First, test the Wi-Fi on the device and in the place where you watch the theatre recording. An extender can help if the signal is weak, but it won’t automatically fix a slow internet connection. A repeater may be enough for one spot with weak Wi-Fi, while a wired access point or a mesh system with several nodes may be a better fit if you have an Ethernet cable available or need coverage in several rooms. If you’re casting from a phone or tablet, also check that both devices can find each other on the network.
Who is a Wi-Fi extender for?
Watching in one spot with a weak signal
If the recording mainly buffers on one TV, laptop or tablet, first check whether a point between the router and that room can still receive a usable Wi-Fi signal. Ziggo recommends placing a wirelessly connected Wi-Fi point where the existing Wi-Fi signal is still good.
A household watching in several rooms
If you watch in different places while other devices remain connected, consider the number of nodes, where they can be placed and the available connections. The Consumentenbond describes a test setup using laptops, smartphones and a smart TV.
Casting from a phone
If you start a recording on a phone or tablet and cast it to another screen, check that both devices can find each other on the network. For Google Cast, both devices need to be on the same Wi-Fi network.
What should you consider when choosing?
Standalone wireless repeater
Best for: one spot with weak Wi-Fi and an intermediate location where the existing signal is still good.
Bear in mind: placement is key. Also check the model’s Wi-Fi bands and whether it has an Ethernet port.
Wired access point or Wi-Fi point
Best for: a room with a weak signal that you can run an Ethernet cable to.
Bear in mind: you’ll need a cable route and a suitable access point or Wi-Fi point.
Mesh system with multiple nodes
Best for: several rooms or floors where devices need a usable Wi-Fi connection.
Bear in mind: check how many nodes are included, where they can be placed and which devices need to work with them.
| Consideration |
What to look for |
Who should consider this? |
| Signal where you watch |
Test the Wi-Fi where you watch and, if you’re using a wireless repeater, where you plan to place it. Ziggo recommends placing its wirelessly connected pods where the Wi-Fi signal is still good. |
If you mainly have a weak connection on one TV or another screen, you’ll want usable Wi-Fi right there. Around 33% of consumers prioritise signal strength where they watch. |
| Several devices at once |
Check which Wi-Fi bands and connections the model supports, and where the nodes will go. Older devices won’t automatically benefit from Wi-Fi 6 improvements. |
If you also use phones, laptops or other screens while watching, check the connection in the rooms involved. Around 25% of consumers prioritise different devices being used at the same time. |
| Casting and device discovery |
For Google Cast, your phone or tablet and the casting device need to be on the same Wi-Fi network and able to find each other, according to Google. |
If you cast the recording from a phone or tablet to a screen, you’ll want the devices to work together on the local network. Around 25% of consumers consider compatibility and device discovery their main priority. |
| Installation and requirements |
Count how many nodes you need and check whether you’ll need an Ethernet cable or suitable Ethernet ports. A mesh system needs space for each node. |
If you want to keep installation simple and limit the number of devices or cables needed, compare these practical requirements. Around 17% of consumers prioritise installation and total cost. |
Common buying mistakes
-
Placing a wireless extender where the Wi-Fi signal already drops out
A wireless point uses the connection where it is placed to stay in touch with the rest of the network. If it’s somewhere without a usable signal, it won’t necessarily extend the network there.
Test the Wi-Fi where you plan to place the point. Consider a wired connection if the Wi-Fi signal there is too weak.
You may still need an Ethernet cable or an extra Wi-Fi point.
-
Assuming a high Wi-Fi speed guarantees uninterrupted playback
The connection where you watch, your devices and your internet connection all play a part. Devices with older Wi-Fi won’t automatically support the improvements offered by Wi-Fi 6.
Test the connection on the screen you watch on and check which Wi-Fi standards your existing devices support.
-
Choosing a set without checking what’s in the box
The Consumentenbond product page for the Deco X50 (2-pack) gives conflicting information about how many nodes are included. So the name alone doesn’t make the exact contents clear.
Ask for confirmation of how many nodes and which accessories are included in the specific version. If the box contains fewer nodes than you need, you may need an extra Wi-Fi point.
You may need an extra point if the confirmed set contents don’t cover enough areas.
-
Setting up a separate network without testing casting
For Google Cast, your phone or tablet and the casting device need to be able to find each other on the local Wi-Fi network.
Test device discovery and check that the app has permission to access the local network before changing your network settings.
Brands to consider
TP-Link
The Deco X10 and X50 are examples of mesh systems for extending Wi-Fi to several rooms. Check how many nodes are included in each version.
