Who is this buying guide for?

Streamers with a Wi-Fi dead zone

If your documentary keeps buffering on the TV but the internet works closer to the router, check the signal strength where you watch. The Consumers' Association recommends placing a Wi-Fi extender where the router’s signal is still usable.

Viewers with limited shelf space

You don’t want another box beside the TV and are looking for a model that plugs into a socket and fits the space. The FRITZ!Repeater 1200 AX and devolo WiFi 6 Repeater 3000 are plug-in models.

TV viewers considering an Ethernet cable

You want to know whether you can connect the TV by cable or run a cable to an access point instead. TP-Link describes an access point mode for the RE705X that uses its Ethernet port.

What should you look for?

Wireless plug-in repeater

A good fit if: you want to improve the signal in one viewing area, have a suitable socket and the repeater can still receive a strong router signal there.

Trade-off: the device takes up space around the socket and can’t fix a weak signal where it is plugged in.

Wired access point

A good fit if: you can run an Ethernet cable to a suitable location and want to provide Wi-Fi there.

Trade-off: access point mode requires a cable to your existing network. An Ethernet port on a wirelessly positioned repeater doesn’t connect the repeater itself to the router by cable.

Mesh system with multiple Wi-Fi points

A good fit if: several rooms have coverage problems or you already use a compatible mesh system.

Trade-off: check compatibility with your router and allow for extra devices, sockets and space.

What to consider What should you check? Who is this important for?
Reliable streaming Test the connection at the TV and choose a repeater location where the router’s signal is still available. Netflix recommends 5 Mbps for Full HD and 15 Mbps for 4K UHD for its own service. If my documentary buffers where I watch, I want to know whether the connection is strong enough there; around 36% of consumers say a reliable stream is their top priority.
Space around the TV and socket Check the exact model’s dimensions and make sure it fits the socket without blocking nearby sockets. I want to keep the TV stand clear and have little space around the socket; around 29% of consumers prioritise a small footprint.
Cabling and network mode Work out where you can run an Ethernet cable and check whether the model has an Ethernet port, access point mode or both. If I want a wired connection to the TV or network, I need to know which part of the connection the cable reaches; around 21% of consumers prioritise a wired connection.
Features you need Compare the model’s Wi-Fi bands and connections with your router and TV, and consider whether you’ll actually use its extra features. For one viewing area, I don’t want to choose features I don’t need; around 14% of consumers say simplicity is their top priority.

Common buying mistakes

  • Putting the repeater behind the TV in a dead zone

    The signal the repeater receives from the router may already be too weak there, even if it’s right beside the TV.

    First, find a socket where the router’s signal is still usable, then test the connection where you watch.

  • Assuming the speed on the box is your streaming speed

    A stated Wi-Fi speed doesn’t tell you what internet speed you’ll actually get on your TV.

    Test the connection on your playback device and compare it with your streaming service’s requirements. Netflix recommends 5 Mbps for Full HD and 15 Mbps for 4K UHD for its own service.

  • Assuming an Ethernet port connects the repeater to the router by cable

    If the repeater is connected to the router wirelessly, that connection remains wireless, even if you connect the TV to the repeater with a cable.

    Work out where the cable will run first and check that the mode you choose suits your setup.

    Access point mode may require an Ethernet cable to your existing network.

Brands to compare

FRITZ!

The FRITZ!Repeater 1200 AX is a plug-in model for anyone looking for Wi-Fi 6, an Ethernet port and an extension to an existing FRITZ! mesh network.

  • The manufacturer lists one Gigabit LAN port and a five-year manufacturer’s warranty.
  • The automatic mesh integration described is for FRITZ! devices. Don’t assume the same mesh features will be available with a different router.

TP-Link

The RE705X is a dual-band Wi-Fi 6 repeater with an Ethernet port and access point mode, making it an option for locations where a wired network solution is also relevant.

  • TP-Link lists theoretical band speeds of 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz.
  • These figures aren’t guaranteed streaming speeds. The OneMesh feature described requires a compatible OneMesh router.

devolo

The WiFi 6 Repeater 3000 is a plug-in model with Wi-Fi 6 and an Ethernet port; the manufacturer also describes an access point mode.

