Which solution is right for you?

If you can run a cable to the back room

You want a reliable Wi-Fi connection or a wired connection for your equipment in the hobby room. TP-Link describes Ethernet backhaul for Deco systems.

If you don’t have a cable route

You don’t want to run an Ethernet cable, and are comparing a wireless point in a spot with signal coverage against a connection over your home’s electrical wiring. The Consumers’ Association recommends placing Wi-Fi extenders where you want to extend the signal.

If you want to keep your existing modem router

Your modem router works well otherwise, and you’re mainly looking for an extension that works with it. TP-Link describes an access point mode for Deco, in which some router features are unavailable.

What should you consider when choosing?

A wired access point

Choose this if: there’s already an Ethernet socket, or you can run a cable to the hobby room.

Bear in mind: the cable route and the connection method required for router or access point mode.

Wireless mesh

Choose this if: running a cable isn’t practical and there’s a spot in between that still gets a usable signal.

Bear in mind: the connection between the points will still depend on their placement and any obstacles in the way.

Wi-Fi over your home’s electrical wiring

Consider this if: you can’t run a cable and a wireless connection between points proves difficult.

Bear in mind: test the connection on your home’s electrical wiring and check compatibility before expanding a set.

Replacing just the main router

Consider this if: Wi-Fi is also poor close to your current router, or it lacks features you need.

Bear in mind: a new router won’t automatically improve the signal path through thick walls to the hobby room.

What to consider What to check before buying Who is this important for?
Connection to the back room Check whether you can run a cable and whether the chosen point supports Ethernet backhaul and the right connection mode. If I can run an Ethernet cable to the hobby room, I want a stable connection there and, if needed, a wired connection for my equipment. Around 36% of consumers prioritise the reliability of a wired connection.
Extending Wi-Fi without a cable Test whether a possible halfway point still gets a usable signal; don’t place a wireless point where the signal has already dropped out. If I don’t want to run a cable, I’m looking for a spot where a wireless mesh point can still connect. Around 29% of consumers prioritise a wireless extension that can be placed where needed.
Connection over your home’s electrical wiring Check that the set provides Wi-Fi in the hobby room, and test the connection between the sockets you plan to use. If I can’t run an Ethernet cable, I want to be able to try using the existing electrical wiring as a route. Around 21% of consumers prefer this kind of connection that doesn’t require a new cable.
Connection and day-to-day use Check which features remain available in access point mode and how many Wi-Fi points your setup needs. Once the connection is working, I want to keep my modem router and manage the network easily. Simplicity and manageable running costs matter most to around 14% of consumers.

Common buying mistakes

  • Buying a more powerful main router and nothing else

    The thick walls will still be between the router and the hobby room. The Dutch Authority for Digital Infrastructure also points out that 5 GHz has a shorter range than 2.4 GHz.

    First, work out where an extra point could go and how it will connect to your main network.

  • Placing a wireless mesh point where there’s barely any signal

    The extra point also needs to connect to your existing network. Placing it where the signal has already dropped out won’t solve the problem.

    Try a halfway location. If that doesn’t work, look into running a cable or test a connection over your home’s electrical wiring.

  • Assuming advertised Wi-Fi or powerline speeds reflect what you’ll get at home

    Published product specifications can’t predict how the connection will perform in your hobby room. Placement, walls and your existing wiring all play a part.

    Compare the right set and connection route, then assess the connection in the places where you need Wi-Fi.

Brands to consider

TP-Link

The Deco X50 offers Wi-Fi 6 mesh with optional Ethernet backhaul; the Deco PX10 combines Wi-Fi 6 mesh with powerline.

  • TP-Link lists three gigabit ports on each Deco X50 unit, and says PX10 units connect over both Wi-Fi and your home’s electrical wiring.
  • The advertised speeds can’t predict the results behind the walls in your home. Some router features are unavailable in Deco access point mode.

ASUS

The ZenWiFi XD5 is a mesh option if you have, or can run, Ethernet between locations.

  • ASUS lists Ethernet backhaul and app-based management for the XD5.
  • Check how many units are included in your chosen set: a single unit and a three-pack are different configurations.

devolo

According to the manufacturer, the Magic 2 WiFi 6 next Starter Kit uses your existing electrical wiring to bring Wi-Fi to a room further away.

  • devolo lists two gigabit ports on the Wi-Fi adapter; according to the manufacturer, the Starter Kit includes two adapters.
  • The advertised speed isn’t a measurement of your home’s electrical wiring. Check compatibility across the product range if you plan to add more units later.

FRITZ!

The FRITZ!Repeater 1200 AX is a compact way to extend your network, particularly if you have an existing FRITZ!Box. It can also connect via LAN.

  • According to the manufacturer, this model has one gigabit LAN port.
  • If you use that port to connect to the router, there’s no second port left on the repeater for your hobby equipment. Mesh features may not work in the same way with a router from another brand.

Joybuy products for this situation

This selection includes powerline Wi-Fi, mesh systems and access points for a wired connection to the hobby room.

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

TP-LINK TL-WPA7517 KIT Starter Kit

A powerline Wi-Fi extender to consider if you want to use your existing electrical wiring as the connection route.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A two-unit mesh set to consider if you want to place an extra point closer to the hobby room.

The product description lists Wi-Fi 6 and optional Ethernet backhaul between the Deco units. Performance behind your walls will depend on placement and the connection between the points.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

An access point to consider if you have an Ethernet cable running to the hobby room and want a Wi-Fi point connected by cable.

The product details list Wi-Fi 6, one gigabit Ethernet port and PoE+. You’ll need a suitable PoE+ or DC power supply for installation.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack, Wi-Fi 6

TP-Link Deco X50 (2-pack)

A two-unit mesh set to consider if you want to add an extra Wi-Fi point and may be able to connect the units with a cable.

The product details list dual-band Wi-Fi 6 and optional Ethernet backhaul. According to the product details, each unit has three gigabit Ethernet ports.

View at Joybuy
TP-Link Omada EAP613 wireless access point

TP-Link Omada EAP613

An access point to consider if you have a wired connection to the hobby room and want to mount a Wi-Fi point there.

The product details list Wi-Fi 6, Ethernet, mesh functionality and wall or ceiling mounting. Power over PoE or DC is listed.

View at Joybuy

Frequently asked questions

Do I need to replace my existing modem router?

Not necessarily. If the problem is mainly in the hobby room, first compare options for adding a Wi-Fi point closer to it. With Deco, access point mode lets your existing router manage the network, but check which Deco features aren’t available in this mode.

How do I connect two Deco points with a cable?

TP-Link recommends setting up the Deco units in the app first, then connecting the cable. The permitted cable route varies depending on router or access point mode; check in the app that Ethernet backhaul is active.

Does my Wi-Fi extender need maintenance?

Check for firmware updates and change the default login details where applicable. This security advice doesn’t indicate how long a particular model will receive updates, so check the information for your chosen model.

What should I check when buying a Wi-Fi product in the Netherlands?

Check for the CE marking and the product information for the version you’ve chosen. The Dutch Authority for Digital Infrastructure outlines the applicable requirements for radio equipment and the RED 3.3 digital security requirements in force since 1 August 2025. A shop listing on its own doesn’t confirm that an individual product supplied meets those requirements.