- The Consumentenbond lists Wi-Fi 6 and two Ethernet ports for the Deco X10 (2-pack).
- For the Deco X50 (2-pack), the product page lists Wi-Fi 6 and three Ethernet ports, but contradicts itself about how many nodes are included. Check the exact contents of the set; these specifications don’t guarantee coverage in your home.
NETGEAR
The EX6120 is an example of a standalone dual-band repeater for extending an existing Wi-Fi connection to one weak spot.
- According to NETGEAR, the EX6120 also supports access point mode and has one 10/100 Mbps Ethernet port.
- The claimed wireless speed isn’t a measured streaming speed, and the Ethernet port isn’t a gigabit port. The product page is aimed at the US market and doesn’t show that this version is available in the Netherlands.
KPN
SuperWifi is a provider-specific option for extending existing KPN Wi-Fi with Wi-Fi points.
- For SuperWifi 1, KPN describes a gigabit Ethernet port and an installation process where the point is connected by cable first and can then be placed wirelessly.
- These specifications don’t automatically apply to SuperWifi 2 or other modems.
Ziggo
SmartWifi pods are a provider-specific option for households with a compatible Ziggo SmartWifi modem.
- For pod 5, Ziggo lists support for 2.4 and 5 GHz, plus one gigabit LAN connection.
- Ziggo recommends placing a wireless pod where the existing Wi-Fi signal is still good. The specifications for pod 5 don’t automatically apply to pod 6.
Joybuy product picks
These product picks are TP-Link Deco mesh systems with multiple nodes, designed to extend Wi-Fi to different areas of your home. For one spot with a weak signal, a repeater or wired access point is still an alternative.
No image available
TP-Link Deco BE68 2-Pack
This two-node mesh system is designed to extend Wi-Fi to several areas.
The product description lists tri-band Wi-Fi on 2.4, 5 and 6 GHz, plus Ethernet ports on each node.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack) Dual-band Wi-Fi 6
This set of three mesh nodes is designed to extend Wi-Fi to several rooms.
The product description lists dual-band Wi-Fi 6 on 2.4 and 5 GHz, plus three gigabit Ethernet ports on each node.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack) Tri-band Wi-Fi 6E
This set of three mesh nodes is designed to provide coverage in several areas of your home.
The product description lists tri-band Wi-Fi on 2.4, 5 and 6 GHz, plus both gigabit and 2.5-gigabit Ethernet ports.
View at Joybuy
No image available
TP-Link Deco XE75 mesh system with 3 nodes
This three-node mesh system is designed to extend Wi-Fi to several rooms.
The product description lists tri-band Wi-Fi on 2.4, 5 and 6 GHz, plus three gigabit Ethernet ports on each node.
View at Joybuy
No image available
TP-Link Deco X50 (2-pack) Dual-band Wi-Fi 6
This two-node mesh system is designed to extend Wi-Fi to more than one area.
The product description lists dual-band Wi-Fi 6 on 2.4 and 5 GHz, plus three Ethernet ports on each node.
View at Joybuy
Frequently asked questions
Will a Wi-Fi extender help if the theatre recording keeps buffering everywhere?
Not always. First check your internet connection and test on the device you’re watching on. If the connection or streaming service also buffers close to the router, extra Wi-Fi coverage may not solve the problem.
Where should you place a wireless Wi-Fi extender?
Don’t place a wireless extender where the original signal has already dropped out. Ziggo recommends placing its wirelessly connected pods where the Wi-Fi signal is still good; the best location depends on your home and equipment. If you have an Ethernet cable available, you can also connect a suitable point by cable.
Why doesn’t your screen appear when you cast from a phone?
For Google Cast, your phone or tablet and the casting device need to be on the same Wi-Fi network. Also check whether the app has permission to use the local network. This applies specifically to Google Cast; check other playback methods separately.
What can you do if an extender breaks sooner than expected?
In the Netherlands, statutory warranty may apply alongside any manufacturer’s warranty. ACM ConsuWijzer states that if a product breaks sooner than you could reasonably expect under normal use, the seller must repair or replace it free of charge, or refund the purchase price where applicable. There is no fixed statutory warranty period for all products.
Which product marking matters for a Wi-Fi extender in the Netherlands?
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements. The Rijksinspectie Digitale Infrastructuur states that equipment which meets these requirements receives a CE marking before it is placed on the market in the EU. Check the marking and product information for the specific extender; a statement on a product page isn’t, by itself, an independent conformity test.