Who is this choice relevant for?

Home worker with a weak signal on another floor

Wants to access the existing network from another floor without having to run cables straight away. Whether wireless extension will work depends on finding a spot where the repeater can still receive the router’s signal. TP-Link and the Consumers’ Association highlight placement and the differences between floors as important considerations.

Worker with frequent, large backups

Prioritises a reliable connection between floors and may want to consider a cable with an access point. The National Cyber Security Centre also recommends carrying out a recovery test to check that a backup can actually be restored.

Manager of multiple workspaces

Needs network coverage on more than one floor and must consider how the router and network points work together, including how they connect to one another. NETGEAR describes backhaul as the connection between network points, which helps determine how the system communicates.

What should you look for when buying?

What to consider What should you check? Who is this important for?
Range and placement Find a spot between the router and your workspace where the repeater can still receive the router’s signal, then test the connection on the floor where you make your backup. TP-Link recommends placing it roughly halfway between them. If my workspace is upstairs, I want to know whether there’s a suitable spot for the repeater along the way. Around 33% of consumers put range first.
Backup transfer Test the actual transfer speed at your workspace. For a wired setup, check support for access point mode or Ethernet backhaul. The National Cyber Security Centre also recommends carrying out a recovery test. For large or frequent document backups, I mainly want the connection to work at that location and to be able to restore my files. Around 27% of consumers give backup transfer the highest priority.
Multiple workspaces and compatibility Work out how many locations need coverage and check the exact router models and the mesh and backhaul features they support. According to TP-Link, both the router and satellite must support the feature for EasyMesh Ethernet backhaul to work. If I work on different floors, I want to know whether the network points in those locations will work with my router. Around 20% of consumers prioritise coverage across multiple workspaces.
Security and maintenance Check what firmware support is available and make sure the security settings meet the requirements for your work network. A good Wi-Fi connection doesn’t prove that a backup can be restored. When working with documents, I also want to consider security and management requirements, separately from Wi-Fi coverage. Around 20% of consumers give these considerations the highest priority.

Common buying mistakes

  • Placing a repeater somewhere it can’t get a signal

    A wireless repeater needs to be able to receive the router’s signal. Concrete, metal and the distance between floors can all weaken the connection.

    First, find an intermediate spot with a usable signal and test the connection there before settling on a permanent location for the repeater.

  • Assuming the stated Wi-Fi speed is the speed of a backup

    With shared wireless backhaul, traffic between network points and traffic from devices may use the same Wi-Fi band. The actual transfer speed also depends on the connection between floors.

    Compare the supported backhaul options and test the transfer speed where you make your backups.

  • Assuming ‘mesh’ guarantees compatibility

    OneMesh, AiMesh and EasyMesh Ethernet backhaul all have requirements for the devices involved. Having a network port alone doesn’t prove that the backhaul feature you want will work.

    Check which features and firmware are required for your exact router and repeater. If you need cabling or extra network points, factor in the installation work.

  • Assuming a better Wi-Fi connection means your backup is safe

    Extending your Wi-Fi doesn’t create a separate backup or prove that files can be restored. The National Cyber Security Centre recommends carrying out a recovery test as well as a technical check.

    Keep your backup strategy separate from your choice of Wi-Fi equipment, and test that you can restore important work files.

Relevant brands to consider

TP-Link

According to TP-Link Netherlands, the RE705X is an example of a standalone range extender with a Gigabit port and access point mode.

  • TP-Link says the RE705X can form a single mesh network with a OneMesh router.
  • This mesh feature won’t automatically work with every router. For EasyMesh Ethernet backhaul, both the main router and the satellite must support the feature.

FRITZ!

According to the manufacturer, the FRITZ!Repeater 1200 AX is a repeater with Gigabit LAN and the option to connect to a FRITZ!Box via LAN.

  • FRITZ! lists mesh integration with a FRITZ!Box and a five-year manufacturer’s warranty for the FRITZ!Repeater 1200 AX.
  • If you use it with a router from another brand, don’t assume you’ll get the same FRITZ! mesh integration. Check the warranty terms for the exact model too.

