First, test the connection where you game upstairs and on the landing. If the signal is the main problem there, a well-placed extra Wi-Fi point may make more sense than simply getting a faster router downstairs. If you can run an Ethernet cable upstairs, compare a wired access point or mesh system with Ethernet backhaul. Without a cable, wireless mesh depends on the connection between the points. None of these options guarantees a particular ping in your home.
Who is this advice for?
Gamer with unreliable Wi-Fi upstairs
If your connection is mainly dropping out where you game, first see whether moving your router or adding another Wi-Fi point helps before replacing the router downstairs. The Dutch Consumers' Association points out that walls and ceilings can interfere with the Wi-Fi signal.
Gamer who can run a cable upstairs
A cable can provide a wired connection between the router and an access point upstairs. That lets you use Wi-Fi for other devices while also having the option of an Ethernet connection for a PC or console.
Household with no route for a cable
If you need to connect wirelessly through a narrow hallway, the position of each mesh point matters: the point upstairs still needs a usable connection to the previous one.
What should you look for?
Wired access point or mesh point
Choose this when: you can run an Ethernet cable upstairs and need Wi-Fi or a wired connection there.
Trade-off: the cable needs to be installed, and your equipment must support the connection or mesh mode you choose.
Wireless mesh system
Choose this when: you can't run a cable and there is a spot between the router and your gaming area where the points can still get a good signal from each other.
Trade-off: distance and obstacles still matter. In a test of the three-pack Deco X50, Tweakers reported lower speeds from more distant wireless satellites and longer response times over multiple wireless hops.
Standalone gaming router
Choose this when: tests show that coverage upstairs is already good enough and you want to change the router's features or connections downstairs.
Trade-off: gaming features or a higher advertised Wi-Fi speed won't automatically overcome a weak signal through a ceiling or down a hallway.
Extending an existing FRITZ!Box network
Choose this when: you have a compatible FRITZ!Box and want to extend your existing network upstairs.
Trade-off: the FRITZ!Repeater 3000 AX is an extender, not a standalone replacement internet router. Check whether it will connect wirelessly or via LAN.
The Dutch Consumers' Association lists walls and ceilings as potential obstacles to the signal. ASUS and TP-Link describe Ethernet backhaul for compatible mesh points; check whether each model supports this type of connection.
| What to consider |
What to look for |
Who this matters to |
| Stable connection where you game |
Check whether you can use Ethernet backhaul and which Ethernet ports are available upstairs. |
If my gaming connection upstairs keeps dropping out, I want to know whether a different point or a cable could help. Around 40% of consumers put a stable connection where they game first. |
| Coverage through the hallway and between floors |
Test the connection on the landing and see where you can place a point with as few obstacles as possible. |
If I need to connect wirelessly through the hallway, I want a spot where the upstairs point can still reach the previous one. Around 30% of consumers prioritise coverage through hallways and between floors. |
| Installation without running a new cable |
Check whether the system can connect wirelessly and whether the upstairs point has an Ethernet port for your gaming device. |
If I can't run a cable upstairs, I want to know whether the wireless connection between the points will remain usable. Around 20% of consumers prioritise installation without a cable. |
| Existing equipment and running costs |
Check compatibility with your router, the ports available and any subscription terms for the features you want to use. |
If I want to keep my current router, I want to know how the extender connects to it and whether the features I want come with extra conditions. Around 10% of consumers prioritise compatibility and running costs. |
Common buying mistakes
-
Assuming a higher advertised Wi-Fi speed means better coverage upstairs
Walls, ceilings and distance affect the signal. A product's speed rating alone won't tell you how the connection will perform in your home.
First, test the connection where you game and on the landing. Then compare possible locations for an extra point or access point.
If a new router doesn't solve the coverage problem, you may still need an extra Wi-Fi point or a cable.
-
Putting a wireless point where the Wi-Fi signal already drops out
An extra point also needs a usable connection to the previous one. A spot closer to where you game won't help if the connection back to the router is too weak there.
Try a spot with fewer obstacles and check the connection. Consider Ethernet backhaul if you can run a cable and your equipment supports it.
-
Assuming every version of a mesh system has the same ports
The Ethernet ports available can vary between a mesh router and a standalone extender. According to eero, the eero 6+ extender has no Ethernet ports.
