Who might benefit from extending their Wi-Fi?

Watching TV on a hard-to-reach floor

Wants to watch a documentary on a floor where the router’s signal is weak. The Consumentenbond points out that, when placed wirelessly, Wi-Fi points need to be able to reach one another, and that walls and floors can interfere with the signal.

Weak Wi-Fi across several floors

Needs coverage on more than one floor and should check whether multiple points can connect to one another in suitable locations, possibly using an ethernet cable.

Keeping an existing router or using ethernet cables

Wants to keep their current router or make use of existing ethernet cabling. Check each model to see whether the repeater, access point or mesh function you want will work with your router and connection.

What should you look for when choosing?

A single wireless repeater

A good fit when: there’s weak coverage mainly in one viewing spot, with another location between the router and that spot where the Wi-Fi is still usable.

Bear in mind: the repeater may not get a usable connection if you put it in the dead zone itself. Mesh features may require a compatible router.

Multiple mesh Wi-Fi points

A good fit when: coverage is missing on different floors and you can place several points in suitable locations in between.

Bear in mind: you’ll need to place and power several devices. A stated coverage area in square metres won’t predict how well the signal will travel through your floors.

Wired access point or mesh system

A good fit when: there’s an ethernet cable running to a floor with weak Wi-Fi and you want to make use of it.

Bear in mind: cabling needs to be available or installed. PoE power requires compatible equipment.

Concern What to look for when buying Who might this matter more to?
Coverage on the viewing floor Check how many points you need and whether you can place them where the connection is still usable. If I watch TV upstairs, I want good Wi-Fi there without putting the extra point in the dead zone. Around 36% of consumers prioritise coverage on the floor where they watch TV.
Reliable streaming Test the internet connection with an ethernet cable at the router, then check the Wi-Fi where you watch TV. Also see whether you can connect the TV by cable. If the connection keeps dropping while I’m watching a documentary, I want to know whether the cause is my internet connection or the Wi-Fi where I’m watching. Around 29% of consumers give reliable streaming top priority.
Router and cabling Make a note of your router model and check that it supports the function you want: repeater, access point or mesh node. If I want to keep my router or already have ethernet cables, I want to know whether the extender will work with them. Around 21% of consumers prioritise compatibility with their existing network.
Overall cost and power use Compare how many points you need and how they’re powered, including any cables or PoE equipment. If I extend my Wi-Fi, I want to factor in devices that stay switched on all the time and any extra power supplies. Around 14% of consumers prioritise overall cost and power use.

Common pitfalls

  • Putting the extender in a room with no router signal

    A wireless extra point needs a usable connection to the previous point. The Consumentenbond recommends checking its position and connection where you watch TV.

    First find a spot in between where the signal is usable, then test the connection where you watch TV.

  • Treating the stated Wi-Fi speed or coverage as a guarantee

    Distance, floors and other obstacles all affect the connection. A manufacturer’s figures aren’t a measurement of performance in your home.

    Check the connection where you watch TV and see how the Wi-Fi points are connected to one another.

  • Assuming every mesh extender works with every router

    Features such as OneMesh and AiMesh have specific requirements for compatible routers. TP-Link says OneMesh works with a compatible OneMesh router; ASUS describes AiMesh as requiring a compatible AiMesh router.

    Check the exact router model and the function you want before choosing an extender.

  • Assuming PoE works through any network socket

    According to TP-Link, the Deco X50-PoE supports PoE power via 802.3at or 802.3bt, but not 802.3af.

    Check the power standard supported by your equipment. Power over ethernet may require a compatible PoE switch or other PoE power supply, as well as cabling.

Brands to consider

TP-Link

The models mentioned include both a standalone extender and mesh systems with wired connection options.

  • According to TP-Link, the RE705X has a gigabit port and its OneMesh function works with a compatible OneMesh router.
  • According to TP-Link, the Deco X50-PoE has two 2.5GbE ports per point. PoE power requires a compatible standard.
  • These model specifications don’t tell you what coverage you’ll get in a three-storey house.

FRITZ!

The FRITZ!Repeater 1200 AX may be worth considering if you’re expanding an existing FRITZ! setup or have a wired connection.

  • FRITZ! lists a gigabit LAN port and a LAN connection with a FRITZ!Box.
  • The mesh features described are for a compatible FRITZ! network; they don’t guarantee coverage across three floors.

ASUS

The options mentioned are the standalone RP-AX58, which can be used as an AiMesh node, and the multi-unit ZenWiFi XD4 Plus system.

  • ASUS describes using the RP-AX58 as an AiMesh node with a compatible AiMesh router, and ethernet backhaul subject to the relevant requirements.
  • A coverage area stated by ASUS isn’t a measurement of reception in your home.

Mesh systems at Joybuy

These product options are mesh systems with multiple points to provide Wi-Fi in different areas of your home. Before buying, check that the system is compatible with your router and cabling, and review the documentation for the version on offer.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh system with two points may suit you if you want to extend Wi-Fi to several areas of your home.

Wi-Fi 7, tri-band and WAN/LAN ports on each point.

Joybuy
TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

A set with three units may suit you if you want to spread Wi-Fi across several areas; check the connection on each floor.

Dual-band (2.4 GHz/5 GHz), Wi-Fi 5 (802.11ac) and two ethernet ports per device.

Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

This mesh system with three points may suit you if you need Wi-Fi in several areas of your home.

Dual-band (2.4 GHz/5 GHz), Wi-Fi 5 (802.11ac) and two ethernet ports per device.

Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A set with three mesh points may suit you if you need coverage in several areas. If you have ethernet cables, check whether you can connect the points to one another by cable.

Wi-Fi 6 (802.11ax); ethernet backhaul is optional.

Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack)

A mesh system with three devices may suit you if you want Wi-Fi in several areas of your home.

Tri-band (2.4 GHz/5 GHz/6 GHz), Wi-Fi 6E (802.11ax) and three Gigabit ethernet ports per device.

Joybuy

Frequently asked questions

Should I upgrade my internet speed first?

Not until you’ve worked out where the problem lies. Test your connection with an ethernet cable at the router and compare it with the Wi-Fi where you watch TV. A faster broadband package won’t automatically fix weak Wi-Fi caused by distance or floors.

Where should I place a wireless extender?

Place it where the signal from the previous Wi-Fi point is still usable, and avoid obstacles where possible. If available, use the indicator light or setup app, then test the connection where you watch TV.

Do I automatically need a Wi-Fi 7 system for 4K streaming?

No. The Wi-Fi generation you need doesn’t depend on picture quality alone. The Consumentenbond says that one Netflix stream in Ultra HD needs an internet connection of 15 Mbit/s or faster. The actual requirement also depends on the service, picture quality and how many people are using the connection at once. Test the connection where you watch TV.

What might a wired PoE setup require?

According to TP-Link, the Deco X50-PoE can use the supplied DC adapter. To power the device through the network cable, you’ll need a suitable 802.3at or 802.3bt PoE power supply; 802.3af isn’t supported. The cables or additional equipment you need will depend on your existing setup.

What should I check when buying a Wi-Fi extender in the Netherlands?

Check that the version on offer meets the applicable requirements and comes with the relevant documentation. The Netherlands’ Authority for Digital Infrastructure states that manufacturers apply the CE marking when a product conforms to the requirements. Check this for the specific device.