Who is this guide for?

Home worker with a Wi-Fi dead spot

Your desk is behind a thick internal wall, and you want to find out whether moving the router will help or whether you need an extra access point. Ofcom explains that walls can weaken the Wi-Fi signal.

Home worker with an Ethernet cable

You can run a cable to your workspace and want Wi-Fi or a wired connection there, without a wireless link between access points. TP-Link and ASUS describe Ethernet backhaul as a wired connection option.

Home worker without a cable route

You can’t run an Ethernet cable and want to weigh up whether a well-positioned wireless mesh point or powerline will work in your home. TP-Link and devolo describe these as alternatives, with performance depending on local conditions.

What should you look for when choosing?

Start by checking the connection at your desk and what cabling is available. Then choose between an extra wireless access point, a wired connection between access points or powerline.

Concern What to look for when buying Who is this important to?
Coverage behind internal walls Compare the connection at your desk before and after moving the router to a more central position; then see whether you need an extra access point. If my desk is behind a wall, I want to know whether the connection there is usable before choosing extra equipment. Around 33% of consumers name coverage as their top purchase priority.
Wired connection at your desk Check whether Ethernet can reach your workspace, how many ports the access point has and whether a PoE power supply is available, if needed. If I can run cables to my desk, I want a wired connection without a wireless link between access points. Around 27% of consumers name a wired connection at their desk as their top priority.
Installation without running a new Ethernet cable For wireless mesh, find a position where the extra access point still has a good connection; test powerline in the wall sockets you intend to use. If I can’t run an Ethernet cable, I want a way to connect to my workspace without running new cables. Around 27% of consumers name installation without a new Ethernet cable as their top priority.
Connection to your broadband router Decide whether you’ll keep your broadband router, and check access point options, provider settings and firmware support. If I want to keep my broadband set-up simple, I want to know how an extra system connects to it and who manages the network. Around 13% of consumers name connection and management as their top priority.

Common pitfalls

  • Assuming the highest Wi-Fi speed guarantees coverage behind a wall

    Walls can weaken the signal; a quoted speed doesn’t tell you how strong the connection will be at your desk.

    First, assess your router’s position and the connection in your workspace. Then compare options for extending coverage.

  • Putting a wireless mesh point in the dead spot

    The extra point still needs a usable connection to the main network.

    Try a midway position. If thick walls also weaken the connection there, consider Ethernet or test powerline.

  • Expecting powerline to be a guaranteed replacement for Ethernet

    Performance over your home’s electrical wiring can vary between sockets and may be affected by connected electrical appliances.

    Test the adapters in the wall sockets you intend to use, preferably plugged directly into a socket rather than an extension lead.

  • Assuming similar mesh kits are exactly the same

    The hardware version, number of access points and power supply can all affect installation and connectivity.

    Before choosing a product, compare the full model number, version, kit size, power supply and ports.

Brands worth comparing

TP-Link

Deco models offer different ways to connect: optional Ethernet backhaul with the Deco X50, G.hn powerline alongside Wi-Fi with the Deco PX50, and PoE support with the Deco X50-PoE.

  • TP-Link describes a wired connection between Deco units as an option when you have Ethernet cables or thick walls are weakening the Wi-Fi signal.
  • With powerline, the actual connection depends on your home’s electrical wiring. For the X50-PoE, check the hardware version and whether the required power supply is available.

ASUS

ASUS says the ZenWiFi XD5 can use either a wireless or wired connection between access points.

  • Ethernet backhaul is an option if you have Ethernet ports or cabling to your access points.
  • A wired connection requires suitable ports. A quoted Wi-Fi speed doesn’t measure the signal behind the walls in your home.

devolo

According to devolo, the Magic 2 WiFi 6 next Starter Kit combines Wi-Fi with a connection over your electrical wiring.

  • devolo says the starter kit includes two adapters, and the Wi-Fi adapter has two Gigabit LAN ports.
  • devolo warns that some sockets and electrical appliances can affect powerline performance. Test the intended position in your home.

Products for this Wi-Fi set-up

This selection includes mesh systems with Ethernet backhaul, wireless mesh and a powerline Wi-Fi extender. The Dutch Authority for Digital Infrastructure (RDI) says radio equipment must meet the applicable European requirements and carry the correct CE marking; check this for the exact version.

TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

An option if you want two mesh points and a wired connection between Deco units.

The product description mentions Ethernet backhaul; the product title specifies Wi-Fi 6 and a 2-pack.

Joybuy
TP-Link Deco X50, 3-pack, dual-band 2.4 GHz and 5 GHz, Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band 2.4 GHz and 5 GHz, Wi-Fi 6

An option if you want several mesh points and can use Ethernet backhaul.

The title specifies a 3-pack and Wi-Fi 6. The product description lists three Gigabit Ethernet ports per unit; TP-Link describes optional Ethernet backhaul for the Deco X50.

Joybuy
TP-Link Deco X50-PoE, 2-pack, dual-band 2.4 GHz and 5 GHz, Wi-Fi 6

TP-Link Deco X50-PoE, 2-pack, dual-band 2.4 GHz and 5 GHz, Wi-Fi 6

An option if you want to install a mesh point with PoE and have the required power supply.

The product description mentions PoE support and two Ethernet ports per unit. Check the exact hardware version and power supply.

Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 6E

An option if you’re considering a three-point wireless mesh system and can position an extra point where it still gets a signal.

The title specifies tri-band at 2.4, 5 and 6 GHz, Wi-Fi 6E and a 3-pack. The product description lists three Ethernet ports per unit.

Joybuy
TP-Link TL-WPA7517 KIT powerline Wi-Fi starter kit

TP-Link TL-WPA7517 KIT powerline Wi-Fi starter kit

An option if you want to extend Wi-Fi over your existing electrical wiring instead of running a new Ethernet cable.

The product description mentions powerline with Wi-Fi. Performance can vary depending on your wiring and sockets, so test the sockets you plan to use.

Joybuy

Frequently asked questions

Do I need to replace my internet provider’s router?

Not necessarily: you can first improve its position or extend your Wi-Fi while keeping your provider’s router. ACM ConsuWijzer explains that you have the freedom to choose your router in the Netherlands; check the relevant security requirements and provider settings if you connect your own device directly.

Where should I put an extra wireless access point?

Place it somewhere it still has a usable connection to the main router, rather than in the dead spot itself. If the walls weaken the connection there too, look into Ethernet backhaul or test powerline.

Does powerline need extra equipment?

Yes, powerline uses adapters by your router and in your workspace. devolo says the Magic 2 WiFi 6 next Starter Kit includes two adapters; check which adapters and Wi-Fi features come with the kit you choose.

How do I maintain my own router?

Install firmware updates when they become available. ACM ConsuWijzer says updating is important for the security of your network and personal data.

What should I check about the CE marking?

Check that the exact version carries the correct CE marking and meets the applicable European requirements. The Dutch Authority for Digital Infrastructure describes these requirements for radio equipment.