ASUS

According to ASUS, the RP-AX58 can be used as a repeater or in access point mode.

  • ASUS describes connecting via Ethernet in access point mode or using the device as an AiMesh node.
  • AiMesh features require a compatible router. Connecting to a router from another brand doesn’t guarantee those features will work.

NETGEAR

According to NETGEAR Netherlands, the EAX15 is a range extender with a Gigabit Ethernet port.

  • NETGEAR lists a single Wi-Fi name and roaming for the EAX15.
  • A model’s theoretical speed doesn’t tell you how quickly a document backup will transfer between your floors.

devolo

According to devolo, the WiFi 6 Repeater 5400 can also work as an access point if you already have a network cable in place.

  • devolo describes mesh use with other compatible devolo products.
  • The stated maximum wireless data rate doesn’t guarantee transfer speeds between floors. devolo says standalone repeaters are mainly suited to extending Wi-Fi on a single floor.

Joybuy products for multiple workspaces

This Joybuy selection includes mesh systems for coverage in multiple locations. For each model and router, check which connection between network points is supported and whether it suits your intended setup.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A mesh system with two units is worth considering if you want to extend coverage to more than one location. Assess the connection between the units on the floors where you work.

View at Joybuy
ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White, 2 internal

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7 (2.4 GHz / 5 GHz), White, 2 Internal

This mesh system is worth considering if multiple workspaces need coverage. Check that the router and the connection you choose between the units suit your setup.

Dual-band (2.4 GHz / 5 GHz); Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50 3-pack Dual-Band Wi-Fi 6, white

TP-Link Deco X50 3-pack Dual-Band Wi-Fi 6 (2.4 GHz / 5 GHz)

Three units may suit multiple workspaces that need coverage. Decide where to place them based on the connection between the points, and check whether wired backhaul is suitable for your setup.

Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 Pro 3-pack Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack Tri-Band Wi-Fi 6E (2.4 GHz / 5 GHz / 6 GHz)

A three-unit system is worth considering when several workspaces need coverage. Check the placement and the connection between network points on your floors.

Tri-band (2.4 GHz / 5 GHz / 6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE 3-pack Dual-Band Wi-Fi 6 with 2 Ethernet ports

TP-Link Deco X50-PoE 3-pack Dual-Band Wi-Fi 6, 2 Ethernet ports

This system is worth considering for a setup with multiple wired network points. Check the power requirements in advance and make sure the chosen configuration suits your network.

Dual-band (2.4 GHz / 5 GHz); Wi-Fi 6 (802.11ax); 2 Ethernet ports.

View at Joybuy

Frequently asked questions

Can I put a repeater in a room where there’s no router signal?

For wireless use, the repeater first needs to receive the existing router signal. Try an intermediate spot and check the signal there. If that doesn’t work, look into using a cable with an access point.

Does having an Ethernet port mean my router supports wired mesh?

No. According to TP-Link, both the main router and the satellite must support EasyMesh Ethernet backhaul. Access point mode is a different option, so check the exact models and the firmware they require.

How can I check that my document backup works?

Don’t just check the network connection or rely on a message saying the copying is complete. The National Cyber Security Centre recommends carrying out a technical check and a recovery test to make sure files can be restored.

What else should I consider besides the repeater?

Check whether your setup requires cabling or extra network points, and find out what support and warranty apply to the exact model. FRITZ! lists a five-year manufacturer’s warranty for the FRITZ!Repeater 1200 AX; this isn’t a standard warranty period for other models or brands.

What rules apply to a Wi-Fi repeater sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, the applicable European requirements for radio equipment must be followed. Where the product complies, the manufacturer affixes a CE mark. Since 1 August 2025, stricter cybersecurity requirements have also applied to almost all wireless devices. A webshop listing alone doesn’t prove that the product supplied meets all applicable requirements.