Watching films in a room with weak Wi-Fi
Your film keeps buffering, mainly in your home office, and you want a stronger signal there. It’s important to place the extender somewhere it can still connect to the router.
First, check that your internet connection is good enough and whether the problem is mainly in your home office. If the Wi-Fi signal is weak there, a wireless extender may help, provided it still gets a good signal itself. If you have an Ethernet cable running to the room, an access point is another option. The advertised Wi-Fi speed doesn’t tell you the streaming speed where you watch, so check router compatibility and the exact model too.
Your film keeps buffering, mainly in your home office, and you want a stronger signal there. It’s important to place the extender somewhere it can still connect to the router.
You want to know whether the connection at your playback device can handle your chosen picture quality, rather than relying only on the maximum Wi-Fi speed shown on the box.
You can connect your home office by cable and want Wi-Fi there, or a connection for a playback device. Access point mode and the available Ethernet ports can help you decide which setup is right for you.
Choose this if: you can’t run a cable to your home office and can position the extender somewhere with a usable signal.
Bear in mind: distance and obstacles can affect the signal; the connection between the router and extender remains wireless.
Choose this if: there’s already a working Ethernet cable running to your home office and you want to provide Wi-Fi there.
Bear in mind: this setup requires a cable and a model with access point mode; check which port it uses too.
Take this step if: films also buffer close to the router, or a wired speed test there gives poor results.
Bear in mind: an extender won’t fix a problem with your internet connection itself. Check whether moving the router could already improve the signal too.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Range and placement | For a wireless extender, find a midway spot where it still gets a good signal from the router. Consumentenbond advises choosing a spot with as few obstacles as possible if the signal is weak at the back of your home. | If the signal is poor mainly in your home office, you’ll want to know where the extender can still connect. Around 36% of consumers put range and placement first. |
| Streaming at your chosen picture quality | Test the connection at your playback device. Netflix recommends 5 Mbps for Full HD and 15 Mbps for 4K UHD; these are recommendations for Netflix streams. | If you want to watch a film without buffering, focus on the connection where you watch rather than just the maximum Wi-Fi speed. Around 29% of consumers give stream stability top priority. |
| Cable and compatibility | Check that your router and extender support the mesh features you want, that the model has access point mode, and which Ethernet port your setup uses. | If there’s a cable running to your home office or your router needs to work with the extender, check in advance which features are actually compatible. Around 21% of consumers prioritise connections and compatibility. |
| Avoiding unnecessary purchases and power consumption | Check the connection at the router first, then compare the stated power consumption and the number of Wi-Fi points you need. | If you don’t want to buy a device that won’t solve your network problem, check the connection first, along with its power consumption over long periods of use. Around 14% of consumers make avoiding unnecessary purchases and power consumption their top priority. |
A wireless extender needs a usable connection to the router itself. If you place it somewhere the signal has almost disappeared, the problem may remain.
First, find a midway spot and check the signal there before placing the extender near your playback device.
The advertised Wi-Fi link speed doesn’t measure the speed from your router, through walls and over your internet connection, to your playback device.
Test the connection where you watch and compare it with the recommendation for your streaming service and chosen picture quality.
Mesh features may depend on having a compatible router. For example, TP-Link requires a compatible OneMesh router for OneMesh, while FRITZ! describes mesh connectivity with a FRITZ!Box.
Before buying, check your exact router model and which mesh features it supports.
You may also need a compatible router or an additional Wi-Fi point to use the mesh features you want.
The RE705X is worth considering if you’re choosing between wireless repeating and a wired access point.
The FRITZ!Repeater 1200 AX is worth comparing if you already use a FRITZ!Box and want to explore its mesh features.
The WiFi 6 Repeater 3000 is worth considering if you’re comparing repeaters for a single room and want the option of using access point mode.
Below are wireless Wi-Fi extenders and access points for a wired connection to your home office. Choose an access point only if an Ethernet cable is available there. For the specific model, also check the CE mark and product identity.
No image available
An option for extending your wireless network to your home office; the product description calls it a Wi-Fi 6 repeater.
Dual-band 2,4/5 GHz and one Ethernet port.
Check that the extender can still get a usable connection to the router where you plan to place it.
No image available
A repeater option for extending an existing wireless network to an area with weak coverage.
The product description states 2,4 GHz up to 300 Mbps.
Only 2,4 GHz is listed, so check that it’s suitable for your router and setup.
No image available
The product description lists both range extender mode and access point mode for extending your network.
2,4 GHz up to 300 Mbps, Ethernet ports up to 10/100 Mbit/s, two antennas, WPS and Passive PoE.
Only 2,4 GHz is listed, so check that it’s suitable for your router and how you plan to use it.
No image available
An access point for Wi-Fi in your home office if you can connect an Ethernet cable there.
Dual-band Wi-Fi, one gigabit Ethernet port and PoE.
This access point setup requires a wired connection to the room.
No image available
An access point option for a home office with an Ethernet cable available.
Wi-Fi 7, dual-band 2,4/5 GHz, three Ethernet ports including 2,5G support, and PoE.
This access point setup requires an Ethernet cable running to the room.
Not necessarily. A wireless repeater needs a usable connection to the router itself. Consumentenbond advises choosing a midway spot with as few obstacles as possible if the signal is weak at the back of your home.
No. A product specification doesn’t measure the internet speed at your playback device. Test the connection there; Netflix recommends 5 Mbps for Full HD and 15 Mbps for 4K UHD streams.
Check your internet connection itself first. Consumentenbond recommends a wired speed test; if the results are poor, an extender isn’t the first solution to try.
An access point is suitable for a home office where an Ethernet cable from the router is available and the model you choose supports access point mode. Without that cable, the connection between the router and extender remains wireless.
Radio equipment sold in the Netherlands must meet the applicable requirements and carry a CE mark, according to the Dutch Authority for Digital Infrastructure. Check that the product identity and marking match the specific model you buy.