Who should consider this choice?

Video caller in a room at the back of the house

You regularly use your hobby room for calls and want to find out whether the weak link is the Wi-Fi there or your internet connection. The Consumentenbond recommends investigating the cause before upgrading to a more expensive broadband package.

Household with simultaneous calls

People make calls from several rooms at the same time. The Consumentenbond points out that upload speed matters for video calls, so don’t just look at the advertised Wi-Fi speed.

Home with no route for a cable

You can’t run an Ethernet cable to your hobby room, so you need to find a spot where a wireless Wi-Fi point can still maintain a good connection to the rest of your network. The Consumentenbond suggests a wired connection as an alternative if installing a cable is possible.

What should you look for?

Move or adjust your existing equipment

Choose this if: your modem router is poorly positioned and you haven’t established that you need extra equipment.

The trade-off: changing the setup could save you from buying anything, but it may not be enough if distance or walls block the signal to the room.

Access point or mesh node connected by cable

Choose this if: you can run a cable to your hobby room and want to connect a Wi-Fi point there.

The trade-off: the connection between Wi-Fi points won’t need to rely on a wireless link, but installing a cable requires some work.

Wireless mesh with multiple nodes

Choose this if: running a cable isn’t practical and there’s a spot where an extra node can still get a good signal.

The trade-off: you avoid installing a cable, but the connection between the nodes still depends on their placement and the layout of your home.

Replace only the router

Choose this if: you’ve established that your current router isn’t up to the job and that a better position or settings could extend the signal to your hobby room.

The trade-off: replacing one device won’t automatically fix a weak wireless connection to a room at the far end of the house.

What to consider What to look for when buying Who is this most relevant to?
Stable Wi-Fi in your hobby room Compare the connection near your modem with the one where you work, and check whether you can run a cable to an access point or mesh node. The Consumentenbond explains that a cable can avoid a wireless link between Wi-Fi points. When I make calls from my hobby room, I want the connection to stay reliable. Around 36% of consumers put coverage in that room at the top of their buying priorities.
Simultaneous video calls Check your upload speed and assess the connection with several calls happening at once. The Consumentenbond stresses that upload speed matters for video calls. When several people are on calls at the same time, I want to know whether my internet connection can handle it. Around 29% of consumers give simultaneous calls their highest buying priority.
Positioning without a cable Find a spot where a wireless node can still get a good connection to your existing network. The room with the weakest signal isn’t necessarily the right place for the node. If I can’t run a cable, I want to find a spot where an extra Wi-Fi point can still maintain a good connection to the rest of the network. Around 21% of consumers prioritise avoiding cable installation.
Cost and maintenance First see whether repositioning your existing equipment helps. If you’re buying extra equipment, check that its access point mode works with your current router and remember to factor in updates. If I want to avoid extra equipment, I’d rather start with what I already have and consider the setup and updates involved. Around 14% of consumers put low purchase and maintenance costs at the top of their buying priorities.

Common buying mistakes

  • Upgrading your broadband package before checking your Wi-Fi

    Slow internet could be down to your provider, but it could also be caused by where your modem is positioned or by your home network. A faster broadband package won’t automatically fix a weak connection in a room at the far end of the house.

    Compare the connection near your modem with the one where you make calls, and improve your setup first if necessary.

  • Putting a wireless node in the spot with the weakest signal

    The node needs to maintain a usable connection to the rest of your network. In a spot with barely any reception, it may not be able to do that.

    Check the signal in a possible midway location and compare it with a wired connection if you can run a cable.

  • Treating the maximum speed on the box as a guarantee

    Advertised speeds are product specifications, not a measurement of Wi-Fi in your hobby room. The Consumentenbond points out that the range can vary between mesh systems.

    Check the connection where you make video calls, and assess the available upload speed too.

Brands to consider

TP-Link

The Deco X50 range is worth considering if you’re looking for a mesh set with several nodes you can position around your home. The manufacturer offers versions with one, two or three units.

