Who is this choice for?

People with a weak signal at the back of the house

You can connect to your existing router, but the signal in the hobby room is too weak. Find a spot where an extra Wi-Fi node can still make a usable connection to the router. The Consumentenbond recommends placing it closer to the middle of the house if the Wi-Fi signal is weak at the back.

Groups who are online at the same time

If several people use laptops, phones or other devices in the hobby room, signal strength isn’t the only thing that matters: the connection between the extra node and the router is important too. Also check that its Wi-Fi features are compatible with the devices you use.

People who can’t run an Ethernet cable

If you want a connection to a room at the back of the house without running a new network cable, you could consider a wireless node in a suitable in-between spot or powerline through your existing electrical wiring. Devolo describes powerline as a connection over that wiring; how well it works depends on the sockets you plan to use.

What should you look for when setting up Wi-Fi in a hobby room?

Start by checking the connection between the router and the hobby room. Then consider capacity for simultaneous use, compatibility and the setup as a whole.

What to consider What should you check? Who is this important for?
Connection to the hobby room Check whether Ethernet backhaul is possible. If not, find an in-between spot where the extra Wi-Fi node can still get a good signal from the router, then test the connection in the hobby room. If I need a reliable connection mainly in the room at the back of the house, I want to know whether the extra node itself can communicate properly with the router. Around 36% of consumers put the connection to the room first.
Simultaneous use Check which Wi-Fi standards are supported by the router, the extra node and the devices you use. Assess the connection when several people are online at the same time. When we’re online in the hobby room at the same time, I want the setup to suit our devices; seeing a Wi-Fi connection doesn’t tell me how well it performs in practice. Around 29% of consumers prioritise capacity for simultaneous use.
Router and existing equipment Make a note of the router model and check its supported connection mode, any requirements for mesh features, LAN ports and power supply. If I want to keep using my current router and devices, I want to know in advance which features will work with that setup. Around 21% of consumers put compatibility first.
Complete setup Include any Wi-Fi nodes, PoE power supply and cable installation you may need when making your choice. Also check the available firmware support and your rights in relation to the retailer. When weighing up the total purchase and installation costs, I want to know which components the chosen solution needs. Around 14% of consumers prioritise the cost of the complete setup.

Common pitfalls when extending your Wi-Fi

  • Putting a repeater straight in the hobby room with poor reception

    The extra node still needs to connect to your existing network. If the router’s signal is already weak where you place it, the repeater may also struggle to maintain a connection.

    First, try an in-between spot with fewer obstacles. If the connection is still inadequate, consider a wired node.

  • Mistaking an access point for a complete modem-router

    An access point such as the Ubiquiti U6+ is designed to add Wi-Fi to a network; it doesn’t automatically replace your modem-router. The manufacturer specifies a gigabit network port and PoE power for the U6+.

    Before buying, check how the access point will receive data and power, and which router and Ethernet connection will remain part of the setup.

  • Assuming the stated maximum powerline speed is what you’ll get in the hobby room

    Powerline works through your existing electrical wiring. The connection through the sockets you choose may therefore differ from what the stated maximum speed suggests.

    Test a suitable kit using the sockets you actually plan to use, and assess how it performs when several people are online at once.

  • Assuming standard repeater operation is the same as integrated mesh compatibility

    A repeater working with another router doesn’t automatically mean that all the features of your own mesh system will be available. FRITZ! makes this distinction for the FRITZ!Repeater 1200 AX.

    Check the requirements for the mesh features you want separately from the basic connection.

Brands to consider for extending your Wi-Fi

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system for anyone looking to add multiple Wi-Fi nodes.

  • TP-Link says the Deco X50 can use Ethernet backhaul. The official model specifications list three gigabit ports per node.
  • Check the pack size and model variant; the specifications alone don’t tell you what the range or speed will be in your hobby room.

FRITZ!

The FRITZ!Repeater 1200 AX extends an existing network and is particularly relevant if you already use a FRITZ!Box.

