Who is this choice relevant to?

Video callers with a weak signal at the back of the house

If the picture or sound drops out where you take calls, you’ll want to know whether an additional Wi-Fi access point can still receive a good signal there. The Consumers’ Association recommends placing an access point closer to the middle of the house if coverage is weak at the back.

Home workers who can run a network cable

If you can run a cable to your work area or to an access point nearby, you could consider a set-up that doesn’t rely on a wireless signal to connect the Wi-Fi access points. ASUS and TP-Link describe Ethernet backhaul for their mesh products.

Buyers who want to try the simple solution first

Want to avoid replacing equipment when the internet connection or router position could be the cause? The Consumers’ Association recommends testing the connection with a wired device and offers tips on assessing your internet connection at home.

What should you look for?

Move the router

When: If a wired test shows a good connection and you can move the router to a more central position.

Consider: If you have a provider-supplied modem, you may need to check first whether it can be moved.

Wireless Wi-Fi access point

When: If moving the router doesn’t help enough and there’s a spot halfway down the hallway where the access point can still get a good connection.

Consider: An access point at the end of the hallway may receive a weak signal itself, so it might not be able to pass the connection on reliably.

Wired access point or mesh system

When: If you can run a network cable to your work area or to an access point nearby.

Consider: You’ll need to run a cable and have a suitable connection or network configuration.

What to consider What should you check? Who is this important for?
Coverage and positioning Test the connection where you take calls and check whether there’s a spot halfway down the hallway with a power socket and good enough reception. If I want to make video calls at the end of the hallway, I need to know where an additional access point can still stay connected to the router. Around 36% of consumers prioritise coverage and positioning.
Wired connection Check whether you can run a cable and whether the model supports Ethernet backhaul or the access point set-up you want. If I can run a cable to my work area, I don’t want to rely on a weak wireless connection between access points. Around 29% of consumers prioritise a stable wired connection.
Call quality Test a video call in the intended location and measure your internet connection separately using a network cable. When I’m on a call there, I want the picture and sound to remain clear enough to use. A high advertised speed alone doesn’t tell me how well the connection will work in that spot. Around 21% of consumers prioritise call quality.
Existing equipment Check which add-ons work with your modem or router and what connections your set-up requires. I want to find out whether I can keep using my current modem or router before replacing any equipment. Around 14% of consumers prioritise making use of their existing equipment.

Common buying mistakes

  • Placing a wireless mesh access point right at the end of the hallway

    A wireless access point needs to stay connected to another point to pass traffic on. Where the Wi-Fi already drops out, that connection may be too weak.

    Check the connection as you position the access point. Try a spot closer to the middle, or use a network cable if possible.

  • Assuming a higher advertised Wi-Fi speed guarantees better video calls

    Your internet connection, distance, obstacles and reception where you take calls all play a part. A higher speed on the box says nothing about call quality in that particular spot.

    Compare a wired test with the Wi-Fi connection where you take calls, then assess the positioning or equipment.

  • Buying a mesh access point without checking it works with your existing network

    Set-up methods and compatibility with an existing router vary between systems.

    Before buying, check the full model name, the number of units, the LAN connections and which router or access point set-ups are supported. You may also need a main unit or a cable.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available with one, two or three access points.

  • TP-Link says the Deco X50 has three gigabit ports per access point and supports optional Ethernet backhaul.
  • A stated coverage area for a set doesn’t prove what range or call quality you’ll get in your hallway.

ASUS

The ZenWiFi XD5 is a mesh option for anyone looking to install several access points and potentially connect them using Ethernet.

  • ASUS describes Ethernet backhaul and management through the router app.
  • According to ASUS, some 5GHz features may vary by region. Check the specific version and don’t treat the advertised coverage as a guarantee for your home.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend an existing FRITZ! network.

  • According to FRITZ!, this model has two gigabit LAN ports and can connect to a FRITZ!Box via LAN.
  • The automatic transfer of Wi-Fi settings described applies when used with a FRITZ!Box. Check what’s possible with a different modem.

Products for Wi-Fi in a long hallway

This selection includes mesh systems for Wi-Fi in several areas of your home, as well as a wired access point for a location where you have a network cable. Before buying, check that the set-up is compatible with your existing network and that the specific version carries the correct CE marking.

TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack), Wi-Fi 6

A mesh system with three access points is a good choice for extending Wi-Fi to several areas of your home.

Dual-band: 2.4 GHz and 5 GHz. TP-Link lists three gigabit ports per access point and optional Ethernet backhaul for the Deco X50.

Joybuy
TP-Link Omada EAP653 access point

TP-Link Omada EAP653

This access point is suitable for a wired set-up when there’s a network cable available where you want to install it.

The product name lists 2976 Mbit/s and Power over Ethernet (PoE).

Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack), Wi-Fi 6E

A mesh system with three access points is designed to provide Wi-Fi in several areas of your home.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz.

Joybuy
TP-Link Deco X50-PoE mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack), Wi-Fi 6

A mesh system with three access points is suitable for a set-up that needs Wi-Fi in several areas.

Dual-band: 2.4 GHz and 5 GHz. The product name lists PoE and two Ethernet ports.

Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack), Wi-Fi 6

A mesh system with two access points is a good choice if you want to extend Wi-Fi to more than one area of your home.

Dual-band: 2.4 GHz and 5 GHz. TP-Link lists optional Ethernet backhaul for the Deco X50.

Joybuy

Frequently asked questions

Do you need to switch to a new internet plan or buy a new router straight away?

No. First, test your internet connection using a computer connected by network cable, then compare it with the Wi-Fi where you take calls. If the Wi-Fi is particularly weak at the back of the house, try moving the router to a more central position or add a suitable Wi-Fi access point.

Where should you place an additional wireless Wi-Fi access point?

Don’t automatically put it where the signal has already dropped out. If coverage is weak at the back of the house, the Consumers’ Association recommends a spot closer to the middle. Choose a position where the access point can still maintain a good connection to the other one.

What can you do if a video call temporarily starts to stutter?

If bandwidth is limited, Zoom recommends, among other things, turning off HD video. This won’t fix a poorly positioned Wi-Fi access point or a consistently weak internet connection.

Do you need a licence for home Wi-Fi in the Netherlands, and what should you check on your equipment?

According to the Dutch Authority for Digital Infrastructure (RDI), you don’t need a licence for home Wi-Fi as long as you follow the rules for the designated frequencies and their use. The RDI also states that radio equipment must carry the correct CE marking. Check the marking on the specific device and use it according to the instructions.