Who is this relevant for?

Making video calls while uploading

You want your calls to remain usable while photos are being uploaded to the cloud. Microsoft Learn notes that, alongside bandwidth, latency and packet loss can also affect the upload experience.

Uploading large photo albums

You want to send photos from a room with a poor connection. The Consumers’ Association recommends placing a Wi-Fi extender somewhere it can still receive a usable signal.

Living in a room with no coverage

You need coverage at a fixed workstation or in several rooms, and want to weigh up whether a wireless repeater or a wired access point is right for your home and internet connection.

What should you look for when buying?

First, compare the connection where the problem occurs with the one next to your router. This will help you work out whether the issue is mainly Wi-Fi coverage or your internet connection. The Consumers’ Association highlights the importance of where you place a repeater; Microsoft Learn describes factors such as latency and packet loss that can affect the upload experience even when there is enough bandwidth.

What to consider What should you check? Who should pay particular attention?
Video call stability Compare the same call during an upload next to the router and in the problem room. If I make video calls and upload photos at the same time, I want the call to remain usable. Around 36% of consumers prioritise call stability.
Uploading photos from the room Compare upload performance where the problem occurs with the connection close to the router, perhaps also without a video call. I want to be able to send my album from the room I choose. Around 29% of consumers prioritise being able to upload photos reliably.
Wi-Fi coverage Check whether a repeater can be placed somewhere with reception, or whether an Ethernet cable is available. If I need coverage at a fixed workstation or in several rooms, I want to know where a Wi-Fi access point can be placed effectively. Around 21% of consumers prioritise coverage.
Installation and compatibility Check your router model and whether it supports the repeater, access point or mesh function you want. I want to connect the extender to my router and any existing cabling, without assuming that features will automatically be compatible. Around 14% of consumers prioritise installation and compatibility.

Common mistakes

  • Confusing the advertised Wi-Fi speed with your internet upload speed

    A repeater can extend Wi-Fi coverage, but it won’t increase the upload speed of your internet connection. Microsoft Learn also notes that latency and packet loss can affect the user experience.

    Compare the connection during the same activity next to the router and where the problem occurs.

  • Placing a repeater where the router’s signal has already dropped out

    The repeater needs a usable connection to the router itself to extend the Wi-Fi signal. The Consumers’ Association recommends placing it between the router and the room with poor coverage.

    Look for an intermediate spot with reception, or check whether you can use an Ethernet cable and access point mode.

  • Assuming an Ethernet port automatically supports mesh backhaul

    An Ethernet port, access point mode and wired mesh backhaul are not the same thing. TP-Link says that, for EasyMesh Ethernet backhaul, both the router and satellite device must support the feature.

    Check the connection method you want to use, your router model and, where applicable, the supported hardware and firmware versions.

Relevant brands to consider

TP-Link

TP-Link describes the RE705X as a Wi-Fi 6 repeater with a Gigabit Ethernet port and access point mode.

  • According to TP-Link, the RE705X can work wirelessly as a repeater or be used as a wired access point.
  • OneMesh requires a compatible OneMesh router. For EasyMesh Ethernet backhaul, both the router and satellite device, including the relevant firmware, must support the feature.
  • Advertised wireless speeds are not measured upload speeds.

FRITZ!

The FRITZ!Repeater 1200 AX has Gigabit LAN; the FRITZ!Repeater 3000 AX also has three frequency bands and two Gigabit LAN ports.

  • FRITZ! says the 1200 AX can be used with other routers and with a wired connection.
  • The integrated FRITZ! mesh features depend on a compatible FRITZ! setup. Don’t assume these features are available just because a repeater connection works.
  • The 3000 AX’s specifications do not automatically apply to the 1200 AX.

devolo

devolo describes the WiFi 6 Repeater 3000 as a repeater with Gigabit LAN and access point mode.

  • According to devolo, the device can be used as an access point if there is already a network socket in the room.
  • The manufacturer describes mesh functionality with other devolo Wi-Fi products; don’t assume it will work with mesh features on just any router.
  • The product description is not an independent performance test of simultaneous uploading and video calling.

Products at Joybuy

The products below are selected to help extend your Wi-Fi, from a wireless repeater or access point to mesh systems for several rooms.

TP-Link Deco M4, three-pack, dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack), Wi-Fi 5

A mesh system for extending Wi-Fi across several rooms. The product name specifies three units, dual-band 2.4 GHz/5 GHz and Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50, three-pack, Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

A mesh system for extending coverage across several rooms. The product name specifies three units, dual-band 2.4 GHz/5 GHz and Wi-Fi 6 (802.11ax).

View at Joybuy
WiFi Repeater Pro Black

WiFi Repeater Pro Black

A wireless repeater for extending coverage to an area with a weak Wi-Fi signal. Check which Wi-Fi band this version uses and whether it suits your devices.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

An option if you’re looking for an access point or Wi-Fi extender. The product name specifies N up to 300 Mbps, two antennas, WPS and Passive PoE; check that the connection method you need is compatible with your network.

View at Joybuy
TP-Link Deco XE75 mesh Wi-Fi 6E, tri-band

TP-Link Deco XE75, tri-band Wi-Fi 6E

A mesh option for extending Wi-Fi across a larger home. The product name specifies tri-band 2.4 GHz/5 GHz/6 GHz and Wi-Fi 6E (802.11ax).

View at Joybuy

Frequently asked questions

Will a faster Wi-Fi repeater help if a video call stutters while I’m uploading?

Only if the local Wi-Fi connection is the bottleneck. Compare the same activity next to the router and where the problem occurs. If the call also stutters next to the router, look into the upload load or your internet connection. For OneDrive synchronisation, Microsoft Learn describes a setting to limit the upload speed used.

Where should you place a wireless repeater?

Place the repeater between the router and the area with poor coverage, somewhere it can still receive a signal. The Consumers’ Association recommends avoiding obstacles between Wi-Fi points as far as possible; where available, you can also use the device’s signal indicator or app.

Is an Ethernet port enough for wired mesh backhaul?

No. An Ethernet port on its own doesn’t show that a device supports wired mesh backhaul. For EasyMesh Ethernet backhaul, TP-Link requires both the router and satellite device to support the feature; also check the relevant hardware and firmware versions.

What product rule applies to Wi-Fi repeaters in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment that meets the applicable European requirements must carry a CE mark to be placed on the market in the European Union. Check the marking on the exact product version; on its own, it doesn’t tell you whether the Wi-Fi coverage will suit your home.