Who should consider these options?

File sharer with a cable running upstairs

Regularly shares project files between workstations on different floors and can connect a network point using a cable. The Consumers’ Association describes testing Wi-Fi extenders over both Wi-Fi and cable; TP-Link lists Ethernet backhaul for the Deco X50.

Worker with one floor with weak coverage

Has poor coverage mainly on one floor and is considering an extension without running new cables. The Consumers’ Association points out that walls and ceilings affect the Wi-Fi signal, so where you place a repeater matters too.

Resident with several weak spots

Has connection problems on different floors and needs to weigh up the number of nodes, where to place them and how they connect to the existing router.

What should you look for when buying?

First, find out whether you can run a cable to the floor in question. Then consider whether one extender will be enough or whether several areas need attention. The Consumers’ Association notes that walls and ceilings can affect the Wi-Fi connection.

Buying concern What to look for Who considers this important?
File transfers between floors Check whether Ethernet backhaul or access point mode is available, and which connections you need. If I share project files between floors, I want to know whether the connection will remain usable at my workstation. Around 36% of consumers put file transfers first.
Coverage on the floors you need Map out weak spots and check how many nodes are included, and where they can still connect reliably to the network. If you need coverage on several floors, you’ll want to know whether the planned nodes can serve those areas. Around 36% of consumers prioritise coverage.
Connection to your existing router Check the router requirements for OneMesh, AiMesh or FRITZ! mesh; check access point mode separately. If I want to keep using my current router, I want to know in advance which features will actually work with it. Around 18% of consumers put this compatibility first.
Security and maintenance Check which Wi-Fi security standards are supported and whether firmware updates are available. If you share project files over your home network, you’ll also want to keep on top of security settings and maintenance. Around 10% of consumers make this their top priority.

Common buying mistakes

  • Confusing the maximum Wi-Fi speed with the speed of your project file transfers

    A stated Wi-Fi speed isn’t a measure of file transfer speeds across your floors, devices and connections between Wi-Fi nodes.

    First choose between a wireless and a wired connection, then assess the connection at the workstations where you share files.

  • Placing a repeater where the existing signal is already weak

    Distance, walls and ceilings can also weaken the connection the repeater itself needs to the router.

    Check the signal at possible intermediate locations. If there’s no usable wireless connection there, consider a wired access point.

    If there’s no suitable location for a wireless connection, you may need an additional node or cabling.

  • Assuming every product labelled ‘mesh’ will form a single mesh network with your current router

    OneMesh, AiMesh and FRITZ! mesh each have product-specific compatibility requirements.

    Check the exact router model and the mesh features you want. A standard Wi-Fi connection doesn’t automatically mean that all mesh features will be available.

  • Comparing just one Wi-Fi node for a home with several floors with weak coverage

    An additional node won’t necessarily be enough for every floor; placement and the connection to the network still matter.

    Compare how many nodes you need, the connection options and the system’s energy consumption.

Brands to consider

TP-Link

Offers both standalone repeaters and multi-node Deco systems, making it worth considering if you want to tackle one weak spot or several floors.

  • TP-Link lists a gigabit port and access point mode for the RE705X. Ethernet backhaul is optional for the Deco X50.
  • OneMesh requires a compatible OneMesh router. A stated coverage area isn’t a measurement of performance in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is an extension option if you want to expand an existing FRITZ! setup.

  • FRITZ! lists three Wi-Fi bands and two gigabit LAN ports for this model.
  • The integrated mesh functionality described relies on working with a FRITZ!Box; it doesn’t tell you how quickly files will transfer in your home.

ASUS

The RP-AX58 is a standalone repeater with access point mode; AiMesh is relevant if your router is compatible.

  • ASUS describes the model as compatible with many routers from other brands.
  • AiMesh router features won’t automatically be available with a different router. ASUS also notes regional restrictions on the use of 160 MHz.

devolo

According to devolo, the WiFi 6 Repeater 5400 Mesh Bundle offers multiple nodes that can also act as access points when network cables are available.

  • devolo explicitly lists wired access point mode.
  • An advertised maximum wireless data rate doesn’t guarantee a particular speed when sharing project files.

Wi-Fi extenders at Joybuy

These product options range from standalone wireless repeaters to wired access points and a set of two mesh nodes. The right choice depends on factors such as cabling, weak spots and compatibility with your existing router.

Ubiquiti UniFi AP U7 Long-Range

Ubiquiti UniFi AP U7 Long-Range

Suitable for a wired access point setup; check that you have compatible PoE+ power equipment (802.3at).

View at Joybuy
ASUS ZenWiFi BT8 (2-Pack), Tri-Band Wi-Fi 7 (802.11be)

ASUS ZenWiFi BT8 (2-Pack), Tri-Band Wi-Fi 7 (802.11be)

A set of two mesh nodes for extending coverage in more than one area; check that your existing router supports the AiMesh features you want.

View at Joybuy
TP-Link TL-WA850RE 300 Mbps Universal

TP-Link TL-WA850RE 300 Mbps Universal

For wireless extension in an area with weak coverage; check that the repeater can still receive a usable signal from the router where you plan to place it.

View at Joybuy
Wi-Fi Repeater Pro, black

Wi-Fi Repeater Pro, black

For wireless extension; check the connection at your chosen location, and that the setup suits your network and how you use it.

View at Joybuy
TP-Link Omada EAP653 access point, 2976 Mbit/s, Power over Ethernet

TP-Link Omada EAP653, 2976 Mbit/s, PoE

For a wired access point; check that you have the Ethernet connection and PoE power supply you need. The stated data rate isn’t a measured file transfer speed in your home.

View at Joybuy

Frequently asked questions

Should the repeater go on the floor with the weakest coverage?

Not if the repeater itself can barely connect to the router there. Compare the signal at possible intermediate locations; walls and ceilings can affect coverage and speed.

Will an extra Wi-Fi node automatically speed up project file transfers?

No, an extra Wi-Fi node doesn’t guarantee faster file transfers. The connection between Wi-Fi nodes and how your devices connect also play a part; a stated Wi-Fi speed is no guarantee of transfer speeds.

What maintenance does a Wi-Fi extender need?

Check whether firmware updates are available and use a strong Wi-Fi password with suitable encryption. The Consumers’ Association also lists energy consumption as something to consider for nodes that stay switched on for long periods.

Do you need a licence or registration for ordinary home Wi-Fi in the Netherlands?

According to the Netherlands Authority for Digital Infrastructure, Wi-Fi on the designated frequencies is licence-exempt and there’s no notification or registration requirement, provided the conditions of use are met. Radio equipment placed on the market in the Netherlands must also meet the applicable European requirements and carry the required CE marking.

Do I need to buy my Wi-Fi extender from my internet provider to get support?

Not necessarily. Before buying, check what help your provider offers for your existing router and what installation and update support comes with the product you choose.