  • TP-Link Netherlands lists three gigabit ports and dual-band Wi-Fi 6 for the Deco X50.
  • Advertised maximum wireless speed and coverage are manufacturer claims, not a guarantee of reception in your hobby room. Check the number of units and the specific version.

FRITZ!

The FRITZ!Repeater 3000 AX can extend an existing network and, according to FRITZ!, can connect to a router from another brand via LAN in access point mode.

  • FRITZ! documents two gigabit LAN ports and setup as a wired access point.
  • The repeater isn’t a standalone modem router. The manufacturer describes its integrated mesh functionality specifically for use with a FRITZ!Box.

ASUS

The ZenWiFi XD5 is a mesh option that lets you compare router, node and access point modes.

  • The ASUS specification for model XD5 (W-3-PK) lists dual-band Wi-Fi 6 and two gigabit ports per unit.
  • This specification comes from a US product page. Before buying, check the version and ports of the model on offer.

NETGEAR

The Orbi RBK763 series is a mesh option where the wireless connection between the router and satellites is part of the product design.

  • NETGEAR describes the RBK763 series as having a dedicated wireless backhaul.
  • This is a model specification, not an independently measured benefit in Dutch hobby rooms. Check the exact set and whether a wired backhaul is possible.

Products for this situation

This selection includes mesh sets for Wi-Fi across several rooms and access points that you can connect by cable. Check that the connection and installation method suit your home, and that the specific version on offer carries the required CE marking, as stipulated by the Dutch Authority for Digital Infrastructure.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A mesh set with two units for extending Wi-Fi across several rooms. The product description mentions both wired and wireless backhaul.

Tri-band Wi-Fi. The product description lists WAN/LAN ports of 10 Gbps, 2.5 Gbps and 1 Gbps per unit.

Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

Three mesh units can be positioned around your home. The product description mentions optional Ethernet backhaul.

Wi-Fi 6 and three gigabit ports per Deco unit, according to the product description.

Joybuy
TP-Link Omada EAP653 access point

TP-Link Omada EAP653 access point

An access point for a wired connection to an extra Wi-Fi point, if you can run a cable to the spot you want to cover.

The product description lists Wi-Fi 6, one gigabit Ethernet port and PoE support. Ceiling or wall mounting is also mentioned, so make sure the power supply and wired installation are suitable.

Joybuy
TP-Link Deco XE75 Pro (3-pack)

TP-Link Deco XE75 Pro (3-pack)

A mesh set with three units for placing Wi-Fi points in several areas of your home.

Tri-band Wi-Fi 6E and three gigabit Ethernet ports per node, according to the product description.

Joybuy
TP-Link Deco X50-PoE (3-pack)

TP-Link Deco X50-PoE (3-pack)

A mesh set with three units for coverage in different areas. The product description mentions PoE support.

Wi-Fi 6 and two Ethernet ports per unit, according to the product description. Make sure the power supply and wired installation are compatible with PoE.

Joybuy

Frequently asked questions

Should I replace my provider’s modem for better Wi-Fi in my hobby room?

Not necessarily. First try improving its position or settings, and see whether an extra access point would be a better fit. According to ACM ConsuWijzer, you can generally choose your own router in the Netherlands. Devices connected directly to your provider’s network must meet connection and safety requirements.

Where should I place a wireless mesh node?

Put the node somewhere it can still get a good connection to your existing network, then check reception in your hobby room. If you can run a cable, you could consider wired backhaul, which avoids a wireless link between Wi-Fi points.

Are high AX speeds enough to guarantee stable video calls?

No. An advertised wireless speed doesn’t prove that calls will be stable in your hobby room. Check the connection where you’ll be using it and the available upload speed too; the Consumentenbond points out that upload speed matters for video calls.

Do I need to keep updating my network equipment?

Yes, keep your network devices up to date. ACM ConsuWijzer says updates are important for protecting your network and personal data.

Do I need a licence for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi doesn’t require a licence if you use the designated frequencies and follow the conditions of use. The Authority also states that equipment must carry the required CE marking, so check this on the specific version on offer.