  • FRITZ! says this model has a gigabit LAN port and can be connected to a FRITZ!Box via LAN.
  • FRITZ! also says it can be used with other routers, but that doesn’t mean FRITZ! mesh features will be available with every router.

devolo

Magic 2 WiFi 6 next combines Wi-Fi in the receiving room with a connection through your existing electrical wiring.

  • According to devolo, the starter kit includes two adapters and the Wi-Fi adapter has two gigabit ports.
  • Performance depends on the sockets and electrical wiring. Devolo says Magic and dLAN products don’t form a single powerline network together.

Ubiquiti

The UniFi U6+ is a wired Wi-Fi 6 access point for anyone who can run Ethernet to the hobby room and wants to manage the access point separately.

  • Ubiquiti specifies a gigabit network port and PoE power for this model.
  • It’s an access point, not a complete replacement for a modem-router. Check what power supply and setup are required.

Joybuy products for Wi-Fi in a hobby room

This selection includes mesh Wi-Fi, wired access points and powerline products for connecting to a hobby room at the back of the house. For Wi-Fi equipment placed on the market in the Netherlands, the Rijksinspectie Digitale Infrastructuur requires the relevant CE marking to be displayed on the device. Check the marking on the item actually delivered.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A mesh kit with two units for extending Wi-Fi to multiple rooms.

The product description lists Wi-Fi 7, tri-band and multi-link operation.

Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point

TP-Link Omada EAP653 Wi-Fi 6 access point

A wired access point for a setup with Ethernet running to the hobby room.

The product description lists dual-band Wi-Fi 6, one gigabit Ethernet port and PoE support. Check how the access point will receive data and power in your setup.

Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E

TP-Link Deco XE75 tri-band Wi-Fi 6E

A mesh system for extending Wi-Fi to multiple areas of your home.

The product name lists tri-band 2.4 GHz, 5 GHz and 6 GHz, and Wi-Fi 6E (802.11ax).

Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6, 2-pack

TP-Link Deco X50 dual-band Wi-Fi 6, 2-pack

A mesh kit with two units for adding an extra Wi-Fi node to your home.

The product description lists Wi-Fi 6, dual-band 2.4 GHz and 5 GHz, and three gigabit ports per unit. TP-Link says the Deco X50 can use Ethernet backhaul.

Joybuy
TP-Link TL-WPA7517 powerline adapter starter kit

TP-Link TL-WPA7517 powerline adapter starter kit

An alternative to running a new Ethernet cable, if the connection through your existing electrical wiring is suitable.

The product description lists Wi-Fi 5 and Wi-Fi extension via powerline. Test the connection using the sockets you actually plan to use.

Joybuy

Frequently asked questions about Wi-Fi in a hobby room

Do I need to replace the router if the Wi-Fi is only poor in the hobby room?

Not necessarily. Compare the connection near the router with the one in the hobby room, and first consider the placement or adding another Wi-Fi node. A new device in the same unsuitable spot won’t guarantee better coverage at the back of the house.

Where should I place a wireless repeater or mesh node?

Don’t place the extra node where the original signal has almost disappeared. If the signal is weak at the back of the house, the Consumentenbond recommends a spot closer to the middle of the house, with as few obstacles as possible between the nodes. Then check the connection in the hobby room.

Will every user get the stated Wi-Fi speed?

No. The stated Wi-Fi speed alone doesn’t tell you how well the complete connection will perform in your room. The position of the nodes, obstacles, the Wi-Fi features supported by your devices and the connection to the router all play a part.

Who should I contact if a Wi-Fi device I’ve bought doesn’t meet expectations?

According to the Rijksoverheid, the retailer must provide a solution if there’s a problem with a product; you don’t have to rely solely on the manufacturer. A manufacturer’s warranty doesn’t replace your legal rights in relation to the retailer.

What product requirement should I check for a Wi-Fi router or access point?

The Rijksinspectie Digitale Infrastructuur states that Wi-Fi equipment must display the required CE marking. Check the device actually delivered; a mention on a retailer’s product page doesn’t confirm that your item has the marking. When using it, make sure you also select the correct country settings for the Netherlands.