Who is this relevant to?

Housemates who are online at the same time

You want to download a large update while others are on calls, streaming or studying. The Consumentenbond points out that a wired test helps distinguish an internet connection problem from a Wi-Fi problem. Also consider which setup and settings are suitable for your shared network.

Gamers with poor Wi-Fi in their room

Your connection works better near the modem than it does in your room. The position of the Wi-Fi access point and whether access points can be connected by cable may affect your choice. The Consumentenbond describes Wi-Fi access points as one way to extend coverage around the home.

Gamers who want to find out what’s causing slow downloads

You want to know whether a different router is worthwhile before buying anything. A test using an Ethernet cable helps distinguish the speed of your internet connection from Wi-Fi coverage where you download, as recommended by the Consumentenbond.

What should you consider when choosing?

First test your connection using a cable, then compare Wi-Fi in your room. Only change your setup once you know where the problem lies.

Keep your existing equipment and test it

Choose this if: you don’t yet know whether the delay is caused by your internet connection or the Wi-Fi in your room.

Bear in mind: testing and moving the Wi-Fi access point takes time, but won’t solve a lack of coverage or ports.

Standalone Wi-Fi router

Choose this if: your internet connection is fast enough and one centrally positioned Wi-Fi access point can reach the rooms that matter most.

Bear in mind: check how the router works with your provider’s equipment and who will manage the network.

Wired access point or wired mesh Wi-Fi

Choose this if: a room further away has poor coverage and you can run an Ethernet cable to it.

Bear in mind: you’ll need a cable and suitable ports, but you can position the Wi-Fi access point closer to the room.

Wireless mesh Wi-Fi

Choose this if: several rooms or floors have poor coverage, running cables isn’t an option and you can place the access points in suitable locations.

Bear in mind: extra access points need space and power sockets. The connection between wireless access points still depends on where you place them.

What to consider What should you check? Who is this most relevant to?
Download speed and the cause Compare a test using an Ethernet cable with Wi-Fi where you play. If I don’t know whether my connection or Wi-Fi is slowing down the update, I want to find out before buying anything. Around 27% of consumers mainly want to know what’s causing a slow download.
Using the connection at the same time Check who manages the router, which devices connect by cable and whether the exact model has suitable settings for prioritisation or bandwidth. When housemates are streaming, on calls or studying at the same time, I want to know how the shared connection is managed without unnecessarily disrupting their use. Around 33% of consumers mainly prioritise managing the shared connection.
Wi-Fi coverage in your room Test the connection where you download and decide whether a single router, a wired access point or several mesh access points can be positioned there practically. If Wi-Fi works well by the modem but is weak in my room, I want to know where an extra or relocated access point could go. Around 27% of consumers are mainly concerned about coverage in their own room.
Installation and management Check whether the provider’s equipment will stay in place, which operating mode you need and how firmware updates are made available for the exact model. If we share a network, I want us to agree in advance who will change the settings and install updates. Around 13% of consumers mainly prioritise straightforward shared management.

Common buying mistakes

  • Confusing the advertised Wi-Fi speed with the speed of a game update

    Your provider’s internet connection and your home’s wireless conditions are two different potential limitations. So a higher stated Wi-Fi speed doesn’t prove that your update will download faster.

    First compare a test using an Ethernet cable with Wi-Fi in your room. Then decide whether you need a different router.

  • Buying mesh Wi-Fi without deciding where to put the extra access points

    Coverage partly depends on where the access points are placed and how they connect to each other. Extra units need space and power sockets; a wired setup also needs a suitable Ethernet cable.

    Decide in advance where you can place the access points, and compare wireless placement with Ethernet backhaul if you can run cables.

  • Thinking QoS gives you more internet bandwidth

    QoS or bandwidth limits divide up available capacity; they don’t make your internet connection faster. Limiting a game download could actually make it take longer.

    Check whether the feature is available on the exact model and only use it to address the specific problem you want to solve.

Brands to compare

TP-Link

Compare the standalone Archer AX55 with the Deco X50 mesh range: a central Wi-Fi access point and coverage in several rooms call for different setups.

  • TP-Link lists Wi-Fi 6 for both of these models and Ethernet backhaul for the Deco X50.
  • Check the pack size and hardware version. These manufacturer specifications don’t measure coverage in a shared student house.

FRITZ!

