Who is this choice relevant to?

Archive manager with floors that can be cabled

Needs access to the archive on different floors and can use an existing Ethernet connection or have a cable installed. TP-Link and FRITZ! describe options for a wired connection to an additional Wi-Fi point.

Volunteer with one weak spot in the archive

Wants to extend the existing network without installing new Wi-Fi points everywhere and can look for a suitable intermediate position for an extender. The Consumers’ Association advises placing Wi-Fi points where there are as few obstacles between them as possible.

Club member moving between floors

Uses mobile devices in different areas of the archive, so wants to consider how the Wi-Fi points work together and whether they’re compatible with the router. TP-Link and ASUS describe mesh features that depend on using compatible equipment.

What should you look for when buying?

First, decide how the additional Wi-Fi point will connect to the router. Then choose the number of points to suit the areas where the archive is used.

One wireless Wi-Fi extender

Choose this when: reception is poor in just one area of the archive and there’s an intermediate position where the router signal is still usable.

Bear in mind: positioning is key; according to TP-Link, mesh features such as OneMesh require a compatible router.

Mesh system with multiple points

Choose this when: members need a connection on several floors or in different areas of the archive, and there are suitable places for the points.

Bear in mind: multiple points mean more equipment and installation work; check how the system will work with your existing router.

Wired access point or mesh with Ethernet backhaul

Choose this when: there’s an Ethernet connection to the floor you need, or one can be installed, so the connection between points doesn’t have to be wireless.

Bear in mind: installing a cable takes work; in Deco access point mode, the main router manages the clients and some advanced Deco app features aren’t available, according to TP-Link.

Consideration What should you check? Who is this important to?
Connection between floors Check where Ethernet is available and whether the device you choose supports access point mode or Ethernet backhaul. TP-Link describes Ethernet backhaul for Deco X50. If I want to access the archive on several floors, I want the additional point to get a good connection to the router; around 36% of consumers prioritise a reliable connection between floors.
One weak spot in the archive Find an intermediate position where the extender can still receive the existing signal. The Consumers’ Association advises placing Wi-Fi points with as few obstacles between them as possible. If reception is poor in just one archive room, I want to extend the existing network where it’s needed; around 29% of consumers say improving one weak spot is their main concern.
Coverage in several areas Check how many points you need and whether the router you have is compatible with the mesh feature you want. TP-Link and ASUS require compatible routers for specific mesh features. If I move between areas of the archive with a phone or laptop, I want a connection in those areas and Wi-Fi points that work with the router; around 21% of consumers prioritise coverage while moving around.
Access to archive data If the archive contains personal data, discuss access rights, network separation and management with the network administrator. The Dutch Data Protection Authority lists measures of this kind for protecting personal data. If the archive contains personal data, I want to control who can open files and how the network is managed; around 14% of consumers say access security is their main concern.

Common pitfalls

  • Putting a wireless extender where the original signal is already weak

    The extender needs to receive a good signal from the network itself; otherwise, the connection to the router may remain a bottleneck. Obstacles and the distance between Wi-Fi points also make a difference.

    Try an intermediate position first, then check the connection in the archive areas after installation. If that position isn’t enough, you may need to move the extender; a cable or an extra point may also be needed.

  • Assuming a mesh feature works with every router

    TP-Link requires a compatible router for OneMesh; ASUS describes AiMesh extension using an AiMesh-compatible router.

    Make a note of your current router model and check before buying whether the specific combination supports the mesh feature you want.

  • Confusing Wi-Fi coverage with access security

    Greater coverage doesn’t determine who can open archive files. If the archive contains personal data, the Dutch Data Protection Authority says the organisation must protect it properly.

    Discuss access rights and network management separately from your choice of Wi-Fi points; the Dutch Data Protection Authority lists authorisation and network separation among the possible measures.

Relevant brands for reference

TP-Link

The RE605X and RE705X are standalone extenders with access point mode; Deco X50 is an expandable mesh system with optional Ethernet backhaul.

  • According to TP-Link, the RE605X can repeat a signal wirelessly or work as an access point via Ethernet.
  • OneMesh requires a compatible router. In Deco access point mode, the main router manages the clients and some advanced app features aren’t available, according to TP-Link.

FRITZ!

