Who is this relevant to?

Home workers with a Wi-Fi dead zone

You make backups from a workspace on a different floor from the router and want to find out exactly where the signal is falling short. The Consumentenbond describes placing extenders where you want to improve the signal.

Home workers transferring large files

You already have Wi-Fi at your workspace, but want to know whether the connection between floors is good enough for regular file transfers. The Consumentenbond explains that Wi-Fi extenders are tested over both Wi-Fi and a cable connection.

Home workers with an existing router or mesh system

You want to extend your network in a targeted way and check that the features you need work with your router. Mesh features specific to a brand are not automatically compatible across different systems.

What should you look for when choosing?

One wireless repeater

Suitable when: just one workspace has poor reception and you can place the repeater where it gets a usable signal from the router.

Bear in mind: the connection still depends on the wireless link between the repeater and the router.

Several wireless mesh points

Suitable when: coverage is poor across several floors and there is no suitable cabling available.

Bear in mind: you’ll need more points, and the connection between them must also be good enough. The Consumentenbond says three points are an option for a three-storey home, but recommends starting with two in many homes and adding more if needed.

Wired access point or mesh with Ethernet backhaul

Suitable when: there is a usable network cable to the floor where you need Wi-Fi.

Bear in mind: check whether the exact model’s Ethernet port supports access point mode or wired backhaul; these are different features.

When it comes to work backups in a three-storey home, your choice mainly depends on reception at your workspace, the connection between Wi-Fi points and whether you can keep your existing router.

What to consider What to check before buying Who is this important for?
Coverage across three floors Check reception at every backup location and at potential spots for a Wi-Fi point. See whether you can add to a mesh kit later. If I work on several floors, I want to know where a point can still receive a strong enough signal. Around 31% of consumers give coverage across multiple floors their highest priority.
Transferring documents Check the connection between the points and assess the transfer at your workspace; the stated radio speed is not the measured backup speed at that location. If I regularly transfer work files, I want the connection to remain usable at my workspace. Around 25% of consumers prioritise stable file transfers.
Keeping your existing router Check the exact router model and the requirements for the mesh feature you want to use. If I want to keep my current router, I first check which extension features work with it. Around 19% of consumers give keeping their existing router their highest priority.
Secure working practices Check which backup destination and equipment your organisation specifies, and assess the network security settings separately. If I handle sensitive work documents, I want to keep using the agreed secure working environment. Around 25% of consumers prioritise secure working practices.

Common pitfalls

  • Assuming the maximum Wi-Fi speed is your backup speed

    A product specification does not automatically tell you how fast transfers will be in the loft. The connection between Wi-Fi points and reception at your workspace also play a part.

    Compare the setup and check transfers where you work, not just next to the router.

  • Placing a repeater where there is almost no signal

    A wireless repeater relays the connection it receives from the router. If there is barely any reception where you place it, the connection to the router may remain the weakest link.

    Check reception at possible midway locations. If there is no suitable spot for a wireless repeater, consider a wired access point.

  • Assuming every mesh device works with every router

    Brand-specific features have their own router requirements. TP-Link OneMesh requires a OneMesh router; ASUS AiMesh requires a compatible ASUS router.

    Check the exact router model and the feature you want before choosing an extension.

  • Confusing better Wi-Fi with a secure backup

    Network coverage does not determine where work documents are stored or who can access them. The Autoriteit Persoonsgegevens advises using a secure home-working environment and protecting documents.

    Follow your organisation’s procedures for a secure working and backup environment, and assess your Wi-Fi purchase separately.

Relevant brands for extending your Wi-Fi

TP-Link

The RE705X is worth considering for targeted coverage; the Deco X50 is an option for an expandable setup with multiple Wi-Fi points.

  • TP-Link Netherlands lists a gigabit port and access point mode for the RE705X. The Deco X50 supports optional Ethernet backhaul.
  • OneMesh requires a OneMesh router. Stated wireless speeds and coverage areas are manufacturer figures, not measurements in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering for extending an existing FRITZ! setup and, according to the manufacturer, can also be used as a repeater with another router.

