Who is this relevant for?

Streaming and working at the same time

You want to watch a documentary in one room while someone works online in the workspace. Check the connection in both places: a high advertised Wi-Fi speed doesn’t tell you how well it performs there. The Consumentenbond describes a test in which several devices are connected to the network at the same time.

Working from home with weak Wi-Fi

Your workspace has an unstable connection, and reliable online work matters more to you than the maximum range advertised on paper. First, check whether the problem is local or also occurs close to the router. The Consumentenbond recommends investigating Wi-Fi problems before replacing your equipment.

Watching in a hard-to-reach room

You watch further from the router and mainly need coverage in one particular spot. How well a wireless repeater works depends in part on whether it can still receive the router’s signal where you place it. The Consumentenbond suggests the middle of the house as a possible spot if the signal is weak at the back.

What should you look for when choosing?

Wireless Wi-Fi repeater

Choose this when: one room has poor coverage and there’s still a spot with a usable signal between the router and that room.

Trade-off: the connection between the repeater and router remains wireless, so performance depends on distance, obstacles and interference.

Wired access point

Choose this when: you can run an Ethernet cable to the shared workspace and want Wi-Fi there for several devices.

Trade-off: you’ll need cabling and a model with access point mode. A LAN port for a device doesn’t automatically mean the connection to the router is wired.

Compatible mesh network

Choose this when: several rooms need coverage or devices regularly move between rooms, provided the router and mesh devices work together.

Trade-off: mesh features vary between ecosystems. For OneMesh with the RE605X, TP-Link requires a compatible OneMesh router; FRITZ! describes the 1200 AX’s mesh features when used with a FRITZ!Box.

Check your existing connection first

Choose this when: the connection is slow even close to the router, or there’s already adequate coverage where you watch.

Trade-off: checking your connection and the router’s position or settings could prevent an unnecessary purchase. An extender won’t make your internet plan faster.

What to consider What should you check? Who is this important for?
Streaming at the same time Check the connection where you watch while streaming and when other devices are active. Compare the results with the picture quality you want. If I want to watch a documentary while other people are using the connection, I want to know whether the stream will remain stable in that spot. Around 36% of consumers prioritise streaming while sharing a connection.
Work connection Check the connection at both the workspace and viewing spot. See whether it’s practical to run an Ethernet cable to an access point. If online work in the shared workspace needs to remain reliable, that connection matters more to me than a high advertised maximum speed. Around 29% of consumers give their work connection top priority.
Coverage and positioning For a wireless repeater, find a spot where it can still receive the router’s signal, then test again in the room with the problem. If I mainly need Wi-Fi in a room where the router’s signal is weak, I want to know where a repeater can still pick up a signal. Around 21% of consumers prioritise coverage in a far-flung spot.
Installation and compatibility Check the access point mode, the intended LAN connection, your router’s mesh requirements and the CE marking on the specific model. If I want to use the extender easily with my existing router, I check the model requirements and the specific version first. Around 14% of consumers make suitable installation and responsible purchasing their top priorities.

Common pitfalls

  • Comparing only the highest Mbit/s figure

    An advertised maximum speed isn’t a measurement of your connection where you watch or work. Performance also depends on positioning, obstacles and simultaneous use. The Consumentenbond tests Wi-Fi extenders with several devices connected to the network.

    Check the connection where you watch and work, ideally while both activities are taking place at the same time.

  • Putting the repeater in a Wi-Fi dead zone

    The repeater also needs to receive the router’s signal. If you put it somewhere the signal has already dropped out, the connection may be poor where you need it.

    First, find a spot in between and check the signal there with a measurement or signal indicator. The Consumentenbond suggests the middle of the house as a possible spot if coverage is weak at the back.

  • Assuming a LAN port or the word ‘mesh’ guarantees everything

    A LAN port may be intended for a wired device; that isn’t necessarily the same as a wired connection between the router and access point. Mesh features may also depend on your router and the ecosystem you choose.

    Check the access point mode, the intended wired connection and your router’s mesh requirements separately. For OneMesh with the RE605X, TP-Link requires a compatible OneMesh router.

