Gamer on another floor
Your wired internet speed is fine, but the Wi-Fi signal by your console or PC isn’t. Focus on coverage, where the nodes are placed and how they connect to each other.
First, measure your internet speed using an Ethernet cable and compare it with the Wi-Fi signal where your console or PC is. The Consumentenbond recommends testing your connection over a cable, as a new router won’t fix a slow internet connection. If the connection between floors is the main problem and you have Ethernet cabling, a wired access point or mesh system with Ethernet backhaul could be a good fit. If you don’t have a cable, wireless mesh may be an option, but placement and the connection between the nodes are still key.
Your wired internet speed is fine, but the Wi-Fi signal by your console or PC isn’t. Focus on coverage, where the nodes are placed and how they connect to each other.
Other devices are using the connection at the same time. You want to know whether the Wi-Fi signal where you play and your devices’ connections are suited to how you use them.
You want to add Wi-Fi on other floors without replacing your existing modem-router unnecessarily. Check whether the system you choose has an access point mode and how it connects.
Choose this when: your wired internet speed is good and the router’s current position is limiting your Wi-Fi.
Trade-off: moving it could make an extra device unnecessary, but it won’t solve every obstacle or reach every floor.
Choose this when: you can run a network cable to the problem floor and want to add Wi-Fi there.
Trade-off: the nodes can be connected via Ethernet, but you’ll need to consider cabling, ports and any power requirements.
Choose this when: you want Wi-Fi on several floors and can’t run a network cable between the nodes.
Trade-off: the wireless connection between the nodes and where you place them affect how well the system works.
Choose this when: the router itself is underperforming and one device in a better position could provide enough coverage.
Trade-off: a new router can’t remove floors and walls, so check the signal where you download first.
The Consumentenbond recommends testing your connection over a cable first, then checking Wi-Fi performance at different distances and on different floors. Next, compare the Wi-Fi signal where your gaming device is with the wired connection.
| What to consider | What should you check? | Who should consider this most? |
|---|---|---|
| Coverage between floors | Check how many nodes you need, where to place them and whether Ethernet backhaul is possible. | If I game on another floor, I mainly want to make sure the nodes can connect to each other reliably. Around 33% of consumers put coverage and the connection between floors first. |
| Speed where you play | First test your connection over a cable, then check Wi-Fi on the floor where you download. Also check whether your device can use Ethernet. | When other devices are online at the same time, I want to know what speed my gaming device gets there. Around 27% of consumers prioritise download speed in that location. |
| Connection to your broadband provider’s network | Check for access point mode, available Ethernet ports and any connection instructions from your provider. | If I want to keep using my modem-router, I want to extend my Wi-Fi without replacing my existing network equipment unnecessarily. Around 20% of consumers prioritise keeping that equipment. |
| Total cost and equipment | Consider the number of nodes, any cabling, a suitable PoE power supply and power consumption. | If I only need coverage in a few places, I don’t want to buy more equipment or installation than necessary. Around 20% of consumers prioritise the total cost. |
Your internet connection, obstacles, equipment placement and gaming device all affect the speed you get in that spot. The Wi-Fi generation alone won’t predict it.
First test your connection over a network cable, then check it where you download. Compare the results before choosing your equipment.
An extra node needs a usable connection to the rest of the network to extend your Wi-Fi.
Place the node somewhere it can still connect reliably to the router or another mesh node. Use Ethernet backhaul if suitable cabling is available.
For the Deco X50-PoE, TP-Link lists IEEE 802.3at and 802.3bt as supported standards; IEEE 802.3af is not supported.
Before installation, check the PoE standard and the power supply’s power budget for the number of nodes you need. You may need a compatible PoE switch or injector.
These models illustrate different ways to extend your Wi-Fi. The specifications listed are not measurements of download speeds in your home.
The Deco X50-PoE is a Wi-Fi 6 mesh system with Ethernet ports and options for table, wall or ceiling placement.
The two-node ZenWiFi BT8 set reviewed here is for anyone looking for extendable AiMesh Wi-Fi and a wired backhaul option.
The FRITZ!Repeater 3000 AX extends an existing network, either wirelessly or as a wired access point.
The Orbi 770 range includes the three-node RBE773 set reviewed here.
These products are mesh systems and mesh nodes for extending Wi-Fi to several areas of your home, with both wired and wireless options for connecting the nodes.
Image unavailable
A two-node mesh set for extending Wi-Fi to several areas of your home, with the option of wired backhaul.
ASUS lists tri-band Wi-Fi 7 and two 2.5G Ethernet ports for this model. Its stated Wi-Fi features alone don’t determine download speeds on another floor.
Image unavailable
A two-node mesh option for extending Wi-Fi to different areas of your home, with the option of using Ethernet backhaul.
The product information lists Wi-Fi 6 and the option of Ethernet backhaul. Before installation, check that your cabling and connections are suitable for the setup you have in mind.
Image unavailable
A three-node set for adding Wi-Fi to several areas of your home.
The product information lists dual-band Wi-Fi 6 and three Ethernet ports per node. Check the ports and how you plan to connect the nodes when planning your installation.
Image unavailable
A three-node mesh set for extending Wi-Fi to several areas of your home.
The product information lists tri-band Wi-Fi 6E and three Ethernet ports per node. Check that the Wi-Fi features suit your devices and that there are connections nearby where you plan to place the nodes.
Image unavailable
A three-node mesh set for extending Wi-Fi to several areas, with the option of PoE power.
The product information lists two Ethernet ports per node and PoE support. TP-Link specifies IEEE 802.3at or 802.3bt as suitable PoE standards; 802.3af is not supported.
Not before testing your connection over a network cable. If the wired connection is slow, look into your broadband connection or talk to your provider if speeds are repeatedly disappointing. If the Wi-Fi on another floor is the main problem, check the placement and coverage.
Yes. A system with access point mode can let your existing router manage the network. TP-Link describes this option for Deco; also check the mode and installation instructions for the system you choose.
For the Deco X50-PoE, TP-Link specifies a PoE source compliant with IEEE 802.3at or 802.3bt; IEEE 802.3af is not supported. TP-Link also lists a DC adapter as an alternative, so check which power option suits your setup.
According to ACM ConsuWijzer, you’re free to choose your router, although a provider may refuse to allow you to use a particular device if, for example, it’s unsafe. Check your provider’s connection requirements before replacing an existing modem or router.
Factor in the power consumption of all mesh nodes that stay switched on. The Consumentenbond includes energy consumption in its tests; usage in your home will depend on the devices you choose and how you use them.