Which solution is right for you?

One floor with weak reception

You mainly want to download an audiobook on one upper floor. Start by placing a wireless extender somewhere it can still get a usable connection to the router. The Consumentenbond recommends placing Wi-Fi nodes with as few obstacles between them as possible.

Weak Wi-Fi between floors

If the connection between the router and an additional node is unreliable, a different way of linking them may work better than adding another wireless node. Compare Ethernet with powerline, and bear in mind that results depend on the sockets you use.

Several floors with weak reception

You want coverage on more than one floor, so it’s worth comparing mesh nodes. Where you place them and how they connect will help determine whether this approach suits your home.

What should you look for?

One wireless Wi-Fi extender

Choose this option: if reception is poor in one spot and the extender can still connect to the router.

Bear in mind: the wireless connection back to the router remains the key factor.

Multiple mesh Wi-Fi nodes

Choose this option: if you want coverage across several floors and can place the nodes effectively.

Bear in mind: you’ll need multiple nodes, and mesh alone doesn’t guarantee good coverage in every home.

Wired access point

Choose this option: if there’s an Ethernet connection to the floor with poor reception, or you can install one.

Bear in mind: installation requires a cable run and an access point or a device with access point mode.

Powerline with Wi-Fi

Choose this option: if running a network cable isn’t practical and you can test the connection over your electrical wiring.

Bear in mind: performance can vary from one socket to another, and nearby electrical appliances may cause interference.

What to consider What to look for when buying Who is this important for?
Signal where you download Check where the router, extender and audiobook listening spot are, then test reception at that spot. If I only want to download an audiobook upstairs, I need to know whether the signal reaches that spot. Around 36% of consumers prioritise reception in one download location.
Connection between floors Compare an available Ethernet connection with powerline; test powerline using the sockets you plan to use. If Wi-Fi drops out between floors, I’m mainly looking for a reliable connection to the extra node. Around 29% of consumers prioritise this connection.
Several weak spots Work out how many places need coverage and where mesh nodes could go; check whether Ethernet between nodes is an option. If several rooms or floors have weak reception, I want to improve coverage in all of them. Around 21% of consumers prioritise coverage in multiple locations.
Installation and management Check the installation app, compatibility with any mesh features and the options for security updates. If I’m setting up and maintaining the equipment myself, I want to know how it works and whether its features suit my router. Around 14% of consumers consider ease of installation and management the most important factor.

What to watch out for when buying

  • Focusing only on the advertised speed

    A stated Wi-Fi speed doesn’t tell you whether the connection will be usable on the top floor. The Consumentenbond assesses Wi-Fi extenders at different distances and across different floors, among other things.

    Work out where the router’s signal starts to weaken, then decide how the extra node will connect to the router. After that, test reception where you plan to download your audiobook.

    If the connection you choose between floors isn’t good enough, you may still need another node or cabling.

  • Assuming every extender creates a mesh with every router

    Features such as OneMesh and AiMesh depend on the specific combination of devices. Standard extender functionality isn’t the same as support for these mesh features.

    Check the exact router and extender models, and look at standard repeater functionality separately from specific mesh features.

    If you need a particular mesh feature, you may have to upgrade or replace other network equipment.

  • Assuming a powerline starter kit will cover multiple floors

    A starter kit may contain different items from a set with multiple Wi-Fi adapters. Performance can also vary between sockets.

    Check which adapters are included in the exact set, then test the connection on every floor where you want to use Wi-Fi.

    You may need an extra Wi-Fi adapter to get coverage in more places.

Brands to compare

TP-Link

TP-Link offers both standalone Wi-Fi extenders and Deco mesh systems. They’re different solutions, so compare them separately.

  • According to TP-Link, the RE705X has an access point mode via a gigabit Ethernet port. TP-Link says the Deco X50 supports an optional Ethernet connection between Deco units.
  • OneMesh depends on the specific mesh combination. These features alone don’t tell you what coverage you’ll get in a three-storey home.

ASUS

The RP-AX58 is a standalone Wi-Fi extender for an existing router. AiMesh is an additional option when used with a compatible ASUS router.

  • ASUS says the RP-AX58 can work with various other Wi-Fi routers and supports access point mode.
  • The specific AiMesh features require an AiMesh-compatible router. Manufacturer claims about speed or coverage can’t predict how well the signal will travel through the floors of an individual home.

devolo

Devolo Magic powerline kits combine data transfer over electrical wiring with Wi-Fi.

  • According to devolo, the Magic 2 WiFi 6 next is available as both a starter kit and a set with multiple adapters.
  • Performance may be low with some sockets, and nearby electrical appliances can cause interference. Check which adapters are included in the kit you choose.

NETGEAR

NETGEAR describes the EAX15 as a standalone Wi-Fi 6 mesh extender for an existing router.

  • NETGEAR lists a gigabit Ethernet port and app-based setup.
  • The stated speed and coverage claims can’t predict how well the connection will perform in a specific multi-storey home.

Products for different Wi-Fi solutions

This selection includes mesh nodes for multiple locations, powerline with Wi-Fi, a wireless extender and an access point for an Ethernet connection.

TP-Link Deco E4 (3-pack) dual-band mesh system

TP-Link Deco E4 (3-pack)

A set of three mesh units is an option if you want to build coverage in several parts of your home.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).

Check where you can place the units and whether the connection between them remains strong on the floors where you need it.

Joybuy
TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT

Powerline with Wi-Fi is worth considering if a wireless connection between floors isn’t reliable and running Ethernet isn’t practical.

Starter kit with powerline adapter.

Performance can vary between sockets. Test the connection where you plan to use Wi-Fi, and check what’s included in the set.

Joybuy
WiFi Repeater Pro Black Wi-Fi extender

WiFi Repeater Pro Black

A wireless extender may suit you if reception is poor where you want to download your audiobook, but the extender itself can still get a strong enough connection to the router.

Test reception at a midway point before deciding where to place the extender permanently.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

This access point option is suitable if an Ethernet connection is available on the floor with poor reception.

Wi-Fi N up to 300 Mbps; 2 antennas; WPS; Passive PoE.

To use it as an access point, you’ll need an Ethernet connection to its location.

Joybuy

Frequently asked questions

Where should I put a wireless Wi-Fi extender?

Place it somewhere it can still receive the existing Wi-Fi signal well, rather than in the room where there’s no reception. The Consumentenbond recommends having as few obstacles as possible between Wi-Fi nodes. Then test the connection where you want to download your audiobook.

Does my current router need to be the same brand?

Not always for standard wireless extension: TP-Link says the RE705X can work with Wi-Fi routers, and ASUS says the RP-AX58 works with various other routers. For OneMesh or AiMesh features, however, check that the specific devices are compatible.

What can I do if powerline doesn’t work well upstairs?

Test the adapters in the wall sockets you plan to use. Devolo lists certain sockets and nearby electrical appliances as factors that can affect performance, so test the connection at the spot where you intend to use it.

Do I need a licence for home Wi-Fi in the Netherlands?

No. Home Wi-Fi on the designated frequencies and in accordance with the terms of use is licence-free. The Dutch Authority for Digital Infrastructure also states that no notification or registration is required. This doesn’t affect the product requirements for the equipment.

What should I check about the version I’m buying?

Check that the exact version you’re buying carries the correct CE marking. The Dutch Authority for Digital Infrastructure states that equipment placed on the European market must meet the relevant requirements. A declaration for a different regional version doesn’t prove that the product you’ve chosen meets them.