Check the full model name, what's included in the set and the ports on the specific point you want to connect your gaming device to.
Brands to compare
TP-Link
The Deco X50 is a dual-band Wi-Fi 6 mesh system, available in sets with different numbers of points. TP-Link lists three gigabit ports per unit.
- The set size and ports may matter if you want to use multiple points or a wired connection.
- In a test of the three-pack X50, Tweakers reported lower speeds from more distant wireless satellites and longer response times over multiple hops. These test results don't automatically apply to other Deco models or a wired setup.
ASUS
ASUS AiMesh lets you extend a network using compatible ASUS routers. ASUS lists AiMesh, a 2.5G port and gaming management features among the specifications of the RT-AX86U Pro.
- ASUS describes Ethernet backhaul as an option when distance or obstacles weaken the wireless connection between AiMesh points.
- The RT-AX86U Pro's features don't prove that one router will reach your gaming area at home; check with a test.
FRITZ!
The FRITZ!Repeater 3000 AX is a mesh extender for use with an existing FRITZ!Box, among other options. FRITZ! lists two gigabit LAN connections.
- Could be an option if you want to keep your existing main router and extend your network.
- The repeater isn't the same as a complete replacement internet router. Check compatibility with your router and whether you'll connect it wirelessly or via LAN.
eero
The eero 6+ is a mesh router. According to eero, the router version has two 1GbE ports.
- The router version has connections to consider when choosing your main router.
- According to eero, the standalone eero 6+ extender has no Ethernet ports, so check which version you need.
Joybuy products for extending Wi-Fi
These Joybuy products are mesh systems for extending Wi-Fi to a gaming area upstairs. Compare the connection between the points, the ports and support for a wired connection with each set.
No image available
TP-Link Deco BE68 (2-pack)
A two-point mesh system for comparing Wi-Fi coverage and wired connectivity.
The product information lists Wi-Fi 7, MLO and 10Gbps, 2.5Gbps and 1Gbps WAN/LAN ports.
View at Joybuy
No image available
ASUS ZenWiFi BD4
A mesh option to compare if you want to use multiple Wi-Fi points and are considering a wired connection between them.
The product information lists Wi-Fi 7 and two 2.5Gbps Ethernet ports.
View at Joybuy
No image available
TP-Link Deco X50-PoE (2-pack)
A two-point mesh set to compare for extending Wi-Fi upstairs.
The product information lists dual-band Wi-Fi 6, PoE support and two Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack)
A three-point mesh system to compare if you want to connect several areas of your home.
The product information lists tri-band Wi-Fi 6E and three gigabit Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 (2-pack)
A two-point mesh system to compare for extending coverage to your gaming area upstairs.
The product information lists dual-band Wi-Fi 6, optional Ethernet backhaul and three gigabit Ethernet ports per unit.
View at Joybuy
Frequently asked questions
Where should you put a wireless Wi-Fi point in a narrow hallway?
Don't automatically put the point in the middle of the hallway. Try a spot with as few obstacles as possible where it can still get a good signal from the previous point. After setting it up, check the connection using the system's tools.
When is it worth considering a cable upstairs?
A cable is an option if you can connect the router and the point upstairs with a wire, and your chosen equipment supports that connection. This means the connection between the points doesn't have to be wireless. Also check whether there's an Ethernet port upstairs for your PC or console.
Can I use my own router instead of the one supplied by my internet provider?
In principle, you can choose your own end-user equipment in the Netherlands. According to ACM ConsuWijzer, a provider may refuse a device, for example, if it doesn't meet the applicable security requirements. Ask for the connection settings you need if you want to replace your provider's equipment. Adding another router or access point behind your existing modem is a different setup.
Does a wireless router sold in the Netherlands need a CE mark?
For radio equipment that meets the applicable EU requirements, the manufacturer applies a CE mark, according to the Dutch Authority for Digital Infrastructure. Stricter digital security requirements for wireless equipment have also applied since 1 August 2025. A product name or overseas specification alone doesn't show that a particular device meets all applicable requirements.
What should I check if a mesh set includes an extender?
Check the exact version and the ports on the point you want to connect your gaming device to. According to eero, for example, the standalone eero 6+ extender has no Ethernet ports, so don't assume every point in a set has the same connections.