Who is this guide for?

Viewer with one poorly covered home office

You can stream elsewhere at home, but want to improve coverage where your computer or screen is. The Dutch Consumers’ Association (Consumentenbond) covers placement and reception in its advice on Wi-Fi extenders.

Viewer trying to track down interruptions

You want to find out whether the interruptions are caused by the connection in your home office before buying an extender. Overstappen.nl describes poor internet in a room as a source of frustration; the requirements set by a streaming service apply to that service alone.

Viewer with Ethernet or several poorly covered rooms

You may be able to run Ethernet or need coverage in several places, so you’re comparing an access point with a mesh solution. The Consumentenbond covers Wi-Fi access points and coverage; FRITZ! also describes a LAN connection for use as an access point.

What should you look for in Wi-Fi for recording a theatre performance?

First, test the connection on the device you use to watch and compare it with a test near the router. Then consider whether a wireless repeater, Ethernet cable, mesh system or powerline adapter suits the layout of your home.

What to consider What to look for when buying Who is this important for?
Coverage where you watch Compare the connection by the router and in your home office. Find a spot between the two where the repeater can still receive a usable signal, and check its signal indicator or setup app. If the Wi-Fi signal is weak by my computer or screen, I want to know where a repeater can still connect reliably to the router. Around 36% of consumers give coverage where they watch top priority.
Cause of interruptions Test on the playback device and check the requirements of the service hosting the recording. Netflix recommends 5 Mbps for 1080p and 15 Mbps for 4K on its own service; these figures don’t automatically apply to other services. I want to find out whether the interruptions are caused by Wi-Fi, my internet connection, the device or the service before buying anything. Around 29% of consumers prioritise finding the cause.
Wiring to the room Check whether Ethernet reaches the room and whether the exact model has access point or LAN bridge mode. A LAN port on a wirelessly connected repeater doesn’t automatically provide a wired connection to the router. If I can run a cable to my home office, I want to connect an access point there without relying on the weak wireless connection. Around 21% of consumers prioritise a wired connection.
Compatibility with the router Check the router model and the mesh technology you want to use separately. OneMesh and AiMesh require compatible equipment; standard repeater operation is a separate feature. If I want to extend my existing router or mesh setup, I want to make sure the feature I choose will work with it. Router compatibility is the top priority for around 14% of consumers.

Common buying mistakes

  • Assuming a high Mbps figure is the speed you’ll get when recording a theatre performance

    A quoted Wi-Fi speed doesn’t guarantee the same speed where you watch. Your internet connection, playback device and streaming service can all make a difference.

    Test the connection on the playback device and check the service’s requirements before choosing a device.

  • Putting the repeater where the router’s signal has already dropped out

    A wireless repeater needs to receive a signal from the router to extend the network.

    Try a spot in between and check the signal indicator or setup app there. If there’s no usable wireless connection, compare Ethernet or a powerline connection tested in your home.

  • Assuming a LAN port or the word ‘mesh’ guarantees compatibility

    A LAN port may be intended for a device at the end of the connection, while the repeater itself remains wirelessly connected to the router. Proprietary mesh features require compatible equipment.

    Check the router model, the mesh feature you want, the port and the operating mode separately. Also check that the cable actually runs between the router and the access point.

Brands to compare

TP-Link

For the RE605X described in the Netherlands, TP-Link lists standard repeater operation, a signal indicator, a Gigabit port and access point mode.

  • According to TP-Link, OneMesh works with a router that supports OneMesh.
  • The quoted wireless speeds are specifications, not measured playback speeds in your room.

FRITZ!

The FRITZ!Repeater 1200 AX extends Wi-Fi 6 and has Gigabit LAN, making it relevant if you already have a FRITZ!Box or want to use it as a LAN bridge.

