Who is this solution for?

Viewer with poor signal at the back of the house

Your screens are in a hobby room where the Wi-Fi signal from your existing router is weak. A reliable connection to that room matters more to you than a higher speed on the box. The Consumers’ Association (Consumentenbond) recommends placing a booster where the signal needs to be improved.

Household streaming on several screens at once

You use several screens at the same time and want to assess the connection on each one. A local Wi-Fi point or wired connections could be useful. The Consumers’ Association explains how to test Wi-Fi with multiple devices, while Netflix gives separate speed recommendations for its streams.

Buyer who wants to keep their provider’s router

You want to extend your network without replacing your existing modem or router. So check for access point mode, ease of installation and connectivity. The ACM ConsuWijzer explains your freedom to choose a router, along with the conditions that may apply when connecting to your provider’s network.

What should you look for?

First, measure the connection where your screens are, then see whether you can run a cable. If that’s not possible, the position of a wireless point is key. If the other rooms work well, you may be able to extend your network while keeping your existing router.

Factor to consider What should you check? Who is this important for?
Coverage in the room at the back Measure the connection in the hobby room and in potential spots for an intermediate point; check whether Ethernet backhaul is possible. If there’s little signal in the hobby room at the back, my main concern is whether I can get a usable connection there. Around 36% of consumers say coverage in the room at the back is their primary reason for buying.
Several streams at once Test the speed on the screens while they’re all in use and check their resolutions and connection options. When several screens are streaming at once, I want to know whether each one gets a strong enough connection. Around 29% of consumers prioritise simultaneous streams.
Cabling and connections Check whether you can run a cable, whether the system supports Ethernet backhaul and how many ports will remain available after connection. If I’d rather use a wired connection between rooms or to my screens, I look at the cable route and available connections. Around 21% of consumers say a stable wired connection is their primary reason for buying.
Keeping your existing router Check for access point mode, how the system connects to your router and how many units you need for the hobby room. If I want to keep my provider’s router, I look for an add-on that works with it, without paying for extra coverage I don’t need. Around 14% of consumers prioritise keeping their existing equipment.

Buying pitfalls

  • Looking only at the advertised Wi-Fi speed

    The Wi-Fi version alone doesn’t determine performance. Positioning, the connection between points and the speed on your screens all play a part.

    First, measure the connection where you’ll use it. Then compare where the points can go and how they connect to one another, rather than looking only at the AX or BE number.

  • Placing a wireless mesh point right at the back without testing its reception

    The point itself needs a strong enough connection to pass the signal on.

    Try a spot in between instead. If the route is tricky, consider a wired connection.

  • Assuming the set size or regional version from the product name

    A two-point set and a three-point set don’t contain the same number of units. What’s included in the pack can also vary by region.

    Before buying, check the exact number of units, the version, the ports and the included power supply.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available in two- or three-point sets, with optional Ethernet backhaul.

  • According to TP-Link Netherlands, each Deco X50 unit has three gigabit ports and an access point mode.
  • Advertised speeds and coverage areas are manufacturer claims, not measured performance in your home. Check which set size is right for your hobby room.

FRITZ!

The three-point FRITZ!Mesh Set 1700 is an option if you need coverage in several rooms and want to keep your existing router.

  • FRITZ! describes the set as three Repeaters 1700 that can be used with different routers.
  • Three points may be more than you need for a single room at the back. The advertised Wi-Fi speed doesn’t guarantee a particular speed where you use it.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range to consider if you’re also looking at 2.5-gigabit connections.

  • ASUS lists two 2.5G ports and an access point mode for the BD4.
  • ASUS warns that what’s included in the pack can vary by region. Check the exact Dutch version; Wi-Fi 7 isn’t automatically the right choice for everyday use.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to replace my provider’s modem to get better coverage in the hobby room?

Not necessarily. First, check the coverage and positioning. An extra Wi-Fi point or a wired access point could serve the hobby room while you keep your existing router. The ACM confirms your freedom to choose a router, but connection and security requirements may apply to a device you connect directly to your provider’s network.

Where should I place an extra wireless Wi-Fi point?

Don’t automatically put it in the room with the weakest signal. For poor coverage at the back of the house, the Consumers’ Association recommends placing it nearer the middle of the house, with as few obstacles as possible between the points. Then check the connection in the hobby room.

How can I tell whether several screens are getting enough speed?

Measure the connection on the screens, ideally while they’re all in use. For its own 4K streams, Netflix recommends a stable connection of at least 15 Mbps per stream. This isn’t a universal requirement for every streaming service, and it doesn’t guarantee uninterrupted playback.

What if the router doesn’t work properly after I buy it?

According to ACM ConsuWijzer, you have a statutory guarantee as well as any manufacturer’s guarantee. If a product breaks sooner than you could reasonably expect under normal use, the seller must offer an appropriate solution. In the Netherlands, the statutory guarantee isn’t automatically limited to two years.

Which safety rules apply when buying in the Netherlands?

According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), a Wi-Fi router must carry the correct CE marking, and sellers may only trade in equipment that meets the requirements. Check the marking on the product you receive; a mention on a retailer’s website doesn’t confirm which marking is on the actual item.