Who is this buying guide for?

Downloading on a floor with weak Wi-Fi

If your console or PC is a long way from the router, first check whether a network point on that floor can still receive a usable connection from the router. NETGEAR recommends placing a repeater between the router and the computer, within the router’s wireless range.

Wi-Fi needed on multiple floors

If you need coverage on other floors as well as where you play, consider how many points you need and how they connect to each other. The Consumers’ Association recommends positioning Wi-Fi points so they can communicate well, with as few obstacles between them as possible.

A possible cable route to your gaming area

If you can run a network cable to the floor where you play, check that your chosen device can operate as an access point and that its ports suit your setup. TP-Link and ASUS describe an access point mode for the relevant models; check the requirements for the exact version you’re considering.

What should you look for when buying?

One wireless repeater

Suitable when: reception is poor mainly in one area and the repeater itself can still get a good connection to the router.

Trade-off: a repeater can’t improve a weak incoming signal by itself; the wireless connection back to the router remains a key factor.

Mesh system with multiple points

Suitable when: you need coverage on multiple floors and can position the points so they connect well with each other.

Trade-off: extra points mean a larger setup, and won’t automatically fix a weak connection between points.

Ethernet to an access point

Suitable when: you can run a cable from the router to the floor where your console or PC is.

Trade-off: you’ll need to check the cable route, access point mode and available ports.

Powerline with Wi-Fi or LAN adapter

Suitable when: running a cable isn’t practical and the wireless connection between floors isn’t good enough.

Trade-off: actual throughput also depends on your electrical installation and the conditions on your power circuit.

Concern What to look for when buying Who is this important for?
Download speed where you play Compare the connection at the router, network point and console or PC. Also check whether the connection between points is wireless or via Ethernet. If I mainly want to download a large update where I play, I want to know how the whole connection works. Around 36% of consumers prioritise download speed in that location.
Coverage on multiple floors Work out which floors have poor coverage and whether each point still has a good connection to the previous one in its chosen location. If I need Wi-Fi on more than one floor at home, the positioning of every point matters. Around 29% of consumers prioritise coverage on multiple floors.
Wired connection for a console or PC Check whether you can run Ethernet to that floor, whether the device has access point mode and which ports will remain available. If I can run a cable, I want to know whether it can also provide a wired connection between the router and an extra network point. Around 21% of consumers prioritise a wired connection.
Purchase and installation Compare the complete setup you need, including any cable installation. Only factor in paid features if you plan to use them. If I want to get the coverage I need with as little extra equipment or installation work as possible, I compare the complete setup. Around 14% of consumers prioritise keeping purchase and installation requirements to a minimum.

Common buying mistakes

  • Assuming the advertised Wi-Fi speed is your guaranteed download speed

    The connection between the router, any extra points and your console or PC can affect download speeds where you play. In a Tweakers test, speeds were lower with the more distant wireless satellites in the Deco X50 setup they tested. That result applies to that system and setup.

    Consider the whole connection to your gaming area, and test it where you plan to download the update.

  • Putting a repeater where the router signal has almost disappeared

    A repeater needs to receive a wireless connection from the router itself before it can pass it on.

    Find a midway position where the router signal is still usable. If that doesn’t work, compare a wired access point or mesh setup; test powerline using the sockets you plan to use.

  • Assuming an Ethernet port automatically means Ethernet backhaul

    A cable from your console to a repeater is not the same as a cable from the router to the network point. Only the latter provides a wired connection between those points.

    Check the operating mode, the route for the cable from the router and how many ports will remain for your devices.

    A wired setup may require cable installation or, depending on the number of ports, extra network equipment.

  • Comparing the cost of just one device

    A weak signal on several floors may require more than one network point. In the Deco X50 setup tested, some extra features were also tied to a subscription; this doesn’t automatically apply to other models.

    Compare the setup you need, and only factor in paid features if you plan to use them.

    Multiple points and optional paid features can increase the size of the setup you need.