  • FRITZ! describes mesh integration with a FRITZ!Box and use as a conventional repeater.
  • Check the exact model and connection mode; a LAN port alone doesn’t prove that the connection to the router is wired.

devolo

For the WiFi 6 Repeater 3000, devolo describes both repeater and access point modes. It also offers powerline solutions for connections between rooms.

  • The manufacturer lists a Gigabit port on the repeater.
  • Powerline isn’t a feature of this repeater alone: you’ll need compatible adapters. The connection can vary between sockets.

ASUS

ASUS describes the RP-AX58 as a repeater that can also work as a wired access point or, with a compatible router, as an AiMesh node.

  • The AiMesh feature described offers a way to extend coverage with a compatible ASUS router.
  • AiMesh requires a compatible router. ASUS also notes that 160 MHz on 5 GHz isn’t available in every region; the maximum speed isn’t a measure of local performance.

Joybuy products for different Wi-Fi setups

This selection includes wireless repeaters, a wired access point, powerline with Wi-Fi and a mesh system. Compare the connection mode and requirements for your router and home before choosing.

TP-Link Omada EAP673-Extender Network Repeater, White

TP-Link Omada EAP673-Extender Network Repeater, White

Suitable if you want to extend your existing network wirelessly and can place the repeater within range of that network.

The product information lists dual-band Wi-Fi and Wi-Fi 6. The title lists connection speeds of 10, 100 and 1000 Mbit/s.

Joybuy
WiFi Repeater Pro, black

WiFi Repeater Pro, black

Suitable if you want to extend an existing wireless network and can install the repeater somewhere it can receive a signal.

The Wi-Fi signal described operates on 2.4 GHz. The product description mentions setup using the Mi app and a placement indicator light.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point and Wi-Fi extender

Suitable if you want to compare access point use over Ethernet with wireless extender operation.

The product name lists speeds of up to 300 Mbps, two antennas, WPS and Passive PoE. The Wi-Fi operation described is limited to 2.4 GHz.

Joybuy
TP-Link TL-WPA7517 powerline starter kit

TP-Link TL-WPA7517 powerline starter kit

Suitable if you want to compare extending your network over your home’s electrical wiring with Wi-Fi, particularly when running a cable is difficult.

The product information lists a starter kit, Wi-Fi and network speeds of up to 1000 Mbit/s. The powerline connection can vary between sockets and may be affected by electrical appliances.

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

Suitable if you want to extend coverage to several areas of your home with a mesh system.

The product name lists Wi-Fi 6 and a pack containing two Deco units. The product information also mentions Ethernet backhaul; check whether a wired connection between the units is possible in your home.

Joybuy

Frequently asked questions

How can you tell whether an extender will really help with recording a theatre performance?

Run a speed test on the playback device in your home office and compare it with a test near the router. Then check the requirements of the service hosting the recording. Netflix recommends 5 Mbps for 1080p and 15 Mbps for 4K on Netflix; these figures don’t automatically apply to another theatre service.

Where should you put a wireless repeater?

Choose a spot where the repeater can still connect reliably to the router, rather than automatically placing it next to the screen. Check the signal indicator or setup app; the Consumentenbond recommends keeping obstacles between Wi-Fi access points to a minimum.

Do you need to replace your router to use a repeater?

Not necessarily for standard repeater operation. If you want to use specific mesh features, check that the router and extender use the same supported mesh technology.

What ongoing costs and warranty rights should you consider?

An extra Wi-Fi access point uses electricity while it’s switched on, even when you’re not watching, so compare the available energy-use information. In the Netherlands, there’s no fixed legal warranty period of two years: according to the ACM, what you can expect from a product depends, among other things, on the product and the agreements made. If a product is faulty, contact the seller.

What rules apply to buying and using this equipment in the Netherlands?

Radio equipment placed on the market in the Netherlands must meet the applicable European requirements, including having a CE mark on the device. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) explains these requirements; check the mark on the actual device being offered and follow the instructions and the correct country and frequency settings during installation.