Who is this buying guide for?

Workshop participant with weak Wi-Fi upstairs

If you usually join the workshop on a floor where your router’s signal is weak, you’ll want to know whether one well-placed repeater will do the job. The Consumentenbond advises placing it where you want to extend the signal.

Workshop participant with a fixed workspace and an Ethernet cable

If there’s a cable running to another floor, you could connect an access point using a wired connection. TP-Link and FRITZ! describe wired connection options for specific models.

Workshop participant who moves between floors

If you use different rooms during the workshop, you may want Wi-Fi in more places. Check that your router supports the mesh features you want to use; for example, TP-Link’s OneMesh works with compatible equipment.

What should you look for when buying?

For an online workshop across multiple floors, the connection between your router and the extra Wi-Fi point is just as important as coverage at your workspace.

What to consider What should you check? Who is this important for?
Coverage where you join the workshop Try possible midway locations within range of the router, then check the connection at your final workspace. If I mainly take part from one upstairs floor, I want good coverage there. Around 36% of consumers say coverage is their main concern when buying.
A stable connection to the router Check whether there’s a cable running to the extra point and whether the model has a suitable access point or LAN mode. For my regular workshop workspace, I don’t want the picture and sound to depend on a weak wireless connection between floors. Around 29% of consumers say stability is their main priority.
Coverage in several places Check that your router and repeater are mesh-compatible, and work out where each point will get a usable connection. If I move between floors during the workshop, I want to be able to use Wi-Fi in different places. Around 21% of consumers prioritise coverage in several places.
Installation and ease of use Factor in the number of points you’ll need and any cabling; also check the CE marking and conformity information for the specific device. I don’t want unnecessary installation work or extra points, but I also want to check the device’s conformity before buying. Around 14% of consumers say installation and total cost are their main concerns when buying.

Common buying mistakes

  • Placing a repeater in a complete Wi-Fi dead zone

    A repeater also needs a usable connection to the router where you place it. Without that connection, it can’t pass the signal on properly.

    First, find a spot where the router’s signal is still strong, then check the connection where you’ll join the workshop. TP-Link offers this placement advice, but results will depend on your home.

  • Assuming every mesh product works with your router

    Mesh features may depend on the router, the repeater you choose and its firmware. Being able to extend your Wi-Fi doesn’t automatically mean that all mesh features will be available.

    Check the full model names and the manufacturer’s compatibility information. For OneMesh, TP-Link specifies a compatible OneMesh router and, if necessary, updated firmware.

  • Assuming the maximum Wi-Fi speed guarantees a stable workshop connection

    The advertised maximum speed alone doesn’t tell you how well the connection will perform on another floor or at your workspace. The Consumentenbond tests Wi-Fi extenders on different floors and at different distances.

    Check the connection where you’ll be taking part, and compare measurements taken under similar conditions wherever possible.

Brands to compare

TP-Link

The RE705X is a Wi-Fi 6 repeater for wireless extension or use as a wired access point.

  • TP-Link lists a gigabit Ethernet port and access point mode for the RE705X.
  • OneMesh features require a compatible router and may need a firmware update; this isn’t an independent performance test.

FRITZ!

The FRITZ!Repeater 3000 AX is a tri-band Wi-Fi 6 model with two gigabit LAN ports.

  • FRITZ! describes a LAN connection to a FRITZ!Box and use with other routers.
  • FRITZ! mesh features are mainly relevant when used with a compatible FRITZ! network; an advertised maximum speed doesn’t guarantee a workshop connection on another floor.

ASUS

The RP-AX58 is a Wi-Fi 6 range extender that can be used as an AiMesh extension or a standard extender.

  • ASUS lists AiMesh and access point modes.
  • AiMesh requires a compatible router; check the operating mode and combination you need before buying.

devolo

The WiFi 6 Repeater 5400 is designed to be placed as a separate Wi-Fi point.

  • The signal indicator can help you find a suitable spot for the repeater.
  • devolo describes mesh use with other compatible devolo Wi-Fi products; the stated data rate isn’t a measured speed between floors.

Joybuy products for Wi-Fi across multiple floors

The Joybuy options below are mesh systems for extending Wi-Fi to several areas of your home. Before buying, check that the system is compatible with your existing router and provides the connection between points you need.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

This mesh system is designed to extend coverage to several Wi-Fi points around your home.

View at Joybuy
TP-Link Deco E4 (3-pack), dual-band 2.4 GHz/5 GHz, Wi-Fi 5 (802.11ac), white and grey

TP-Link Deco E4 (3-pack), dual-band 2.4 GHz/5 GHz, Wi-Fi 5 (802.11ac), white and grey

This three-unit mesh system is suited to homes that need Wi-Fi points in different areas.

View at Joybuy
ASUS ZenWiFi BD4, dual-band 2.4 GHz/5 GHz, Wi-Fi 7 (802.11be)

ASUS ZenWiFi BD4, dual-band 2.4 GHz/5 GHz, Wi-Fi 7 (802.11be)

This mesh option is suited to anyone looking to extend Wi-Fi coverage to several areas of their home.

View at Joybuy
TP-Link Deco X50 (3-pack), dual-band 2.4 GHz/5 GHz, Wi-Fi 6 (802.11ax)

TP-Link Deco X50 (3-pack), dual-band 2.4 GHz/5 GHz, Wi-Fi 6 (802.11ax)

This three-node mesh system is designed to extend coverage to several Wi-Fi points.

View at Joybuy
TP-Link Deco X50 (2-pack), dual-band 2.4 GHz/5 GHz, Wi-Fi 6 (802.11ax)

TP-Link Deco X50 (2-pack), dual-band 2.4 GHz/5 GHz, Wi-Fi 6 (802.11ax)

This two-unit mesh system is an option if you want to extend Wi-Fi to more than one area.

View at Joybuy

Frequently asked questions

Where should I place a wireless repeater before a workshop?

Place the repeater within good range of the router, roughly halfway between the router and the weak spot, then check the connection where you’ll join the workshop. TP-Link offers this placement advice, but results will depend on your home.

Will any mesh repeater automatically work with my current router?

No. Mesh features may depend on the router and the repeater you choose. For OneMesh, TP-Link specifies a compatible OneMesh router and, if necessary, a firmware update, so check the full model combination.

Is one repeater enough for a workshop across multiple floors?

It may be enough if one workspace has weak coverage and the repeater itself receives a usable signal from the router. If coverage is weak on several floors, you could consider using multiple points; check the connection wherever you’ll be taking part.

Do I need a licence for standard Wi-Fi in the Netherlands?

The Rijksinspectie Digitale Infrastructuur states that Wi-Fi is licence-exempt under the applicable conditions and doesn’t require notification or registration. You should still check the conformity and permitted frequencies of the specific device.