Designer with slow uploads
Wants to send a design file from their workspace and first check whether Wi-Fi or their internet connection is the bottleneck. The Consumentenbond and ACM ConsuWijzer explain why upload speed and a wired speed test matter.
First, measure your upload speed using a cable connected to your router and compare it with the connection at your workspace. A repeater can improve a weak Wi-Fi connection, but it cannot increase the upload speed of your internet connection. If there’s a suitable midway spot with a power socket, a plug-in repeater could work; if you can run a cable to your workspace, an access point is another option. For either choice, check that the specific model is suitable for your setup.
Wants to send a design file from their workspace and first check whether Wi-Fi or their internet connection is the bottleneck. The Consumentenbond and ACM ConsuWijzer explain why upload speed and a wired speed test matter.
Needs a Wi-Fi point that can use a suitable power socket, without having to make room for a separate device. Also check the dimensions of the exact model and the space around the socket.
Can run a cable to their workspace and wants to check whether a wired access point would suit their setup better than wireless repeating.
A good fit when: there’s a spare power socket somewhere between the router and your workspace, and the repeater can still receive a usable signal from the router there.
Bear in mind: the wireless connection between the router and repeater remains the limiting factor, and the device must physically fit at the socket.
A good fit when: you can run an ethernet cable to or near your workspace, and your chosen model supports access point mode.
Bear in mind: you’ll need a cable route and a suitable place for the access point.
A good fit when: coverage is poor in several rooms, not just where you upload files.
Bear in mind: you’ll need more devices and power sockets. Check that the mesh features work with your router and other Wi-Fi points.
The Consumentenbond highlights the importance of upload speed when sending files. ACM ConsuWijzer recommends using a wired connection close to the connection point to assess your internet speed.
| What to consider | What to look for when buying | Who should pay extra attention? |
|---|---|---|
| Uploads at your workspace | Compare wired test results by the router with results at your workspace; repeat the tests at different times if needed. | If I send design files, I want to know whether my internet connection or local Wi-Fi is the limiting factor. Around 33% of consumers prioritise diagnosing upload issues. |
| Limited space for the device | Check the dimensions of the exact model, any aerials and the space around neighbouring sockets. | If there’s no spare shelf, I’m looking for a device that fits a suitable power socket. Around 27% of consumers prioritise how the device fits into their space. |
| Usable range | Test a midway power socket, taking obstacles and the router’s position into account. | If the connection is weak in my workspace, I want to know whether the repeater will still receive a strong enough signal from the router at a midway spot. Around 27% of consumers prioritise range. |
| Wired connection | Check whether you can run a cable and whether the model has an ethernet port and access point mode. | If I can run a cable to my workspace, I want to factor that into my choice of access point. Around 13% of consumers prioritise a wired connection. |
A stated Wi-Fi speed doesn’t tell you how quickly your design file will upload through your internet connection. The Consumentenbond emphasises the importance of upload speed when sending files.
Before you buy, run a wired test by the router and compare it with the connection at your workspace, as ACM ConsuWijzer recommends when assessing internet speed.
According to FRITZ!, the FRITZ!Repeater 1200 AX is a compact Wi-Fi 6 repeater with one gigabit LAN port. FRITZ! Mesh is relevant if you have a compatible FRITZ! setup.
According to TP-Link, the RE705X combines Wi-Fi 6, a gigabit port and access point mode.
According to devolo, the WiFi 6 Repeater 3000 is a plug-in repeater with gigabit LAN and access point mode.
According to D-Link, the DAP-X1860 is a plug-in repeater with Wi-Fi 6, gigabit ethernet and a signal indicator.
This selection includes wireless plug-in repeaters and wired access points for workspaces with a cable route. Before buying, check that the specific model has the required CE marking and conformity information. The RDI describes this as a requirement for radio equipment placed on the European market.
No image available
The plug-in design described could be a good fit if you have no spare shelf space and the repeater can still receive a signal from the router at a midway spot.
Specifications: 2.4 GHz, up to 300 Mbit/s and an ethernet port. The stated speed isn’t a measured upload speed.
Check that it physically fits, and check the CE marking and conformity information for the exact model.
No image available
The direct plug-in design described could suit a workspace with no spare shelf space, provided the repeater can still receive a signal from the router there.
The specifications list 2.4 GHz, up to 300 Mbit/s and two external aerials. These aren’t measured upload speeds.
Check that it physically fits, and check the CE marking and conformity information for the exact model.
No image available
This wall- or ceiling-mounted access point could suit a workspace where you can connect an ethernet cable and want to keep shelf space free.
The specifications list Wi-Fi 6, a gigabit ethernet port and PoE. Check what cabling and installation setup you’ll need.
Check the CE marking and conformity information for the exact model.
No image available
The plug-in installation described could suit you if you’re looking for a repeater to provide local Wi-Fi coverage and want to keep shelf space free.
The specifications list Wi-Fi 6, dual-band and an ethernet port. The stated wireless speeds aren’t measured upload speeds.
Check that it physically fits, and check the CE marking and conformity information for the exact model.
No image available
This wall-mounted access point could suit you if you can run a cable to your workspace and want to avoid using shelf space.
The specifications list Wi-Fi 7, PoE and three ethernet ports, including 2.5G support.
Check the cabling and installation setup you’ll need, as well as the CE marking and conformity information for the exact model.
No. The upload speed of your internet connection also matters. First, compare a wired test by the router with the connection at your workspace. A higher stated Wi-Fi speed doesn’t guarantee faster internet uploads. The Consumentenbond highlights the importance of upload speed when sending files.
Choose a midway spot where the repeater can still maintain a usable connection to the router. Try different power sockets if needed, and use any positioning indicator to help. The Consumentenbond also recommends using a strong password, keeping your equipment up to date, and using WPA3 or at least WPA2 security.
In the Netherlands, you have a statutory guarantee as well as any manufacturer’s warranty: the product must do what you could reasonably expect it to do. ACM ConsuWijzer states that there is no standard two-year time limit that applies in every case. Online consumer purchases often also come with a 14-day cooling-off period after delivery, subject to exceptions.
No, not unless it meets the applicable requirements. The Dutch Authority for Digital Infrastructure warns that radio equipment from outside Europe may use frequencies that aren’t permitted here. Radio equipment placed on the European market must meet the applicable requirements and carry a CE marking. Check the specific model and its accompanying information, not just the model name.