Uploading photos from a room with weak Wi-Fi
You’re sending a photo album from a room where the Wi-Fi is noticeably weaker than near the router. Compare the connection in both places before choosing a repeater.
First, use a cable to measure the upload connection at your router, then compare it with the connection where you send photos. A repeater won’t fix a limitation with the internet connection itself. A wireless repeater is only a sensible option if it can still receive a good signal from your router in a suitable spot in or before the hallway. If you can’t find a suitable spot but can run an Ethernet cable, consider a device with access point mode. Before buying, also check the dimensions, compatibility with your router and the CE marking on the specific device.
You’re sending a photo album from a room where the Wi-Fi is noticeably weaker than near the router. Compare the connection in both places before choosing a repeater.
You’re looking for a suitable socket along the way without blocking the passage. The signal in that spot and the device’s dimensions will help determine whether it’s practical to install there.
You can run an Ethernet cable, but there’s no suitable spot with enough signal from the router for a wireless repeater. In that case, access point mode may be worth considering.
First, measure the upload connection. Then choose between a wireless repeater, a wired access point or improving the connection at the router.
Choose this if: a socket between the router and the upload location still receives a good signal from the router.
Bear in mind: the wireless connection to the router and the space the device takes up in the hallway.
Choose this if: there’s no suitable spot for a wireless connection, but you can run a cable to a suitable location.
Bear in mind: how you run and position the cable; check that the model has access point mode.
Choose this if: a wired test at the router already gives disappointing results, or moving the router could improve coverage at the upload location.
Bear in mind: moving the router may mean longer cables or a discussion with your provider.
| What to consider | What should you look for? | Who should pay particular attention? |
|---|---|---|
| Actual upload connection | Compare a wired test at the router with the connection at the upload location; check the upload speed. | I want to know whether the internet connection itself is slowing down the upload before extending my Wi-Fi. That’s why around 36% of consumers prioritise the actual upload connection. |
| Positioning in the hallway | Test the signal at the socket you’re considering and compare the device’s dimensions and any aerials with the space available. | In a narrow hallway, I want to be able to position a repeater without blocking the passage, while still placing it somewhere it can receive a signal from the router. Around 29% of consumers put finding a clear, suitable spot first. |
| Wired connection | Check whether you can run an Ethernet cable to the chosen location and whether the model supports access point mode. | If there’s no suitable spot for a wireless connection, I want to know whether I can run Ethernet to a suitable location. Around 21% of consumers prioritise a connection that doesn’t rely on a wireless link between devices. |
| Compatibility and the overall set-up | Check your router, the mesh function you want and the hardware version and firmware; also consider whether you’ll need to run a cable. | I want to know in advance whether the feature I’ve chosen will work with my router and what extra equipment or cabling I might need. Around 14% of consumers prioritise compatibility and the overall set-up. |
The Dutch Authority for Digital Infrastructure states that radio equipment meeting the applicable requirements must carry the CE marking. Check the marking on the specific device and version before making your choice.
A slow upload could also be caused by the internet connection. A Wi-Fi-only test won’t tell you which is the problem.
First, test the connection at the router using a cable, then compare it with the connection where you upload. The Consumers’ Association recommends connecting a PC or laptop to your home network with a network cable to run a speed test.
A wireless repeater still needs to receive a signal from the router. A spot behind obstacles may therefore be unsuitable.
Try a spot in between. If you can’t get a good wireless connection there, compare it with an access point connected by Ethernet cable.
An Ethernet port doesn’t automatically mean that a device supports wired mesh backhaul. TP-Link has requirements for both devices and their firmware for EasyMesh Ethernet backhaul.
Check the exact model, hardware version and feature you want before relying on a mesh connection.
If the devices don’t support the feature you want, you may need extra equipment or cabling to set up an alternative.
In the Netherlands, statutory guarantee periods don’t have a fixed two-year limit, according to ACM ConsuWijzer. What you can reasonably expect depends, among other things, on the product.
Keep your proof of purchase and contact the retailer if a product is faulty.
According to TP-Link Netherlands, the RE605X is a Wi-Fi 6 repeater with a signal indicator, a gigabit port and access point mode.
According to FRITZ!, the FRITZ!Repeater 1200 AX is a compact Wi-Fi 6 extender with one gigabit LAN port.
According to devolo, the WiFi 6 Repeater 5400 is a desktop model that can be used wirelessly or as an access point with Ethernet.
This selection includes wireless repeaters for extending coverage from a suitable location, and access points for a wired connection to your chosen spot.
No image available
For extending Wi-Fi from a socket where the repeater can still receive a usable signal from the router.
300 Mbps according to the product name.
No image available
For extending an existing Wi-Fi network when there’s a suitable socket between the router and the room where you upload.
No image available
For a wired access point set-up if you can run Ethernet to your chosen location.
2976 Mbit/s; white; Power over Ethernet (PoE).
No image available
For a wired access point set-up if you’re considering a wall-mounted model; check that your chosen mounting location is suitable.
5012 Mbit/s; white; Power over Ethernet (PoE).
No image available
For anyone considering an access point or extender set-up; using it as an access point requires an Ethernet connection to the location.
Up to 300 Mbps; 2 aerials; WPS; Passive PoE.
Not if the internet connection itself is the limiting factor. First, compare a wired test at the router with the connection where you upload. If the wired test is already disappointing, investigate the connection from your provider.
Choose a spot between the router and the room where you upload, where the repeater can still receive a good signal from the router. Test the socket you’re considering and check that the device, including its dimensions and any aerials, won’t obstruct the passage.
No, it depends on the features of the exact model. TP-Link lists access point mode for the RE605X. For EasyMesh Ethernet backhaul, both devices must support the feature and have compatible firmware.
According to the Dutch Authority for Digital Infrastructure, radio equipment meeting the applicable requirements must carry the CE marking. Check the marking on the specific device, not just the model name.
No. According to ACM ConsuWijzer, there’s no fixed two-year limit for statutory guarantees in the Netherlands. What you can reasonably expect from a product depends, among other things, on the product itself. If a product is faulty, contact the retailer.