Who is a Wi-Fi extender suitable for?

Workshop participants with weak Wi-Fi

If your connection drops out mainly in the room where you take part in an online workshop, first check whether the issue is Wi-Fi coverage. The Consumers’ Association stresses that where you place a Wi-Fi extender matters.

Users without spare shelf space

A plug-in model could be a good option if you don’t want a separate Wi-Fi unit on a shelf. Make sure the socket is somewhere with a usable router signal and has enough space around the plug. FRITZ! describes the 1200 AX as compact.

Users with an Ethernet cable or an existing mesh network

If you have an Ethernet cable, you could consider a wired solution. To extend an existing mesh network, check your router’s requirements: TP-Link and FRITZ! describe mesh features for specific compatible routers.

What should you look for when choosing one?

Wireless plug-in repeater

Suitable if: you want to reach a room with weak Wi-Fi and have a free socket in between where the signal is still usable.

Bear in mind: the repeater connects to your router wirelessly, so the socket’s location and the signal there are key.

Wired access point

Suitable if: you can run an Ethernet cable to a suitable location, for example if there’s no good spot for a wireless connection in between.

Bear in mind: you’ll need a route for the cable and a suitable place for the access point.

Compatible mesh system

Suitable if: you want to reach several areas or extend an existing compatible mesh network.

Bear in mind: mesh features depend on the router combination. A mesh label doesn’t guarantee that devices from different brands share the same features.

With a repeater, it’s more important to place it somewhere it can still get a strong signal from the router than to focus only on its stated maximum speed. The Consumers’ Association therefore recommends paying close attention to where you place it.

Concern What to check before buying Who is this important for?
Usable coverage during the workshop Compare the connection near the router, at the midway point and in the workshop room. Check whether the model has a signal indicator or setup app. I want a usable connection in the room where I work during the workshop. Around 36% of consumers prioritise coverage where they take part in the workshop.
Placement without shelf space Check the plug’s shape and dimensions, the space around the socket and the router signal at that location. If I don’t want to use a shelf, I need a socket in a suitable location with a good signal. Around 29% of consumers prioritise a setup that doesn’t need shelf space.
Working with your existing router Note down the exact router model and check repeater performance, mesh support and available operating modes separately. I want to know whether the features I need will work with my current router. Around 21% of consumers prioritise router compatibility.
Wired connection Check whether you can run a cable to the desired location and whether the model has both the Ethernet port and access point mode you need. If there’s already an Ethernet cable available, I want to know whether it can be used for a wired extension. Around 14% of consumers prioritise a wired option.

Common buying mistakes

  • Placing the repeater where the router signal is already weak

    A repeater needs a usable connection to your existing network before it can pass that connection on.

    First choose a midway location with a usable router signal, then check the connection in your workshop room.

  • Assuming a mesh logo means it works with every router

    TP-Link OneMesh and FRITZ! Mesh have different compatibility requirements.

    Before buying, check your exact router model and whether the feature you want works with that combination.

  • Choosing a model based on its highest stated speed

    A stated maximum speed won’t tell you whether the problem in your workshop room is Wi-Fi coverage or your internet connection.

    Compare the connection near the router with the one in your workshop room before choosing a repeater.

Brands to compare

FRITZ!

The FRITZ!Repeater 1200 AX is a compact Wi-Fi 6 repeater that plugs into a socket and can extend a FRITZ!Box network.

  • FRITZ! lists one gigabit LAN connection and mesh integration with a FRITZ!Box.
  • With another router, check separately which mesh features are available. The product description isn’t an independent measure of workshop performance.

TP-Link

The RE605X and RE705X are Wi-Fi 6 extenders with a gigabit Ethernet port and access point mode.

  • TP-Link says both models can work as extenders with an existing router.
  • OneMesh requires a compatible OneMesh router. Stated wireless speeds are product specifications, not a guaranteed speed in your workshop room.

NETGEAR

The EAX15 is a Wi-Fi 6 wall-plug extender with internal antennas, for anyone who doesn’t want a device on a shelf.

  • NETGEAR lists a gigabit Ethernet port and compatibility with an existing Wi-Fi network.
  • The manufacturer’s coverage claims don’t independently confirm the performance you’ll get in a specific location, so check the signal there.

ASUS

The RP-AX58 is a Wi-Fi 6 repeater that can extend a compatible ASUS router using AiMesh.

  • ASUS also says it works as an extender with various other routers.
  • AiMesh features require an AiMesh-compatible router. ASUS warns that 160 MHz on 5 GHz may not be available in some regions; check the version and settings for your situation.

Joybuy product picks

This selection includes Wi-Fi repeaters for a suitable socket and wired access points for locations with an Ethernet connection.

TP-Link TL-WA850RE 300 Mbps Universal Wi-Fi extender

TP-Link TL-WA850RE 300 Mbps Universal

An option if you want to extend your existing Wi-Fi and have a suitable socket somewhere in between.

The product name lists 300 Mbps and Universal.

View at Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

Could be suitable if you’re looking for a repeater that plugs into a free socket and don’t want to use a shelf. Check the signal at the intended location.

View at Joybuy
TP-Link Omada EAP673-Extender Network Repeater White

TP-Link Omada EAP673-Extender

A network repeater to consider if you want to extend your existing network and have a socket with a usable signal.

The product name lists 10, 100 and 1000 Mbit/s.

View at Joybuy
TP-Link EAP725-Wall access point

TP-Link EAP725-Wall

An option for a wired access point if you can run a cable to the desired location and don’t want to use shelf space.

The product name lists Wi-Fi 7, 5012 Mbit/s and Power over Ethernet (PoE).

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N Wireless Access Point/WiFi Network Extender

Could be relevant if you can run a cable to the desired location. Check which operating mode suits your needs.

The product name lists N up to 300 Mbps, two antennas, WPS and Passive PoE.

View at Joybuy

Frequently asked questions

Where should I place a repeater if the Wi-Fi is weak in my workshop room?

Place the repeater somewhere in between where it can still get a strong signal from the router, rather than automatically putting it in the room with the weakest signal. Then check the connection in your workshop room. The Consumers’ Association stresses the importance of choosing the right location.

Does the stated Wi-Fi speed guarantee an uninterrupted online workshop?

No. A stated maximum speed doesn’t measure the connection where you work. Check coverage and placement; your internet connection and the requirements of the workshop platform you use also play a part. For example, Zoom lists an internet connection as a system requirement.

Does mesh work with every router?

No. The mesh features you want depend on the combination of repeater and router. TP-Link requires a compatible OneMesh router for OneMesh on the RE605X and RE705X; FRITZ! describes mesh integration between the 1200 AX and a FRITZ!Box.

Can I return a repeater I bought online?

In the Netherlands, purchases made online from a business generally come with a 14-day cooling-off period. The Dutch Government explains this rule; a purchase from a private seller isn’t automatically covered by the same arrangement.

What should I check about a repeater’s version?

Check that the version actually being offered has the correct CE marking, and follow the installation and usage instructions. The model name alone isn’t a substitute for these checks.