Who is this guide for?

Uploading in a room with poor Wi-Fi

Your phone or laptop loses its signal where you upload photos. The Consumentenbond highlights the importance of placing a Wi-Fi extender carefully; you could also check whether a wired access point would be better suited to the room.

A household with old and new devices

You want to know which Wi-Fi 6 and mesh features will work with the devices and router you already have. The Consumentenbond notes that older Wi-Fi devices can connect, but won’t automatically benefit from Wi-Fi 6 improvements.

Photo uploads are slow everywhere

Uploads take a long time even when you’re close to the router. The Consumentenbond distinguishes between upload speed and Wi-Fi coverage, so first check whether your internet connection is the bottleneck.

What should you look for when choosing?

Compare an upload where you’re having problems with one close to the router. This will help you work out whether you need to improve Wi-Fi coverage, use a wired setup or address your internet connection.

Standalone wireless repeater

Best for: improving Wi-Fi in one room, provided you can place the repeater somewhere that still gets a good signal from the router.

Trade-off: the connection between the router and repeater remains wireless, so placement and obstacles matter.

Wired access point

Best for: a room with an Ethernet cable where you want to provide Wi-Fi.

Trade-off: you’ll need to be able to use a cable and check that your chosen model supports access point mode.

Compatible mesh network

Best for: several rooms that need extra Wi-Fi access points, or if you want to manage them as part of one supported system.

Trade-off: mesh features may depend on having a compatible router and devices from the same supported system. Placement is still important for wireless access points.

Check your internet connection first

Best for: when photos upload slowly even close to the router.

Trade-off: a Wi-Fi extender won’t increase your internet upload speed by itself.

What to consider What should you check? Who is this important for?
Coverage and placement Find a spot where the repeater still gets good reception from the router; check whether the model has a signal indicator. If I upload photos in a room with poor reception, I want to know whether the repeater can still get a usable signal from the router there. Around 36% of consumers give top priority to coverage where they upload.
Devices and compatibility Check the Wi-Fi versions supported by your main devices and whether your router supports the mesh features you want. When old and new devices are connected at the same time, I want to know which features my router and devices support. Around 29% of consumers prioritise compatibility and simultaneous use.
Upload speed Compare uploads close to the router with those where you use your devices; also check the upload speed included in your broadband package. If uploads are slow even right next to the router, I want to check the internet connection first rather than expect a Wi-Fi product to fix the problem. Around 21% of consumers prioritise identifying the upload bottleneck.
Number of access points and management Work out how many areas need extra Wi-Fi, and check the stated power consumption and availability of security updates. For a network used every day, I don’t want to choose more access points or features than I need, and I want to consider how it will be managed too. Around 14% of consumers prioritise the number of access points needed and ongoing management.

Common buying pitfalls

  • Confusing the AX rating with your photo upload speed

    A Wi-Fi class doesn’t measure the entire connection to an online service. The Consumentenbond points out that sending photos uses upload speed.

    Compare uploads in different locations and check your broadband package before choosing a product based on its AX rating.

  • Placing a repeater where the router’s signal has already dropped out

    A wireless repeater needs a usable connection to the router itself. A spot with no reception isn’t an obvious choice for improving Wi-Fi.

    First, find an intermediate spot with good reception. If there’s an Ethernet cable running to the room, check whether you can set up an access point.

  • Assuming every mesh device works with every other device

    OneMesh, FRITZ! mesh and AiMesh each have their own compatibility requirements; the word ‘mesh’ alone doesn’t confirm that two products will work together.

    Check the exact router and supported mesh system before choosing an extender.

Brands to consider

TP-Link

TP-Link describes the RE505X and RE605X as Wi-Fi 6 repeaters for extending an existing router’s coverage.

  • TP-Link lists a gigabit port and access point mode for both models.
  • According to TP-Link, OneMesh is only available with a compatible OneMesh router. The stated AX classes aren’t measured upload speeds for your home.

FRITZ!

According to FRITZ!, the FRITZ!Repeater 1200 AX works with a FRITZ!Box and other routers too.

  • FRITZ! lists a gigabit LAN connection and a LAN connection to a FRITZ!Box.
  • The integrated mesh management described applies to a compatible FRITZ! setup, not automatically to every router.

ASUS

ASUS describes the RP-AX58 as a Wi-Fi 6 repeater that supports a wide range of routers.

  • ASUS also lists access point mode.
  • AiMesh is relevant if you have a compatible ASUS router. ASUS notes that 160 MHz support may be limited by region.

devolo

devolo describes the WiFi 6 Repeater 3000 as a plug-in repeater.

  • According to devolo, the model has a gigabit port and access point mode.
  • devolo describes mesh networking with other devolo Wi-Fi products. Claims about easy installation and performance aren’t measurements for your household.

Joybuy products for this situation

These products suit different setups: mesh for several Wi-Fi access points, a wireless repeater to extend coverage in one area, and an access point for a wired setup.

TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

This three-point mesh set is designed for several areas with poor Wi-Fi.

The product name lists dual-band (2.4 GHz/5 GHz), Wi-Fi 6 and 802.11ax.

The product name specifies a white finish.

View at Joybuy
TP-Link Omada EAP673 extender and network repeater

TP-Link Omada EAP673 Extender

This repeater is suited to extending Wi-Fi wirelessly to an area with a weaker signal.

The product name describes the model as an extender and network repeater.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

This three-point mesh set is suited to homes where several rooms need extra Wi-Fi.

The product name lists tri-band (2.4 GHz/5 GHz/6 GHz), Wi-Fi 6E and 802.11ax.

View at Joybuy
WiFi Repeater Pro Black

Wifi Repeater Pro Black

This repeater is designed to extend an existing Wi-Fi network to an area with a weaker signal.

The listed specifications are 2.4 GHz, up to 300 Mbps and support for up to 24 devices. These aren’t measurements of photo upload speeds in your home.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653 Wireless Access Point

This access point is suited to a wired setup in a room where you want Wi-Fi; it isn’t a wireless repeater.

The product name lists 2976 Mbit/s and Power over Ethernet (PoE). Check what wired installation and power supply your setup requires.

View at Joybuy

Frequently asked questions

How can I tell whether a Wi-Fi extender will help with my photo uploads?

Compare uploads close to the router with uploads where the problem occurs. If they’re slow everywhere, first check the upload speed of your internet connection; a Wi-Fi extender won’t increase it by itself.

Where should I place a wireless repeater?

Place the repeater somewhere it can still get a good signal from the router, rather than at the point where the signal drops out. Reduce obstacles where possible and use a signal indicator if the model has one.

Can older devices connect to a Wi-Fi 6 extender?

Yes, older Wi-Fi devices can connect, but according to the Consumentenbond they won’t automatically benefit from improvements that require a Wi-Fi 6 client. Also check whether your router supports the mesh feature you want.

What costs and rights should I consider after buying?

Factor in the number of Wi-Fi access points you need and their power consumption. According to the Government of the Netherlands, online purchases are often covered by a 14-day cooling-off period. In the Netherlands, statutory consumer guarantees also apply, with no fixed statutory guarantee period; the retailer is your point of contact.

Do I need a licence to use Wi-Fi at home in the Netherlands?

Wi-Fi can be used in the Netherlands without a licence on designated frequencies and subject to the applicable conditions of use, according to the Dutch Authority for Digital Infrastructure. Radio equipment placed on the market in the EU must meet conformity requirements and carry the CE mark; a product listing alone doesn’t confirm that an individual item complies.