Who is this advice for?

Studying at the end of the hallway

First, you want to find out whether Wi-Fi drops out specifically where you usually study, and whether moving your router or adding another Wi-Fi point would help. The Consumers’ Association (Consumentenbond) recommends placing the router in a more central position and not putting a booster in an area with no coverage.

Able to run a cable to your study area

You can run Ethernet to the other end of the hallway and are looking for an access point or mesh point that can be connected there by cable. The Ubiquiti UniFi U6+ specifications list Ethernet and PoE as its connection and power requirements.

Keeping your existing router

You want to extend coverage without replacing your provider’s modem. Check that your chosen extender works with your router and which features are available. TP-Link describes an access point mode for Deco that works alongside an existing router.

What should you look for when choosing?

First, compare the connection beside the router, halfway down the hallway and where you study. The Consumers’ Association recommends moving the router to a more central position and trying a booster halfway along. Testing the connection in your home will help you decide which option is right for you.

Concern What should you check? Who is this most relevant to?
Usable Wi-Fi where you study Compare the connection beside the router, halfway down the hallway and where you study. Check where an additional point can still connect. If Wi-Fi drops out where I usually study, I want to know where the signal weakens before choosing equipment. Around 36% of consumers prioritise coverage in that spot.
A wired connection Check whether you can run Ethernet to your study area and whether the device you choose needs a specific power supply. If I can run a cable to the end of the hallway, I want to connect a point there without relying on a weak wireless connection. Around 29% of consumers prioritise a wired connection to an additional Wi-Fi point.
Keeping your existing router Check the connection mode and whether the mesh features you want work with your router. I want to keep my provider’s modem, so I’m looking for an extender that works with my existing setup. Around 21% of consumers consider keeping their router the main priority.
Total installation costs Work out how many areas lack coverage, then check which cables, power supplies and devices you’ll need. If I only want to improve Wi-Fi where I study, I don’t want to choose an installation that requires unnecessary equipment. Around 14% of consumers say total installation costs are the deciding factor.

Common buying pitfalls

  • Placing a booster where there’s no Wi-Fi

    A wireless Wi-Fi point needs a usable connection to the network itself before it can pass the signal on.

    First, try a spot between the router and your study area. If there’s no usable signal there, consider a wired connection.

    If the location isn’t suitable, you may need an additional point or a different installation route.

  • Buying a wired access point without checking the power supply

    The Ubiquiti UniFi U6+ uses PoE. For the Deco X50-PoE, TP-Link lists PoE standards 802.3at and 802.3bt, not 802.3af.

    Check the Ethernet connection, the exact model variant, the PoE standard and what’s included in the box.

    Depending on your setup, you may need a compatible PoE injector or PoE switch, as well as a network cable.

  • Assuming the advertised range guarantees coverage in your hallway

    Distance and obstacles affect the connection where you study. A quoted range or speed doesn’t tell you how well the connection will work there.

    Use the specifications to compare options, then test the Wi-Fi where you study.

  • Assuming every extender supports all mesh features

    According to ASUS, the ASUS RP-AX58 works with many routers, but AiMesh features require a compatible ASUS router.

    Check separately that the device works as an extender and supports the specific mesh features you want to use.

Relevant brands to consider

TP-Link

The Deco X50 range includes mesh systems with multiple Wi-Fi points. The Deco X50-PoE is a separate variant designed for installation with a suitable wired power supply.

  • TP-Link describes an access point mode for Deco that works alongside an existing router. The standard Deco X50 can optionally connect its points by cable.
  • Check the model and hardware version: specifications for the X50-PoE V2 don’t automatically apply to other versions.

ASUS

The RP-AX58 can extend an existing Wi-Fi network. Additional AiMesh features are designed for compatible ASUS equipment.

  • ASUS lists an access point mode and support for a wide range of routers, modems and gateways.
  • The speeds and coverage quoted by ASUS are product claims, not a measurement of the connection at the end of your hallway. AiMesh requires a compatible ASUS router.

Ubiquiti

The UniFi U6+ is a wired access point for an installation with Ethernet and PoE where you study.

  • Ubiquiti’s specifications list a GbE connection, PoE power and ceiling or wall mounting.
  • Without a suitable cable and power supply, this isn’t a simple plug-in booster.

FRITZ!

FRITZ!Repeaters are worth considering for extending an existing FRITZ! network, wirelessly or via LAN where the combination supports it.

  • FRITZ! explains how to integrate a repeater into a FRITZ! mesh network via LAN.
  • Check the exact repeater model and your existing FRITZ!Box before relying on brand-specific mesh features.

Joybuy products for mesh and Wi-Fi extension

This selection includes mesh systems, an expandable ASUS router and a Wi-Fi booster. Only choose an additional wireless point for a spot where the existing signal is still usable. For the specific device, also check the required CE marking, as stipulated by the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur).

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

A mesh system for extending Wi-Fi coverage. The product description lists wired backhaul between points.

Wi-Fi 7 (802.11be), dual-band (2,4 GHz and 5 GHz); setup via the ASUS Router app is described.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

According to the product description, the three units work together to form a mesh network that extends across multiple rooms.

Dual-band (2,4 GHz and 5 GHz), Wi-Fi 5 (802.11ac); the stated maximum speed is 1200 Mbps. The description mentions roaming between units.

View at Joybuy
ASUS RT-AX52 dual-band Wi-Fi router

ASUS RT-AX52 AX1800

A router for setting up an expandable ASUS network. The product description mentions extending it with AiMesh-compatible ASUS routers.

Dual-band (2,4 GHz and 5 GHz), Wi-Fi 6 and Gigabit Ethernet; setup via a mobile app is described.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A mesh set with three points. TP-Link lists optional Ethernet backhaul between the units.

Dual-band (2,4 GHz and 5 GHz), Wi-Fi 6 (802.11ax); according to the product description, each unit has three Gigabit Ethernet ports.

View at Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

A wireless booster for extending an existing Wi-Fi network. Place it where the signal is still usable.

The product description mentions a 2,4GHz signal, support for up to 24 devices and configuration via the Mi app.

View at Joybuy

Frequently asked questions

How can you tell whether the problem is your Wi-Fi or your internet connection?

First, compare the internet connection via a network cable with the Wi-Fi in different spots along the hallway. If the wired connection is consistently slow, look into your connection with your provider. An additional Wi-Fi point won’t fix the underlying issue.

Where should you place a wireless Wi-Fi booster?

Don’t automatically put it where there’s no coverage. Instead, try a spot between the router and your study area where the signal is still usable. Test the connection where you study again after installation.

Can a Deco system work alongside your existing router?

According to TP-Link, you can add Deco in access point mode while your existing router manages the network. The setup instructions say to connect the first Deco unit using Ethernet. Check the instructions for your model and chosen mode.

What do you need for a wired access point?

You need an Ethernet connection to the access point’s location, and you should check the power requirements for the exact model. The Ubiquiti UniFi U6+ uses PoE. For the Deco X50-PoE, TP-Link lists 802.3at and 802.3bt, not 802.3af.

Does a Wi-Fi device sold in the Netherlands need a CE marking?

The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that equipment must carry the CE marking. Check the marking on the specific device; a product listing alone doesn’t confirm it.