Who is this relevant for?

A hobby room with weak Wi-Fi

Your connection works nearer the router, but isn’t good enough at the back of the house. First, map out where the signal drops out, then decide whether you need extra coverage. Ziggo and KPN offer advice on connection and coverage problems at home.

A household with busy evenings

You use the hobby room while others are video calling, streaming or using other devices. So, don’t just look at the advertised top speed: check the connection where you work, too. Consumentenbond covers Wi-Fi standards and performance, while Ziggo discusses wired connections.

If you can run a cable

You can run a network cable to the hobby room and want to weigh up whether installing a wired access point or mesh node is worthwhile. Ziggo and TP-Link provide information about wired connection options.

What should you consider when choosing?

First, compare the connection by the router, between the rooms and in the hobby room. If possible, check it during a busy evening, too. This will help you work out whether you mainly need better coverage, a cable route or a different connection to your existing network.

What to consider What should you look for? Who is this important for?
Coverage in the hobby room Compare the connection in different places and check where you could position an additional Wi-Fi point. I want a usable connection at the back of the house, even if Wi-Fi works well by the router. Around 36% of consumers in this situation say coverage is their main concern when buying.
Several people online in the evening Test the connection in the hobby room during a typically busy evening. I want to use the hobby room while others are online, too, without relying solely on a theoretical speed. Around 29% of consumers give simultaneous use top priority.
Wired connection Check whether you can run a cable to an access point or mesh node, and whether the connections suit your setup. I want to connect devices in the hobby room by cable or run one to a Wi-Fi point. Around 21% of consumers put a wired connection first.
Connection and ongoing costs Check the operating mode, how it connects to your existing equipment and whether extra features require a subscription. I want to know how a new point connects to my existing network and whether any features will incur additional costs. Around 14% of consumers prioritise easy installation and predictable costs.

Check your existing router first

A good fit if: you’re not yet sure where the connection drops out, or your existing setup might be enough.

The trade-off: you’ll need to test in several places and at different times. Changing the router’s position won’t always overcome distance or obstructions.

Wired access point or mesh node

A good fit if: you can run a cable to the hobby room or somewhere closer to it.

The trade-off: you’ll need a cable route and a suitable connection.

Wireless mesh system

A good fit if: running a cable isn’t practical, but you can place an extra node somewhere with a good connection.

The trade-off: placement and building materials affect the connection; the stated range doesn’t guarantee coverage in your hobby room.

A new router

A good fit if: your tests suggest the current router is the limiting factor and the hobby room is within the usable range of a single device.

The trade-off: a newer generation of Wi-Fi doesn’t prove that the signal will pass through walls more effectively; you may still need an extra point.

Wi-Fi points from your provider

A good fit if: compatibility with your provider’s existing equipment and support from that provider are important to you.

The trade-off: check modem compatibility, connection method and the terms for buying or renting.

Common mistakes

  • Taking advertised range as a guarantee

    Real-world coverage and throughput depend on factors including building materials, obstacles, network traffic and the devices you use.

    Check the connection where you need it and see whether you can position an extra point between the router and the hobby room.

    You may still need an extra point or a cable.

  • Assuming every mesh main unit works wirelessly with your router

    According to TP-Link, a Deco main unit can’t connect to an existing router as a wireless repeater, so the connection method and operating mode matter.

    Before you buy, check the network topology and whether access point mode will work with your existing network.

    You may need to run a cable or adjust your setup.

  • Assuming all extra security features are included

    TP-Link distinguishes between basic features and paid HomeShield add-ons.

    Check which features you need and what subscription terms apply to the model you choose.

    Some additional features may require a recurring subscription.

Brands to consider

TP-Link

TP-Link describes the Deco X50 as a Wi-Fi 6 mesh option with three gigabit ports per unit and support for Ethernet backhaul.

  • TP-Link describes both wireless and wired connections between Deco points.
  • According to TP-Link, the main unit can’t connect wirelessly to an existing router as a repeater. Some HomeShield features require a subscription.