    A wired setup may need an additional Ethernet cable; some mesh features may also require a compatible device.

Brands to consider

TP-Link

According to TP-Link Netherlands’ product information, the RE605X and RE705X are Wi-Fi 6 range extenders with gigabit LAN and access point mode.

  • TP-Link says the RE605X can be used with existing Wi-Fi routers in extender mode.
  • OneMesh with the RE605X requires a compatible OneMesh router. Advertised band speeds aren’t measurements of the connection where you watch or work.

NETGEAR

NETGEAR describes the EAX15 as a dual-band Wi-Fi 6 mesh extender with a gigabit Ethernet port.

  • The manufacturer lists streaming and using several devices as suitable use cases.
  • Manufacturer information isn’t an independent performance test or confirmation of a specific version sold in a shop.

devolo

According to the Dutch manufacturer’s product page, the WiFi 6 Repeater 3000 can be used as a repeater or access point and has gigabit LAN.

  • The manufacturer states that it’s compatible with routers for repeater use.
  • The manufacturer describes mesh use with other devolo Wi-Fi products. Check the specific version against the MT number on the device.

FRITZ!

The FRITZ!Repeater 1200 AX is particularly relevant if you have a FRITZ!Box and want to use the manufacturer’s mesh features.

  • FRITZ! lists Wi-Fi 6, one gigabit LAN port and a LAN connection to a FRITZ!Box.
  • Use with other routers is also mentioned, but that doesn’t confirm that the same mesh features will be available.

Products for this use case

This selection includes access points for wired setups and Wi-Fi repeaters for extending an existing network. Check which connections and features suit your router and space for each model.

TP-Link Omada EAP653 access point

TP-Link Omada EAP653

Suitable for a wired access point setup when an Ethernet connection is available.

The product information lists dual-band Wi-Fi 6, QoS and PoE support. The product name states 2976 Mbit/s; this isn’t a measurement of the connection where you watch or work.

View at Joybuy
TP-Link EAP725-Wall access point

TP-Link EAP725-Wall

Suitable for a wired access point setup to provide Wi-Fi in a shared space.

The product information lists dual-band Wi-Fi 7 and PoE support. The product name states 5012 Mbit/s; this isn’t a measured speed at your location.

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

Suitable for extending an existing network wirelessly to a spot with poor coverage.

The description lists a 2.4 GHz signal, plug-in positioning and configuration through the Mi app.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

According to the product information, it can be used as a Wi-Fi extender or access point. A wired access point setup requires an Ethernet connection.

Specifications listed: 2.4 GHz, 802.11n, Ethernet up to 10/100 Mbit/s and passive PoE support.

View at Joybuy

Frequently asked questions

Do you need an advertised speed of more than 1000 Mbps to stream a documentary?

Not based on that figure alone. Netflix recommends a stable connection of at least 15 Mbps for its own 4K UHD streams. Check the connection on the device you’re watching on: an extender’s advertised radio speed isn’t a guaranteed internet speed, especially when other people are using the connection at the same time.

Where should you place a wireless repeater?

Don’t automatically put it in the room with the poorest coverage. Choose a spot where it can still receive a strong signal from the router, then check the connection where you want to watch and work. The Consumentenbond suggests the middle of the house as a possible spot if the signal is weak at the back.

Will a mesh extender work with any router as part of a mesh network?

No, check the requirements for each model. For OneMesh with the RE605X, TP-Link requires a compatible OneMesh router; FRITZ! describes the 1200 AX’s mesh features when used with a FRITZ!Box.

What should you look out for when using and maintaining it?

Check the warranty and update information for the specific version, and bear power consumption in mind. The Consumentenbond points out that routers and extenders are usually left on all the time.

Do you need a licence for Wi-Fi in the Netherlands, and what should you look for on the device?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence to use Wi-Fi at home or in a business premises, provided you follow the requirements for the designated frequencies and their use. Radio equipment must meet the applicable European requirements; check that the specific version has the correct CE marking.