A Wi-Fi extender is worth considering if the signal is weak where you watch and you can place the additional Wi-Fi point somewhere it gets good reception. If the connection also stutters next to the router, or your wired internet speed is disappointing, an extra Wi-Fi point won’t fix the broadband connection. If you can run an Ethernet cable to your viewing area, compare a wired access point with wireless repeating.
Who could benefit?
Watching in a room with a weak Wi-Fi signal
If your concert stream mainly stutters when you’re far from the router, an important consideration is whether you can place the extra Wi-Fi point somewhere the router’s signal is still strong. The Consumers’ Association advises placing a Wi-Fi extender where reception is good enough.
Living in a busy Wi-Fi household
If your housemates are online at the same time, it’s worth considering both the network’s coverage and its capacity. An extender won’t automatically increase your broadband speed; the Consumers’ Association highlights Wi-Fi 6 as something to consider when several people are online at once.
Watching somewhere you can run a cable
If you can run an Ethernet cable to your TV or to a Wi-Fi point near where you watch, compare a wired setup with wireless repeating. Ziggo describes a cable connection to a Wi-Fi point as a way to connect it to the router over a wired connection.
What should you look for?
| What to consider |
What should you look for? |
Who is this most relevant to? |
| Coverage where you watch |
Compare reception next to the router and in the room; look for a spot in between where the signal is strong enough. |
If the stream mainly stutters in a room further from the router, I want to know where a Wi-Fi point can still get good reception. Around 36% of consumers prioritise coverage where they watch. |
| Using the network at the same time |
Test your broadband connection over Ethernet and check whether the devices you use support Wi-Fi 6. |
When housemates are online at the same time, I want to know whether the network can cope with the combined load and whether the problem lies with the broadband connection. Around 29% of consumers prioritise simultaneous use. |
| Wired connection |
Check whether you can run a cable to the router and whether the Wi-Fi point supports access point mode. |
If I can run a cable to the TV or Wi-Fi point, I want to know whether that’s a better fit for my usual viewing spot than wireless repeating. Around 21% of consumers prioritise a wired setup. |
| Compatibility with your network |
Make a note of your router model and check the requirements for the mesh features you want to use. |
If several people use the network, I want to know whether the extra Wi-Fi point will work well with our router and be easy to manage. Around 14% of consumers give this the highest priority. |
Common buying mistakes
-
Buying an extender without testing your broadband connection
An extra Wi-Fi point won’t make a slow wired internet connection faster. First, run a speed test on a computer connected with an Ethernet cable, then compare the connection in different parts of your home.
If the problem is with your broadband connection, buying extra Wi-Fi equipment may be unnecessary.
-
Placing the extender where the router’s signal is already almost gone
An extender also needs a usable connection to the network. Choose a spot in between with as few obstacles as possible, and use the placement indicator or setup app if available.
-
Confusing an Ethernet port for your TV with a wired connection to the router
Connecting your TV to a wireless extender with a cable doesn’t automatically give the extender a wired connection to the router. Check separately how the Wi-Fi point connects to the router.
A wired setup may require you to run a cable to the router.
-
Assuming every mesh device offers all its features with your router
OneMesh and AiMesh each have their own compatibility requirements. Check the exact router model before relying on brand-specific mesh features.
These features may require a compatible router or a different network setup.
Brands to consider
TP-Link
TP-Link describes the RE705X as a Wi-Fi 6 extender with an Ethernet port and access point mode.
- According to TP-Link, the RE705X can work as an extender with Wi-Fi routers; its Ethernet port can also be used in access point mode.
- OneMesh requires a compatible OneMesh router. Advertised band speeds don’t indicate how well a stream will perform in your home.
FRITZ!
According to FRITZ!, the FRITZ!Repeater 1200 AX combines Wi-Fi 6 with a Gigabit LAN connection.
- According to the manufacturer, the LAN connection can be used for an end device or to connect to the router over a wired connection.
- The automatic transfer of settings described applies to a FRITZ!Box setup and won’t necessarily work with every router.
NETGEAR
The NETGEAR EAX15 is a Wi-Fi 6 extender for an existing router, with a Gigabit Ethernet port.
- The Ethernet port may be useful if you need a fixed network connection near the Wi-Fi point.
- The speeds and coverage quoted by NETGEAR don’t guarantee a particular speed in a shared home.
ASUS
ASUS describes the RP-AX58 as a Wi-Fi 6 extender that can also work as an access point.
- According to ASUS, the device can be used with many other routers; access point mode offers an alternative to wireless repeating.
- AiMesh features require a compatible AiMesh router. Also check the requirements for Wi-Fi 6 and any regional restrictions on 160 MHz.
Mesh Wi-Fi systems at Joybuy
The products below are mesh Wi-Fi systems with several Wi-Fi points for use around the home, including setups that support a wired connection.
Image unavailable
TP-Link Deco BE68 (2-pack)
A mesh system with two Wi-Fi points for extending Wi-Fi to several areas of your home.
Wi-Fi 7; the description mentions wired and wireless backhaul, plus Ethernet ports on the units.
View at Joybuy
Image unavailable
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)
A mesh system with two Deco X20 units for extending Wi-Fi to several areas of your home.
Wi-Fi 6; the setup described includes wired Ethernet backhaul between the units.
View at Joybuy
Image unavailable
TP-Link Deco X50 Wi-Fi 6 (3-pack)
A system with three mesh units for extending Wi-Fi to several rooms.
Wi-Fi 6 and dual-band on 2.4 GHz and 5 GHz; Ethernet backhaul between the units is optional.
View at Joybuy
Image unavailable
TP-Link Deco XE75 Wi-Fi 6E (3-pack)
A system with three mesh units for those who need several Wi-Fi points and wired network connections.
Tri-band on 2.4 GHz, 5 GHz and 6 GHz; three Gigabit Ethernet ports per unit.
View at Joybuy
Image unavailable
TP-Link Deco X50 Wi-Fi 6 (2-pack)
A mesh system with two Wi-Fi points for adding another point at home and connecting a fixed device.
Wi-Fi 6; the units have Gigabit Ethernet ports, and Ethernet backhaul is optional.
View at Joybuy
Frequently asked questions
How can you tell if you need a Wi-Fi extender?
Compare the connection in the room where you watch with the one next to the router. If in doubt, test your broadband connection using a computer connected via Ethernet; consistently disappointing wired speeds suggest the problem isn’t just with Wi-Fi coverage.
Where should you place a wireless Wi-Fi extender?
Don’t put it somewhere the signal is already barely reaching. Choose a spot in between with as few obstacles as possible, and use the placement indicator or setup app if available.
What warranty applies if the device doesn’t work properly?
According to the Dutch government, there is no fixed statutory warranty period of two years. However, you’re entitled to a product that works as it should, and you can contact the retailer if it doesn’t; a manufacturer’s warranty may offer additional cover.
Can you return a device bought online?
For many eligible distance purchases from a business, you have a 14-day cooling-off period. Before ordering, check the seller’s information about the purchase and the cooling-off period.
Do you need a Wi-Fi licence in the Netherlands, and what product requirements apply?
According to the Dutch Authority for Digital Infrastructure, home Wi-Fi generally doesn’t require a licence if you follow the designated frequencies and conditions of use. Radio equipment sold in the EU must meet the applicable European requirements, including CE marking; for a specific device, check that the version matches the conformity information.