The FRITZ!Box 4060 is worth comparing if you’re looking for a router to use behind a separate modem, with wired connections.

  • FRITZ! lists one 2.5-gigabit WAN port and three gigabit LAN ports for the 4060.
  • Check that it’s compatible with your provider’s modem and your local network setup.

ASUS

Worth comparing if settings for managing shared network traffic are important to you.

  • ASUS documents QoS and bandwidth limits for supported routers.
  • Not every ASUS model has the same features, so check the exact model. These settings won’t increase your internet speed.

NETGEAR

The Nighthawk RAX10 is a standalone Wi-Fi 6 router to compare if you’re looking for a single Wi-Fi access point.

  • NETGEAR provides model-specific support for the RAX10, including manuals and firmware.
  • A support page doesn’t tell you how long future support will last or what coverage you’ll get in every room.

Products at Joybuy

This selection includes standalone Wi-Fi routers and mesh systems for a single central access point or coverage in several rooms. First decide which setup suits your home, then check how it connects to your provider’s existing equipment.

ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 Wi-Fi 6 router

An option if a single centrally positioned router suits your rooms and existing network.

Listed features include dual-band 2.4 GHz and 5 GHz, three gigabit Ethernet ports, QoS, OFDMA and MU-MIMO. The description also mentions expanding coverage with AiMesh routers. Check which features suit your network setup.

View at Joybuy
TP-Link Deco X50-PoE dual-band mesh system with 2 access points

TP-Link Deco X50-PoE 2-pack

A two-access-point mesh system to consider if you need Wi-Fi in several rooms.

Listed features include Wi-Fi 6, dual-band 2.4 GHz and 5 GHz, and two Ethernet ports per access point. The description also mentions PoE, wired and wireless backhaul, QoS, OFDMA and MU-MIMO. Check which connection and operating mode are suitable for your existing modem.

View at Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system with 3 access points

TP-Link Deco XE75 Pro 3-pack

A three-access-point mesh system to consider if you need Wi-Fi in several rooms.

Listed features include tri-band 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 6E, and three Ethernet ports per access point. The description also mentions QoS and guest access. Check that your connected devices and existing network support the features you want.

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh system with 3 access points

TP-Link Deco XE75 3-pack

A three-access-point mesh system to consider if you need Wi-Fi coverage in several rooms.

Listed features include tri-band 2.4 GHz, 5 GHz and 6 GHz, and Wi-Fi 6E. The description also mentions three Ethernet ports per access point and QoS. Check the connections and operating mode required for your existing network.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system with 3 access points

TP-Link Deco X50-PoE 3-pack

A three-access-point mesh system to compare if you need Wi-Fi coverage in several rooms.

Listed features include dual-band 2.4 GHz and 5 GHz, and Wi-Fi 6. The description also mentions two Ethernet ports per access point, PoE, QoS and guest access. Check that your planned setup supports PoE and has the right connections.

View at Joybuy

Frequently asked questions

Should we change our broadband package or router if an update is downloading slowly?

Don’t replace either until you’ve looked into the cause. First test using an Ethernet cable, then try Wi-Fi where you play. If the wired speed is still clearly below what your provider promises, contact them. The Consumentenbond recommends a wired test to assess internet speed.

Can we use our own router with the existing modem?

Adding a router or access point is one possible setup, but the settings and operating modes of both devices need to be compatible. ACM ConsuWijzer explains that you have a choice of router and says your own modem must meet the applicable network and security requirements.

Who looks after the router once it’s installed?

Agree who will have access to the settings and install firmware updates. ACM ConsuWijzer stresses that your own device needs to be kept up to date.

What about the warranty if a router you’ve bought breaks down early?

In the Netherlands, statutory consumer rights apply alongside any manufacturer’s or retailer’s warranty. According to ACM ConsuWijzer, if a product doesn’t meet what you could reasonably expect under normal use, the seller must resolve the issue subject to the applicable conditions. There isn’t one fixed statutory warranty period that automatically applies to every router.

Which Dutch rules apply when buying a Wi-Fi router?

Radio equipment placed on the EU market must meet the applicable European requirements and carry a CE marking. The Rijksinspectie Digitale Infrastructuur states that additional RED cybersecurity requirements have applied since 1 August 2025 to radio equipment covered by those requirements. Check the marking and product information for the version supplied.