First, measure the upload speed using an Ethernet cable connected to your router, then compare it with the result at your workspace. A Wi-Fi extender won’t fix a slow internet connection. If the connection is fast enough by the router but weak behind the thick walls, choose a wired access point or mesh node if you have cabling available. Without a cable, a repeater or wireless mesh is only likely to help where the additional node can still receive a good signal. If there’s no suitable spot between the router and your workspace, powerline is an alternative to test in the places you need it.
Who is this buying guide for?
Portfolio uploader with the option to run a cable
You send large files from a room behind thick walls and can use an Ethernet cable and Wi-Fi access point there. A wired connection between the access points avoids a wireless signal having to pass through the walls.
Portfolio uploader without a cable route
You can’t run an Ethernet cable, so you’re comparing a carefully positioned wireless access point with powerline using suitable sockets. The connection will depend on your home.
User with one weak-signal workspace
You mainly want to improve the connection in one room and can place a repeater somewhere the router’s signal is still strong. First, check that the wired upload speed through your router is fast enough.
What should you look for when buying?
Start with a diagnosis, then choose a solution: measure the speed over a wired connection first, then decide whether you can run a cable, find a suitable spot for a wireless node or use compatible sockets.
| Concern |
What to look for |
Who is it for? |
| Reliable uploads behind thick walls |
Check whether you can run a cable to the Wi-Fi access point and whether the device supports Ethernet backhaul or access point mode. |
If I want to send large portfolio files from my workspace, I need a reliable connection that doesn’t rely on a wireless signal passing through the walls. Around 36% of consumers prioritise reliable uploads at their workspace. |
| Identifying what’s slowing down uploads |
First measure the upload speed over a wired connection by the router, then compare it with the result at your workspace under similar conditions. |
I want to know whether my internet connection or Wi-Fi is limiting my upload speed before I buy anything. Around 29% of consumers prioritise identifying what’s slowing down uploads. |
| A connection without running a cable through the walls |
Check whether there’s a spot where a wireless access point can still receive a signal. If you’re considering powerline, also check the sockets and whether the kit includes a Wi-Fi adapter. |
Without a cable route, I want to bring Wi-Fi to my workspace without having to run a new Ethernet cable. Around 21% of consumers prioritise an installation that doesn’t require a cable. |
| A simple way to improve the connection in one workspace |
Check that your router supports a repeater and that you can place it somewhere with a strong enough signal. |
For one workspace, I don’t want a more elaborate setup than necessary, but the repeater still needs to stay connected to the router. Around 14% of consumers prioritise improving the connection in one room. |
Common buying mistakes
-
Buying a Wi-Fi extender before measuring the upload speed by the router
A wired speed test helps you tell the difference between a slow internet connection and a weak Wi-Fi signal. An additional access point won’t fix a slow wired upload speed.
First, measure the speed using an Ethernet cable connected to the router, then test again at your workspace. Compare the wired result with the speed your internet connection is supposed to provide.
-
Placing a wireless repeater behind the thickest wall
A repeater needs a usable connection to the router itself. The wall may weaken that signal too.
First, find a spot where the router’s signal is still strong. If there isn’t one, consider a wired connection or test powerline.
-
Assuming the stated Wi-Fi or powerline speed is the same as your actual upload speed
The upload speed at your workspace also depends on your internet connection and where you place the device. With powerline, sockets and electrical appliances can affect the connection.
Test the connection where you work, and treat product specifications as details of the device, not as a guarantee of the results you’ll get at home.
Brands worth considering
TP-Link
The Deco X50 is a mesh system to consider if you can run a wired connection between Wi-Fi nodes.
- TP-Link lists Wi-Fi 6, three gigabit ports per unit and optional Ethernet backhaul for the Deco X50.
- The stated top wireless speed and coverage don’t tell you what upload speed you’ll get at home behind the walls.
FRITZ!
