If you can run a network cable to your workspace, a wired access point or an extender in access point mode is a sensible option: the connection back to your router won’t have to pass wirelessly through the wall. For one room with a weak signal, a wireless repeater may work if there’s still a usable router signal somewhere between the router and the room. For several rooms, you could consider mesh, while powerline is another option to try in your own home. Before buying, check router compatibility, the connection at your workspace and whether the exact model meets the applicable product requirements.
Who is this guide for?
Sharing large project files
You work with files on a computer or network drive behind thick walls and want a reliable connection at your workspace above all. Running a network cable may be an option. This reflects the points highlighted by TP-Link and the Dutch Consumers’ Association.
Working in one room with a weak signal
You don’t have enough Wi-Fi at one workspace and want to keep using your existing router. With a wireless repeater, the signal at a point between the router and your workspace matters, as TP-Link explains.
Using several rooms
You want a connection in more than one workspace or on more than one floor. So don’t just consider coverage from each unit: also check the connection between the units and compatibility with your router.
What factors should guide your choice?
Wired access point
Choose this if: you can run a network cable to your workspace or use an existing network socket.
Bear in mind: running a cable takes effort, and an Ethernet port alone doesn’t prove that a device can work as an access point.
Wireless repeater
Choose this if: you want to reach one workspace with a weak signal and there’s still a good router signal at a point in between.
Bear in mind: thick walls can also weaken the wireless connection to the repeater.
Mesh with multiple units
Choose this if: you need coverage in several rooms or on different floors.
Bear in mind: check that it works with your router; adding more units won’t automatically fix a poor connection between them.
Powerline kit
Choose this if: running a network cable is difficult and the wireless route through the walls doesn’t seem good enough.
Bear in mind: performance depends on your electrical wiring; advertised speeds don’t guarantee file-transfer performance in your home.
TP-Link recommends placing a wireless repeater where it can still receive a good signal from the router. The Dutch Consumers’ Association points out that the Wi-Fi version alone doesn’t tell you how well a device will perform.
| Factor to consider |
What to look for |
Who it matters to |
| Transferring large files |
See whether you can run a cable; with an extender, check both the Ethernet port and access point mode. |
If I share large project files through thick walls, I want a reliable connection to my workspace above all. Around 36% of consumers in this context prioritise file transfers. |
| Reception in one workspace |
Check the router signal at a possible midway point, then test the connection in your workspace. |
If I have one room with weak Wi-Fi, I want to know whether the existing router can still reach the repeater’s location. Around 29% of consumers have that one workspace as their main consideration. |
| Coverage in several rooms |
Count the rooms you need to cover, then check router compatibility and whether you can use a wired connection between the units. |
If several rooms or floors need a connection, I want to know that the units can work together too. Around 21% of consumers prioritise this kind of coverage. |
| No network cable to the workspace |
Check that the powerline kit is complete, what connections the adapter at your workspace has and whether your wiring is suitable. |
If I can’t run a network cable, I look for another way to connect through my home. Around 14% of consumers prioritise this limitation. |
Avoid common buying mistakes
-
Putting a repeater where the Wi-Fi already drops out
A wireless repeater first needs to receive the signal from your router. So a weak signal in the room you want to cover doesn’t mean the repeater will work well there.
Check for a midway spot where the router signal is still usable, then test the connection at your workspace.
-
Assuming the speed on the box is your file-transfer speed
Advertised wireless link speeds and powerline speeds don’t guarantee data-transfer performance in your home. With powerline, your electrical wiring also affects performance.
Assess the connection where you use your files rather than relying on an advertised figure alone.
-
Assuming every repeater will work with your existing mesh system
OneMesh, AiMesh and FRITZ! mesh integration each have their own compatibility requirements. Basic Wi-Fi extension isn’t the same as integration with a brand-specific mesh system.
Check that your exact router supports the system you want. You may need a different router for certain mesh features.
-
Mistaking a standalone powerline adapter for a complete starter kit
You need adapters at both ends of the route to connect over your mains wiring. The adapter at your workspace must also have the connections you need there.
Before buying, check what’s included in the kit and whether the adapter at your workspace has Wi-Fi and the Ethernet ports you need.
Brands to compare
TP-Link
The RE605X and RE705X models mentioned combine wireless extension with access point mode; TP-Link also offers powerline kits.
- According to TP-Link, the RE605X has an Ethernet port and access point mode.