  • FRITZ! lists three frequency bands, two gigabit LAN ports and a five-year warranty for this model.
  • FRITZ! mesh features require a suitable FRITZ! setup. The stated specifications do not show how fast the connection between floors will be.

ASUS

The RP-AX58 is worth considering as a standalone extender or wired access point; AiMesh is mainly relevant if you have a compatible ASUS router.

  • ASUS lists repeater, access point and AiMesh modes for the RP-AX58.
  • AiMesh requires a compatible router. Check that the feature you want to use works with your router.

devolo

The WiFi 6 Repeater 5400 is designed to extend an existing router’s coverage; the manufacturer also offers a bundle with multiple Wi-Fi points.

  • According to devolo, the standalone repeater works with Wi-Fi routers from different brands. Compatible devices can also be used as access points.
  • The maximum data rate listed on the product page is a manufacturer figure, not a guaranteed speed for work backups.

NETGEAR

The EAX12 is an option for extending an existing Wi-Fi router with a standalone Wi-Fi 6 extender.

  • NETGEAR lists a gigabit Ethernet port for the EAX12 and says it works with existing Wi-Fi.
  • The available information does not say whether one unit will provide coverage across all three floors of your home.

Wi-Fi products at Joybuy

This selection includes mesh kits with three units, a standalone Wi-Fi repeater and a wired access point. Choose based on where you need Wi-Fi and whether a network cable is available.

TP-Link Deco E4 mesh kit with three units

TP-Link Deco E4 (3-pack)

A mesh kit with three units is an option if you want to extend Wi-Fi coverage across several floors.

Dual-band Wi-Fi 5 (802.11ac), 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link Deco M4 mesh kit with three units

TP-Link Deco M4 (3-pack)

This mesh kit with three stations is an option if you want to extend coverage to several areas of your home.

Dual-band Wi-Fi 5 (802.11ac), 2.4 GHz and 5 GHz.

The product description mentions app-guided placement of the stations.

View at Joybuy
TP-Link Deco X50 mesh kit with three units

TP-Link Deco X50 (3-pack)

This mesh kit is an option for extending coverage with multiple Wi-Fi points; the product information also mentions optional Ethernet backhaul.

Dual-band Wi-Fi 6 (802.11ax), 2.4 GHz and 5 GHz.

View at Joybuy
Wifi Repeater Pro Black

Wifi Repeater Pro Black

A standalone repeater is an option if just one workspace has a weak Wi-Fi signal and the device itself can receive a strong enough signal from the router.

The product description says it works with an existing wireless network and can be set up using the Mi app.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

A wired access point is an option if there is a network cable to the floor where your workspace is.

The product name lists 2.976 Mbit/s and Power over Ethernet (PoE).

View at Joybuy

Frequently asked questions

Do you need three Wi-Fi points in a three-storey home?

No, the number of points you need depends on reception at your workspaces and the connection between the points. The Consumentenbond says three points are an option for a three-storey home, but also says that two are a good starting point for many homes, with more added if needed.

Does a Wi-Fi extender work with every router?

Check basic repeater use and brand-specific mesh features separately. For OneMesh with the RE705X, TP-Link specifies a OneMesh router; ASUS requires an AiMesh-compatible router for AiMesh with the RP-AX58.

Does a Wi-Fi extender back up my work documents?

No, an extender extends your network connection but does not manage file storage or backups. For sensitive work documents, follow your organisation’s secure working and storage procedures; the Autoriteit Persoonsgegevens advises protecting these documents properly.

Where should I place a wireless repeater?

Place the repeater somewhere it can still receive a usable connection from the router, not where the signal has almost disappeared. Then check the connection at the workspace where you make backups.

What product requirements apply to Wi-Fi equipment sold in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur (RDI), retailers may only sell equipment that meets the applicable requirements; CE marking is one of them. Since 1 August 2025, additional cybersecurity requirements have also applied to radio equipment covered by those rules. Check that the specific device complies; a statement on a web page does not automatically confirm the marking on the item you receive.