A group streaming on multiple screens
You’re using several laptops, screens or video calls in the same workspace at the same time. Measure your internet connection and check whether the Wi-Fi network is the bottleneck when everything is in use.
If several screens are mainly in one room, a standalone Wi-Fi 6 router may be suitable if your wired internet connection is fast enough and the Wi-Fi network itself is the bottleneck. If reception is weak in other rooms, mesh or an additional wired access point may be a better choice. Check your internet speed first: a higher advertised Wi-Fi speed won’t fix a slow connection or signal loss through walls. The Dutch Consumers’ Association (Consumentenbond) points out that walls and ceilings can interfere with the signal. Netflix recommends at least 15 Mbps for a single UHD 4K stream, but that isn’t a total bandwidth requirement for multiple screens and other tasks.
You’re using several laptops, screens or video calls in the same workspace at the same time. Measure your internet connection and check whether the Wi-Fi network is the bottleneck when everything is in use.
Participants are working on different floors or behind walls, and reception varies from one workspace to another. In that case, router placement, mesh or an additional access point may matter more than a higher advertised speed class.
Temporary participants connect their own devices. You’ll want to know whether the model you choose has a suitable guest network and how it works with your existing provider’s equipment.
Start by identifying where the connection is falling short: your internet connection, simultaneous use in one room, or reception in workspaces further away.
| Factor to consider | What to look for | Who is this most important for? |
|---|---|---|
| Multiple streams and collaboration | Measure your internet speed over a wired connection and note how many screens will be streaming at the same time. Then compare the Wi-Fi standard and the WAN and LAN ports on the exact model. | If my group is streaming and on video calls at the same time, I want to know whether the connection and network can handle the load. For a weekend project like this, simultaneous use is the main concern for around 36% of consumers. |
| Coverage in workspaces | Test reception where the group will be working. Check whether you can add mesh units or a wired access point. | When participants are working in different rooms, I want a usable connection in each one. Around 29% of consumers give top priority to coverage across separate workspaces. |
| Guest access and management | Check whether the exact model has a guest network that limits access to the local network. Also find out how firmware updates are installed. | If temporary participants bring their own devices, I want to be able to manage their access without assuming every model has the same features. This is the most important buying priority for around 21% of consumers. |
| Connecting to your provider’s equipment | Work out whether the router will sit behind your existing modem or needs to replace it. Follow the connection instructions for your provider and equipment. | When choosing my own router, I want to know in advance how it will work with my existing connection and which settings I’ll need. Around 14% of consumers put a straightforward connection to their provider first. |
A router’s advertised wireless speed class isn’t the same as the speed each device will get in your workspace. Your internet connection, distance, devices and signal reception all play a part too.
First, measure your internet connection over a wired connection, then test Wi-Fi where the group will be working. Compare the results with the number of simultaneous streams and the devices you plan to use.
A more powerful standalone router won’t automatically overcome signal loss caused by walls, ceilings or distance.
Test reception in each workspace and compare better router placement with a wired access point or mesh.
Mesh may require additional units, cables and installation work. Remember to factor in the time needed to position and set up the equipment too.
Connecting a router behind your existing modem is a different setup from replacing the modem. Settings and support may vary depending on your provider and connection.
Decide in advance which setup you want to use and follow the instructions for your connection.
Using your own setup may require extra configuration and mean taking on more responsibility for management and support.
Models and versions can differ in their features and ports. A product title alone isn’t a substitute for checking the full model name and product information.
Before buying, compare the exact version, its listed features and its ports with what your project needs.
The product ranges mentioned include standalone Archer Wi-Fi 6 routers and the Deco X50 mesh system, allowing you to compare a central router with coverage across several rooms.
The RT-AX52 Pro and RT-AX59U are examples of standalone Wi-Fi 6 routers. ASUS also lists AiMesh and access point modes for the RT-AX59U.
The FRITZ!Box 4060 is an example of a standalone router with additional ports and mesh features.
The products below include mesh solutions for workspaces in several rooms, as well as a standalone Wi-Fi 6 router for a central workspace.
No image available
A good fit for workspaces spread across different areas if you’re looking for a mesh solution.
Dual-band: 2.4 GHz and 5 GHz. The product description lists MLO, MU-MIMO, OFDMA, a guest network and wired backhaul.
No image available
A good fit for several workspaces if you’re looking for a mesh system with three units.
Wi-Fi 6; the product description lists OFDMA and MU-MIMO. Each unit is listed with three gigabit Ethernet ports; Ethernet backhaul is optional.
No image available
A good fit if you’re considering a mesh router for workspaces spread across different areas.
The product title lists dual-band and Wi-Fi 7.
No image available
A good fit for a central workspace if you’re looking for a standalone Wi-Fi 6 router.
The product title lists dual-band and gigabit Ethernet. The product description lists OFDMA and MU-MIMO.
No image available
A good fit for workspaces spread across different areas if you’re looking for a tri-band mesh system with three units.
The product description lists 2.4, 5 and 6 GHz bands, plus a 2.5-gigabit Ethernet port on each unit.
First, measure your internet speed over a wired connection and compare it with the speed included in your package. If the wired connection is fast enough but certain workspaces are slow over Wi-Fi, look into router placement, reception and whether you need an additional access point. The 15 Mbps Netflix recommends for one 4K stream isn’t a total capacity requirement for a group project.
Yes. According to ACM ConsuWijzer, you have the freedom to choose your router. Connecting your own router behind your existing modem is different from replacing the modem; if you want to replace it, check your provider’s technical requirements and connection settings.
Check whether the exact model has a guest network that limits access to the local network, change any default passwords and keep the firmware up to date. Having a security feature doesn’t mean a router is safe without the right configuration.
Check the CE marking and product information for the specific version. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that, since 1 August 2025, stricter cybersecurity requirements apply to wireless equipment covered by the relevant rules and placed on the EU market.
In the Netherlands, statutory consumer rights apply alongside a manufacturer’s or seller’s warranty. If a product develops a fault sooner than you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution. There isn’t one fixed statutory two-year warranty period for every router.