- OneMesh on the RE605X requires a compatible OneMesh router. Advertised wireless speeds aren’t the same as measured file-transfer speeds through walls.
FRITZ!
According to FRITZ!, the FRITZ!Repeater 1200 AX has a gigabit LAN port and can be used as a LAN bridge.
- The manufacturer describes both wired extension and integration with FRITZ! mesh.
- A compatible FRITZ!Box is relevant for integrated mesh. If you have a different router, check the setup instructions and whether the version on offer suits your needs.
devolo
The Magic 2 WiFi next Starter Kit is a powerline option with Wi-Fi and two gigabit LAN ports on the Wi-Fi adapter described.
- The kit may be useful if you’re looking for a connection through your mains wiring and Wi-Fi at your workspace.
- According to devolo, Magic adapters don’t work with the older dLAN range. Your electrical wiring also affects performance.
ASUS
According to ASUS, the RP-AX58 is a repeater that can also work as an access point.
- Access point mode gives you the option to extend Wi-Fi over a wired network connection.
- AiMesh features are designed for compatible ASUS routers; check the feature you want and the router combination.
NETGEAR
According to the Dutch manufacturer’s product page, the EAX15 is a Wi-Fi 6 mesh extender with a gigabit Ethernet port.
- The Ethernet port gives you a wired connection option at the extender.
- The advertised speed of up to 1,8 Gbit/s is a manufacturer’s claim, not a measurement of file transfers through thick walls.
Joybuy products for this network setup
These products include a wired access point, mesh options for several rooms and a powerline kit for a network connection over your mains wiring. Before buying, check that the exact version, connections and compatibility suit your needs; the Dutch Authority for Digital Infrastructure explains the product requirements that apply to wireless equipment.
No image available
Ubiquiti UniFi AP U7 Long-Range
A wired access point for a workspace where you want to provide Wi-Fi over a network cable.
Wi-Fi 7; 2.5 Gigabit Ethernet port; PoE+ power supply. The description mentions management through the UniFi Network platform and a compatible PoE+ power supply.
Joybuy
No image available
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White
A mesh option if you want to extend Wi-Fi to several areas and can use a wired connection between mesh units.
Dual-band Wi-Fi 7; wired backhaul option. The product description lists one mesh node included; you may need an additional compatible unit for coverage across several areas.
Joybuy
No image available
TP-Link TL-WPA7517 KIT Powerline Starter Kit
A powerline starter kit with Wi-Fi for a workspace where running a network cable is difficult and the wireless connection through the walls isn’t strong enough.
Powerline and Wi-Fi; the product description lists a Type E plug and PLC, Wi-Fi and LAN indicators. Performance depends on your electrical wiring.
Joybuy
No image available
TP-Link Deco X50 3-pack Dual-Band Wi-Fi 6
A mesh set with three units to extend coverage to several areas of your home.
Dual-band Wi-Fi 6; three Gigabit Ethernet ports per unit, according to the product description.
Joybuy
No image available
TP-Link Omada EAP653 Wireless Access Point
A Wi-Fi access point for a wired network connection to a workspace.
Wi-Fi 6; Gigabit Ethernet port; PoE. The product description mentions ceiling or wall mounting and web management.
Joybuy
Frequently asked questions
Where should you place a wireless repeater?
Place it between the router and your workspace, somewhere it can still receive a good router signal. Check the signal indicator, then test the connection at your workspace; relying only on the weak signal in the room you want to cover isn’t enough.
Can an extender with an Ethernet port also work as a wired access point?
Only if that specific model supports access point mode. TP-Link describes this mode for the RE605X; a cable connects the extender to your existing network.
Which checks and updates matter when you share work files?
After installation, check that your devices can access the shared files and install any available security updates. The Dutch Authority for Digital Infrastructure also recommends using strong, unique passwords; this is general advice, not an assessment of a specific model.
What product requirements apply to a Wi-Fi booster?
Radio equipment sold in the Netherlands must meet the applicable European product requirements and carry the CE marking. According to the Dutch Authority for Digital Infrastructure, wireless equipment placed on the EU market from 1 August 2025 must also meet strengthened digital security requirements. Check the specific version, not just the model name.
What does a manufacturer’s warranty mean if the device breaks?
For a consumer purchase, a stated manufacturer’s warranty is separate from the statutory guarantee under Dutch law. ACM ConsuWijzer explains that the seller must offer an appropriate solution if a product breaks sooner than you could reasonably expect under normal use; the statutory guarantee doesn’t automatically have a fixed limit of two years.