  • devolo lists a Gigabit LAN connection and a three-year manufacturer’s warranty, with an extension available subject to the manufacturer’s terms.
  • The mesh description refers to working with other devolo Wi-Fi products. An advertised data rate isn’t a measurement of performance in your home.

Xiaomi

The Mi Wi-Fi Range Extender Pro R03 is a compact repeater for one location if you don’t need a 5 GHz band or an Ethernet port.

  • For the R03, Xiaomi lists only 2.4 GHz, a signal rate of up to 300 Mbps and dimensions of 80 × 54 × 70 mm.
  • Check that the single listed band suits your router and streaming needs. The stated figures don’t measure the connection where you watch.

Products on Joybuy

This selection includes plug-in repeaters, wired access points and a mesh set with multiple units. Choose according to the space available, the cable route and the number of areas where you need Wi-Fi. For the specific product, check that the CE marking is present. The Dutch Authority for Digital Infrastructure says that equipment sold in the Netherlands must meet the applicable requirements.

TP-Link Omada EAP673-Extender Network Repeater in white

TP-Link Omada EAP673-Extender Network Repeater, white

Could be suitable if you’re looking for a dual-band repeater with an Ethernet port; check the connection where you plan to install it.

Product information lists dual-band 2.4/5 GHz, Wi-Fi 6, external antennas and an Ethernet port. The title lists 10/100/1000 Mbit/s; the stated dimensions are 160 × 80 × 37,8 mm.

View on Joybuy
TP-Link EAP725-Wall access point in white with PoE

TP-Link EAP725-Wall, 5012 Mbit/s, white, PoE

Suited to a fixed location for a wired, powered access point, rather than anyone looking for a wireless plug-in repeater.

Product information lists dual-band Wi-Fi, three Ethernet ports including 2,5G, PoE and wall or ceiling mounting. Installation requires a suitable wired PoE setup.

View on Joybuy
TP-Link Deco BE68 mesh set with two units

TP-Link Deco BE68, 2-pack

Could be suitable if you need several Wi-Fi points and have space to place two mesh units.

Product information lists a Wi-Fi 7 mesh system with tri-band Wi-Fi and Ethernet ports on each unit. Multiple points require extra space.

View on Joybuy
Xiaomi Mi Wi-Fi Range Extender Pro R03 in black

Xiaomi Mi Wi-Fi Range Extender Pro R03, black

Could suit one location where you want to extend Wi-Fi without taking up extra shelf space, provided 2.4 GHz works with your network.

According to Xiaomi, this plug-in model uses 2.4 GHz and measures 80 × 54 × 70 mm. Its stated signal rate is up to 300 Mbps; no 5 GHz band is listed.

View on Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N, 300 Mbps, 2 antennas, WPS, Passive PoE

Could be suitable if you’re looking for a wired access point or extender and the stated PoE setup works with your configuration.

Product information lists 2.4 GHz, two external antennas, 300 Mbps, Passive PoE and range extender, access point and client modes. No 5 GHz band is listed.

View on Joybuy

Frequently asked questions

Does a Wi-Fi repeater need to be right next to the TV?

No. Place a wireless repeater where it can still receive a strong enough signal from the router, then test the connection by the TV. A signal light or placement app can help you find a suitable spot.

What speed do you need to stream a documentary in 4K?

Netflix recommends a stable connection of at least 15 Mbps for 4K UHD and 5 Mbps for Full HD on its own service. Test the connection on your playback device. These recommendations don’t guarantee a repeater’s performance and don’t automatically apply to every streaming service.

What’s the difference between an access point and a repeater with an Ethernet port?

An access point uses an Ethernet cable to connect to your existing network and provide Wi-Fi at that location. If a repeater is connected wirelessly, its connection to the router remains wireless, even if you connect the TV to the repeater with an Ethernet cable.

What should you do to secure your Wi-Fi after installation?

Keep your router and Wi-Fi devices up to date, and use strong network security with a hard-to-guess password. The Consumers' Association also recommends turning off WPS once you no longer need it for installation.

Does my statutory guarantee end when the manufacturer’s warranty expires?

No. According to ACM ConsuWijzer, your statutory rights are separate from the seller’s or manufacturer’s warranty. What you can expect from a product depends, among other things, on normal use. If the product doesn’t meet those expectations, contact the seller.