ASUS

According to ASUS, ZenWiFi BD4 combines dual-band Wi-Fi 7 with AiMesh and two 2.5-gigabit ports.

  • ASUS lists wired backhaul as an option.
  • Wi-Fi 7 and the stated coverage don’t show how well the connection will work in your home. Check the number of units in the set and compatibility.

FRITZ!

FRITZ! describes the FRITZ!Mesh Set 1700 as an expandable set that can connect to an existing router or modem.

  • FRITZ! lists features including automatic updates and guest access.
  • Check the number of units and the connection method: a version with two points isn’t the same as a set with three.

KPN

KPN points offer a provider-specific way to extend coverage for households that want to keep their KPN setup.

  • KPN describes both wireless and wired placement options.
  • Check your modem type and the relevant connection, purchase or rental terms.

NETGEAR

NETGEAR describes the Orbi RBE772 as a tri-band Wi-Fi 7 mesh system with a wired backhaul option.

  • The stated features include a wired connection between the points.
  • These specifications don’t show the measured benefit in your home. Compare the connection options with a simpler or wired solution.

Wi-Fi mesh systems at Joybuy

This Joybuy selection includes mesh systems designed to extend coverage across several rooms. For each set, check the number of points, how it connects to your existing router and whether you’ll need to run a cable.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-pack

For anyone looking to extend mesh coverage across several rooms and considering a wired connection for one of the points.

Version: 2-pack.

TP-Link says the main unit can’t connect to an existing router as a wireless repeater. According to TP-Link, HomeShield real-time protection requires a Security+ subscription.

View at Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 mesh system, 2-pack

ASUS ZenWiFi BT8 2-pack

For anyone looking for a mesh system for several rooms and factoring wired devices into their choice.

Version: 2-pack, tri-band, Wi-Fi 7 (802.11be), 2.4 GHz, 5 GHz and 6 GHz.

Check the connections on the version you choose to make sure they suit your preferred wired setup.

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 3-pack

For anyone looking to use several mesh points and considering wired backhaul if a cable route is available.

Version: 3-pack, dual-band, Wi-Fi 6 (802.11ax), 2.4 GHz and 5 GHz.

According to TP-Link, the main unit can’t connect to an existing router as a wireless repeater. HomeShield real-time protection requires a Security+ subscription, according to TP-Link.

View at Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system, 3-pack

TP-Link Deco XE75 Pro 3-pack

For anyone looking to connect several rooms with mesh points and connect devices in the hobby room by cable.

Version: 3-pack, tri-band, Wi-Fi 6E (802.11ax), 2.4 GHz, 5 GHz and 6 GHz.

According to TP-Link, the main unit can’t connect to an existing router as a wireless repeater.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50-PoE 3-pack

For anyone looking to position several mesh points and considering a wired Power over Ethernet setup.

Version: 3-pack, dual-band, Wi-Fi 6 (802.11ax).

According to TP-Link, the main unit can’t connect to an existing router as a wireless repeater.

View at Joybuy

Frequently asked questions

Do you need to replace your router if only the hobby room has poor Wi-Fi?

Not necessarily. First, compare the connection by the router with the one in the hobby room, ideally during a busy evening, too. If the poor coverage is mainly in the room at the back of the house, look into an extra Wi-Fi point or a cable before choosing a new main router.

Can a Deco connect wirelessly to your existing modem-router?

According to TP-Link, a Deco main unit can’t connect to an existing router as a wireless repeater and must be connected by cable. Another Deco point can connect wirelessly within the Deco network; TP-Link lists router and access point modes.

How can you keep the connection working well after installation?

Check the placement and keep the firmware up to date. ACM ConsuWijzer points out that connected devices you own need to be kept updated to help keep the network secure.

Are all Deco security features included?

No. Some additional features require a subscription. TP-Link says HomeShield real-time protection requires a Security+ subscription; check the features and terms for the version you choose.

What should you look for in a router for the Dutch market?

The Dutch Authority for Digital Infrastructure sets out the relevant requirements for radio equipment and CE marking. Check the specific model and follow the installation and usage instructions; a general product name doesn’t prove that every individual unit meets the requirements.