The FRITZ!Repeater 1200 AX is a targeted way to extend your Wi-Fi. Consider it alongside your existing router and the places where you can position it.
- FRITZ! lists Wi-Fi 6, one gigabit LAN port and the option to connect via Wi-Fi or LAN.
- Integration with FRITZ! Mesh depends on having a compatible FRITZ!Box and the right configuration. If you place it wirelessly, performance still depends on the signal where the repeater is positioned.
devolo
The Magic 2 WiFi 6 next Starter Kit is a powerline option with Wi-Fi on the receiving adapter, for when there’s no cable route or suitable spot for a wireless node.
- devolo lists a starter kit with two adapters and Wi-Fi on the receiving adapter.
- According to devolo, some sockets and electrical appliances can affect the connection. The stated maximum speed doesn’t guarantee a particular upload speed in your home.
Joybuy products for extending Wi-Fi
These access points and mesh systems are for anyone looking to extend Wi-Fi to a workspace. Before you buy, check that the cabling, power supply and placement are suitable for your setup.
Image unavailable
Ubiquiti UniFi AP U7 Long-Range
A wired access point to consider if you can run an Ethernet cable to your workspace.
It requires compatible PoE+ (802.3at) equipment for power, and is managed through UniFi Network.
View at Joybuy
Image unavailable
TP-Link EAP725-Wall PoE access point
A wall-mounted access point to consider for extending a wired connection to your workspace.
The product name mentions PoE; check that your setup provides the power it needs.
View at Joybuy
Image unavailable
TP-Link Deco X50-PoE mesh system, 2-pack
A mesh system with two units to consider if you want to extend Wi-Fi to another room and can run cabling.
The product name mentions dual-band Wi-Fi 6 and PoE. Check what power supply and cabling you’ll need at the planned locations.
View at Joybuy
Image unavailable
TP-Link Deco XE75 Pro mesh system, 3-pack
A mesh system with three units to consider if you want to extend Wi-Fi to several rooms.
The product name mentions tri-band Wi-Fi 6E.
View at Joybuy
Image unavailable
TP-Link Deco X50 mesh system, 2-pack
A mesh system to consider if you want to extend Wi-Fi to another room and can run a cable between the units.
The product name mentions dual-band Wi-Fi 6. Ethernet backhaul is optional and requires an Ethernet connection between the Deco units.
View at Joybuy
Frequently asked questions
How can I tell if a Wi-Fi booster will help with uploading my portfolio?
First, measure the upload speed on a computer connected to your home network with an Ethernet cable, then compare it with the speed at your workspace. If the wired upload speed is consistently lower than your internet connection is supposed to provide, check your connection first or contact your provider.
Where should I place a wireless repeater?
Place the repeater somewhere it can still get a usable connection to the router, rather than automatically putting it in the room with the weakest signal. The best spot will depend on your walls and layout. After installation, check the upload speed at your workspace.
How do I connect Deco nodes using Ethernet backhaul?
TP-Link recommends setting up the Deco units on the same network using the app first, then connecting them with a cable. The satellite’s connection rules differ between router mode and access point mode, so check the connection in the app’s network map.
What can I do if powerline performance is disappointing?
devolo recommends plugging the adapters directly into wall sockets where possible and checking for potential sources of interference, such as certain power supplies or dimmer switches. Then test again at your intended workspace.
Does a two-year manufacturer’s warranty mean my rights end after that?
No. In the Netherlands, the statutory guarantee has no fixed time limit: with normal use, a purchase must meet the standard you can reasonably expect. The seller is responsible for providing an appropriate solution if the product turns out to be faulty.
Which statutory product requirements apply to a Wi-Fi device in the Netherlands?
Radio equipment placed on the EU market must meet the applicable European requirements. According to the Dutch Authority for Digital Infrastructure, the manufacturer affixes the CE mark when the product conforms; check the mark on the specific device. A CE logo or product description isn’t a performance test.