The FRITZ!Repeater 1200 AX is a compact option for extending your network, especially if the club already uses a FRITZ!Box.

  • FRITZ! lists a gigabit LAN port and a LAN connection to the FRITZ!Box for Mesh Wi-Fi.
  • It can be used with other routers, but that doesn’t confirm that all FRITZ! mesh features will be available.

ASUS

The RP-AX58 is a Wi-Fi 6 extender for anyone looking to take their existing router and a potential AiMesh setup into account.

  • ASUS lists compatibility with a wide range of routers.
  • ASUS describes AiMesh extension specifically with an AiMesh-compatible router; the stated wireless speed isn’t a measured speed in the club building.

NETGEAR

The EAX15 is a standalone Wi-Fi 6 extender for extending existing Wi-Fi.

  • NETGEAR lists a gigabit Ethernet port and compatibility with existing Wi-Fi.
  • Coverage in a home quoted by NETGEAR isn’t a test of signal range across the floors of a club building.

Joybuy products for multiple archive areas

This selection features mesh kits with multiple points for access from different areas of the archive. Also check the CE marking on the exact model: according to the Dutch Authority for Digital Infrastructure (RDI), radio equipment sold in Europe must meet the applicable requirements and carry a CE mark.

TP-Link Deco X50, 3-pack

TP-Link Deco X50, 3-pack

This mesh kit with three points is designed to provide Wi-Fi in several areas of the archive.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz). TP-Link describes optional Ethernet backhaul for Deco X50.

In access point mode, the main router manages the clients and some advanced Deco app features aren’t available, according to TP-Link.

Joybuy
TP-Link Deco XE75 Pro, 3-pack

TP-Link Deco XE75 Pro, 3-pack

This mesh kit with three points is an option when you need Wi-Fi in several areas of the archive.

Tri-band (2.4 GHz, 5 GHz and 6 GHz), Wi-Fi 6E (802.11ax).

Check the CE marking on the exact model before buying.

Joybuy
TP-Link Deco XE75, 3-pack

TP-Link Deco XE75, 3-pack

A mesh kit with three points for spreading Wi-Fi across several areas.

Tri-band (2.4 GHz, 5 GHz and 6 GHz), Wi-Fi 6E (802.11ax).

The product name states that it’s for indoor use; check the CE marking on the exact model before buying.

Joybuy
TP-Link Deco X50-PoE, 3-pack

TP-Link Deco X50-PoE, 3-pack

This set of three mesh points is an option for providing Wi-Fi in several areas of the archive.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz); the product name states that it supports PoE and has two Ethernet ports.

Check the CE marking on the exact model before buying.

Joybuy
TP-Link Deco X50, 2-pack

TP-Link Deco X50, 2-pack

This mesh kit with two points is an option for extending Wi-Fi to several areas of the archive.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz and 5 GHz). TP-Link describes optional Ethernet backhaul for Deco X50.

In access point mode, the main router manages the clients and some advanced Deco app features aren’t available, according to TP-Link.

Joybuy

Frequently asked questions

Where should you place a wireless Wi-Fi extender?

Place it where it can still receive a good signal from the existing network, rather than in the archive area with the poorest reception. The Consumers’ Association advises placing Wi-Fi points with as few obstacles between them as possible. Then test the connection in the areas where the archive is used.

Can a Deco X50 kit work alongside an existing router?

TP-Link describes an access point mode and optional Ethernet backhaul for Deco X50. In access point mode, the main router manages the clients and some advanced Deco app features aren’t available. Check in advance which connections and router features the club needs.

What maintenance and security does the network need?

Keep the router and Wi-Fi points up to date. If the archive contains personal data, the organisation must tailor its security measures to the risks; the Dutch Data Protection Authority lists authorisation, network separation and patch management among the possible measures.

What compliance check should you make when buying in the Netherlands?

Check that the exact model carries a CE mark. According to the Dutch Authority for Digital Infrastructure, only radio equipment that meets the applicable requirements and carries a CE mark may be sold in Europe; a product title alone doesn’t prove that it has one.

Does a club in the Netherlands need a permit or registration for Wi-Fi?

Not for Wi-Fi use on the designated licence-exempt frequencies, provided the conditions of use are met. The Dutch Authority for Digital Infrastructure states that this also applies to business use; licence-exempt use doesn’t guarantee a connection free from interference.