Brands to consider

TP-Link

Offers both standalone repeaters and Deco mesh systems. First decide whether you need to improve one weak spot or cover several floors.

  • TP-Link lists a gigabit port and access point mode for the RE705X.
  • In the Tweakers test, speeds were lower with the more distant wireless satellites in the Deco X50 3-pack. This result applies to the specific system and setup tested.

ASUS

The RP-AX58 can be used as a repeater or access point. AiMesh is worth considering if your router is compatible.

  • ASUS describes a wired connection for access point mode or an AiMesh node.
  • According to ASUS, you need a compatible AiMesh router to use it as an AiMesh node. An advertised maximum speed is not a measurement of downloads across three floors.

FRITZ!

The FRITZ!Repeater 1200 AX is a standalone Wi-Fi 6 repeater with a gigabit LAN port.

  • The manufacturer lists a gigabit LAN port for a wired network device, such as a games console.
  • Check whether the port is needed for the router connection, the end device or both in your intended setup.

devolo

The Magic 2 WiFi 6 next Starter Kit is a powerline option if running a cable between floors isn’t practical.

  • devolo lists two gigabit LAN ports on the Wi-Fi adapter.
  • devolo says that factors including interference on the wiring and the quality of your electrical installation affect actual throughput. So the advertised speed isn’t guaranteed in your home.

Joybuy products

These Joybuy product picks cover powerline, a standalone repeater, mesh points and a wired access point. Before buying, check that the exact version carries the required CE marking. According to the Dutch Authority for Digital Infrastructure, a brand name or sales listing alone does not prove that the relevant requirements have been met.

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

A powerline starter kit to consider if running a network cable between floors isn’t practical.

View at Joybuy
TP-Link TL-WA850RE 300 Mbps Universal

TP-Link TL-WA850RE 300 Mbps Universal

A standalone repeater to consider if reception is poor mainly in one area and the repeater itself can still connect to the router.

The product name lists 300 Mbps; this isn’t a measured download speed where you play.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 (3-Pack) Dual-Band Wi-Fi 5

A mesh system with three points to consider if you want to extend coverage in several areas.

The product name lists dual-band (2.4 GHz/5 GHz) and Wi-Fi 5 (802.11ac). Position the points so they can communicate well with each other.

View at Joybuy
TP-Link Omada EAP653 Wireless Access Point

TP-Link Omada EAP653

A wireless access point to consider if you can run Ethernet to the floor where you play.

Check that the cable route, required ports and intended mounting method suit your setup.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-Pack) Tri-Band Wi-Fi 6E

A mesh system with three points to consider if you want to extend Wi-Fi coverage to several areas of your home.

The product name lists tri-band (2.4 GHz/5 GHz/6 GHz) and Wi-Fi 6E (802.11ax). Having multiple points doesn’t in itself guarantee a good connection through floors.

View at Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Place a wireless repeater between the router and the area where you play, somewhere it can still receive the router’s signal. Use the positioning indicator or setup app, then test the connection by your console or PC.

Does a LAN cable from the console to a repeater make the whole connection wired?

No, not if the repeater itself connects to the router wirelessly. To make that connection wired, check whether the device supports access point mode and whether you can run a cable from the router.

How can you keep a Wi-Fi extender safe to use?

Follow the setup instructions, use a strong Wi-Fi password and keep your router and Wi-Fi points up to date. These steps don’t replace checking that the exact version meets the relevant product requirements.

What are your rights if a network point bought online doesn’t meet requirements?

For online purchases, you generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. The seller is also responsible for the statutory guarantee if the product doesn’t meet what you could reasonably expect. In the Netherlands, this statutory guarantee has no fixed time limit.

Which product regulation should you check in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet the relevant European requirements for radio equipment. According to the Dutch Authority for Digital Infrastructure, the manufacturer applies the CE marking when the device meets the relevant requirements. Check the marking and the exact version.