Who is this advice for?

Watching at the far end of the hallway

Your film keeps buffering at one regular viewing spot, while the connection is better nearer the router. You want to know where a repeater can still receive a strong enough signal before you buy or install one.

A household with multiple screens

You want to stay connected elsewhere in the house while streaming. Coverage in different areas and a stable connection when several devices are in use matter more to you than just the headline speed on the box.

Watching near an Ethernet socket

You have a usable Ethernet cable by the television or near the hallway, and want to weigh up whether a wired access point would work with that connection.

What should you look for when choosing?

One wireless repeater

Choose this when: you mainly want to improve coverage in one viewing spot and can find a socket where the router signal is still usable.

Trade-off: the repeater still connects wirelessly to the router, and the quality of that connection affects what reaches your viewing spot.

Wired access point

Choose this when: there’s a working Ethernet cable running to, or near, the end of the hallway.

Trade-off: access point mode requires a cable and a device that supports it. TP-Link and devolo describe this feature for specific models.

Multiple Wi-Fi points that work together

Choose this when: coverage is poor not just where you watch films, but in other areas along the hallway too.

Trade-off: additional points need to be set up and are usually left switched on all the time. Also check that their mesh features work with your existing equipment.

The percentages give a general indication of which needs may be most important to consumers in this viewing situation.

Concern What to look for when buying Who is this more important to?
Signal where you watch Check potential socket locations and the area around the television. A signal indicator, such as the one on the TP-Link RE605X, can help you position the repeater; then test the connection where you watch. If I mainly watch at one regular spot at the far end of the hallway, I want to know whether the repeater can still connect reliably to the router there. Around 36% of consumers prioritise coverage in their viewing spot.
Coverage in multiple areas Work out which areas need coverage, how many points you’ll need and whether the mesh feature works with your existing equipment. If I want to stay connected in several areas of the house, I look beyond just the television at the far end of the hallway. Around 29% of consumers prioritise coverage in multiple areas.
Existing Ethernet cable Check where the cable runs and whether your chosen model has access point mode and the Ethernet port you need. If I already have a cable running to the hallway, I want to know whether I can use it for a Wi-Fi point. Around 21% of consumers prioritise making use of an existing cable.
Extra costs and power use First check whether moving the router would solve the problem. Then compare how many devices you’ll need and factor in their energy use. If I don’t want to buy equipment that won’t solve the problem, I start by checking my existing connection. Around 14% of consumers prioritise avoiding unnecessary purchase and running costs.

Common pitfalls

  • Assuming a high Mbps figure means fast streaming

    The advertised wireless speed isn’t the same as the speed of the entire connection from the router, through the hallway, to your viewing device.

    Once you’ve set it up, test the connection where you watch and compare the result with the requirements of your streaming service.

  • Putting the repeater where the signal already drops out

    A repeater depends on the connection it receives from the router. Placing it somewhere without a usable router signal won’t fix a weak incoming connection.

    Try different sockets along the hallway. On models with this feature, a signal indicator can help you choose a location.

  • Confusing an Ethernet port with a wired connection to the router

    You can connect a television to a wireless repeater using an Ethernet cable, while the repeater itself still connects to the router wirelessly.

    Check whether you have a cable running to your home network and whether the exact device supports access point mode.

Brands to consider

TP-Link

The RE605X and RE705X are examples of Wi-Fi 6 repeaters with different positioning and connection features.

  • According to TP-Link, the RE605X has a signal indicator and a gigabit port. The RE705X has a gigabit port and access point mode.
  • The OneMesh compatibility mentioned requires compatible OneMesh equipment. Product specifications can’t predict how a device will perform in your home.

devolo

The WiFi 6 Repeater 3000 is an example you can compare if you’re considering a plug-in repeater that can also be used as a wired access point.

  • devolo lists a gigabit LAN port, access point mode and mesh compatibility with other devolo Wi-Fi products.
  • Access point mode requires an Ethernet cable. These features don’t indicate the speed you’ll get at the end of a particular hallway.

NETGEAR

The EAX15 is an example of a plug-in Wi-Fi 6 extender with an Ethernet port.

  • NETGEAR lists a single gigabit port and an advertised wireless speed of up to 1,8 Gbit/s for the EAX15.
  • The advertised maximum speed isn’t a measurement of your internet speed by the television, and doesn’t guarantee coverage through your hallway.

Joybuy products for this situation

This selection includes mesh systems, repeaters and access points for anyone looking to extend coverage to one viewing spot or make use of a cable connection.

TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50, 3-pack

A good fit if you want to connect multiple areas using a mesh system rather than a single plug-in repeater.

Dual-band (2,4 GHz/5 GHz); Wi-Fi 6 (802.11ax); three units.

View at Joybuy
WiFi Repeater Pro in black

WiFi Repeater Pro, black

Worth considering if you want to extend an existing Wi-Fi connection to one regular viewing spot. Check that the repeater can still receive a usable signal where you plan to put it.

View at Joybuy
TP-Link Omada EAP673-Extender, network repeater, white

TP-Link Omada EAP673-Extender, white

Worth considering if you’re looking for a wireless extender or network repeater. Check first that its features are compatible with your existing network.

The product name lists 10, 100 and 1000 Mbit/s.

View at Joybuy
TP-Link EAP725-Wall with Power over Ethernet

TP-Link EAP725-Wall with PoE

A good fit for a wired access point setup if an Ethernet cable runs to the installation location.

The product name lists 5012 Mbit/s and Power over Ethernet (PoE).

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi network extender

TP-Link TL-WA801N

Worth considering if you’re looking for an access point or Wi-Fi network extender. A cable to your home network is needed for a wired access point setup.

N up to 300 Mbps; two antennas; WPS; passive PoE.

View at Joybuy

Frequently asked questions

How can you tell whether a Wi-Fi booster can stop your film from buffering?

First, check your internet speed using a computer connected to your home network with an Ethernet cable, then check it again where you watch. If the connection is already too slow by the router, a repeater won’t fix it. Netflix recommends a stable connection of at least 5 Mbps for Full HD and 15 Mbps for 4K for its service. Check the requirements of your streaming service too, and test on your viewing device if possible.

Where should you put a wireless repeater in a long hallway?

Choose a socket where the repeater can still receive a usable connection from the router, rather than automatically putting it next to the television. Compare a few possible locations, then test the connection where you watch.

What costs and practical points should you consider?

Before buying equipment, see whether moving the router or getting help from your internet provider could solve the problem. If you add Wi-Fi points, factor in their energy use too, and check the current warranty and support terms for the product you choose.

What requirements must a Wi-Fi booster meet when sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the applicable European requirements. Once the equipment meets these requirements, the manufacturer applies the mandatory CE marking. A product listing alone doesn’t confirm that an individual device meets those requirements.