Workshop attendee in a room at the back of the house
You want to make video calls from one fixed spot behind thick walls. First, find out where a wireless extender can still get a signal.
Start by working out how the connection will reach your workshop room. An access point connected by Ethernet may be suitable if you can run a cable through the thick wall, while a wireless repeater or mesh node still needs a strong enough signal from the router. Also check compatibility with your router and the signal strength where you’ll be sitting. A higher advertised Wi-Fi speed doesn’t guarantee uninterrupted video calls.
You want to make video calls from one fixed spot behind thick walls. First, find out where a wireless extender can still get a signal.
You can connect the room by cable and are looking for a Wi-Fi point that can work there as an access point.
You want to improve coverage in more than one place, so you’ll need to check which mesh extensions work with your router and other Wi-Fi points.
A good fit if: you want to reach one room, don’t have a cable and can find a spot with a strong enough signal between the router and the room.
Bear in mind: the wireless connection to the router will still depend on where you place the repeater and the walls in between.
A good fit if: you want to reach several rooms and the selected nodes can form a supported mesh system with your router or with each other.
Bear in mind: mesh doesn’t remove the need for a usable connection between nodes. Also check compatibility with features specific to the brand.
A good fit if: you can run an Ethernet cable beyond the wall that’s causing interference, especially if the router signal is weak there.
Bear in mind: you’ll need a cable to the spot you want to cover, and the device must have a suitable access point or LAN bridge mode.
First decide how the network will reach the workshop room. Then compare router compatibility and the features you actually need.
| Concern | What to look for when buying | Who is this important to? |
|---|---|---|
| Signal in the workshop | Test the signal where you’ll be sitting and use an indicator or placement guide to check that the repeater can still pick up the router’s signal from your chosen spot. | If I sit in one fixed spot during the workshop, I want a signal there, even if the repeater isn’t next to my desk. Around 33% of consumers prioritise signal in the workshop. |
| A connection beyond the wall | Check whether there’s an Ethernet connection to the room and whether the model has access point or LAN bridge mode. | When the wall blocks the wireless connection, I want to be able to run a cable into the room for a Wi-Fi point. Around 33% of consumers also prioritise a wired connection beyond the wall. |
| Working with your router | Make a note of your router model and check which mesh features and setup modes work with it. | I want to keep using my current router and only rely on mesh features if the combination is supported. Around 17% of consumers prioritise compatibility with their existing network. |
| Costs and maintenance | Work out how many Wi-Fi points you need, and check power consumption and the terms of service and warranty. | If I want to improve coverage in one workshop room, I don’t want to choose points or features I don’t need. Around 17% of consumers prioritise costs and maintenance. |
A wireless extender still needs to connect to the router. So a socket in the problem room isn’t automatically the right place for it.
Check the signal where you plan to put it, then test coverage from the workshop table.
If that spot doesn’t work, you may still need another node or cabling.
A port for a connected laptop and a wired connection from the Wi-Fi point to the router are two different things.
Before running a cable, check whether the device has access point or LAN bridge mode.
Choosing the wrong device could mean extra installation work or having to replace it.
Placement, walls and the connection between nodes all matter. A Wi-Fi generation or maximum speed alone won’t tell you how well the connection will work where you sit.
First choose a connection route that will work, then compare the specifications of the exact model.
In the Netherlands, your statutory guarantee isn’t simply the same as the length of the manufacturer’s warranty. What you can reasonably expect from the product also matters.
Keep your purchase and product details, and contact the seller if the product is faulty. ACM ConsuWijzer explains that the seller must resolve a fault covered by the statutory guarantee free of charge.
An extra warranty may be unnecessary if it leads you to think your statutory rights work differently.
TP-Link says the RE605X has Wi-Fi 6, Gigabit Ethernet, access point mode and a signal indicator. OneMesh is designed to work with a compatible TP-Link OneMesh router.
FRITZ! says the FRITZ!Repeater 1200 AX offers Wi-Fi 6, Gigabit LAN and mesh compatibility with a FRITZ!Box. It can also be used with a router from another brand as a regular repeater or via LAN.
According to devolo, the WiFi 6 Repeater 3000 has repeater mode, Gigabit LAN and access point mode. Mesh is described for use with other devolo Wi-Fi products.
NETGEAR says the EAX15 is a standalone dual-band Wi-Fi 6 extender with Gigabit Ethernet and support for using your existing network name.
ASUS says the RP-AX58 has Wi-Fi 6 and access point mode. AiMesh features require a compatible ASUS router.
The Joybuy products below include mesh kits and mesh routers for using multiple Wi-Fi points, plus an access point for a wired connection. Before buying, check that the connection type suits your router and that the specific version has the required CE marking.
No image available
A mesh kit with three units to spread Wi-Fi points across several rooms.
No image available
A ZenWiFi mesh system to extend Wi-Fi to several areas. Check which connection type your home needs.
No image available
A mesh kit with three units to extend Wi-Fi across several rooms.
No image available
A mesh router. The product information says mesh functionality requires multiple units, so one unit alone doesn’t confirm mesh coverage.
No image available
An access point for a wired Wi-Fi connection to the workshop room. Check that your network and setup support the connection.
Don’t automatically put it in the room with the weakest signal. Choose a spot where it can still get a strong signal from the router. Then check coverage where you’ll be working; a placement light or app can help you find a suitable position.
No. A connected laptop may still communicate wirelessly with the router via the repeater. If you want to avoid a wireless backhaul through the wall, check whether the device has access point or LAN bridge mode and whether you can run a cable to the router.
Compare the power consumption of the Wi-Fi points you actually need. The annual cost will depend on how long you use them and your electricity tariff. A manufacturer’s warranty doesn’t replace your statutory rights in the Netherlands: according to ACM ConsuWijzer, the seller is the point of contact if a product doesn’t meet what you could reasonably expect.
According to the Dutch Authority for Digital Infrastructure, licence-exempt Wi-Fi use doesn’t require notification or registration, provided the conditions for using that frequency are met. Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry a CE marking. Check the marking on the specific version.