommends plugging its adapters directly into a wall socket where possible; this is the manufacturer’s advice.

Will mesh devices from different systems always work together?

Don’t assume they will: check that the exact router and Wi-Fi access point support the mesh feature you want to use. TP-Link describes OneMesh for the RE705X when used with a OneMesh router; FRITZ! Mesh works with a FRITZ!Box and compatible FRITZ! devices.

What product requirement matters for Wi-Fi equipment in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet the applicable European requirements. The Rijksinspectie Digitale Infrastructuur states that the manufacturer applies the CE mark to compliant devices; seeing a CE mark on a product doesn’t, by itself, verify an individual item.