Who is this choice for?

Downloading game updates in a distant study

You can get a wireless signal in your study, but want to download large updates there. Check the connection between the repeater and the router, and, if your PC or console has a network port, consider the wired options too.

Tackling a Wi-Fi dead zone

If the signal barely reaches your study, your choice depends on whether there’s a suitable place for a repeater or whether you can run a cable. TP-Link Netherlands recommends placing a repeater within range of the router.

Reaching other distant rooms too

If you want to provide Wi-Fi in other rooms as well as your study, check whether several well-positioned units will work with your router and network. The Consumers’ Association discusses Wi-Fi support and the impact of older Wi-Fi versions; also check that the combination you have in mind is mesh-compatible.

What should you look for when extending your Wi-Fi?

Standalone wireless repeater

Choose this if: you mainly want to reach one study and have a spot in between with a strong router signal.

Trade-off: the wireless connection back to the router remains crucial. Placing the repeater in a room with barely any coverage won’t solve the problem by itself.

Access point via Ethernet

Choose this if: you can run a network cable to your study or to an access point nearby.

Trade-off: the cable needs to connect the router to the access point, and the device must support access point mode. An Ethernet port on a wirelessly connected repeater doesn’t make its connection to the router wired.

Mesh with multiple Wi-Fi points

Choose this if: you want to reach other distant rooms as well as your study.

Trade-off: check that your router and the extra points support the mesh features you want to use together. Mesh or a newer Wi-Fi version won’t, on its own, guarantee fast downloads.

What to consider What should you check? Who is this important for?
Range and placement Check the signal at a socket between the router and your study. If the connection isn’t stable there, look into a wired access point. If I mainly need a practical spot between the router and my study, I want to receive a stable router signal there; around 36% of consumers put range and placement first.
Download speed Compare the download speed in your study with the speed near the router. Also take your internet connection and receiving device into account. For large game updates, I want to know what speed I’ll get in my study, not just the advertised peak Wi-Fi speed; around 29% of consumers prioritise download throughput.
Wired connection Check whether you can run a cable from the router to the access point and whether the device you choose has access point mode. Separately, check whether your PC or console supports Ethernet. If I can run a cable, I want it to reach the access point rather than simply connecting my end device to a wirelessly connected repeater; around 21% of consumers prioritise a wired connection.
Router compatibility Make a note of your router model and check exactly which mesh features work with the extender you have in mind. If I want to extend Wi-Fi to several rooms, I want to know whether my router works with the mesh system I’ve chosen; around 14% of consumers make compatibility their top priority.

Common buying mistakes

  • Putting the repeater where the signal already drops out

    A repeater needs a usable connection to the router itself; in an existing dead zone, that connection may be too weak.

    First, check whether there’s a spot in between with a strong enough router signal. If not, see whether an access point via Ethernet is an option.

  • Assuming the advertised Mbps figure is your download speed

    A Wi-Fi specification doesn’t measure the entire connection to the download server. The connection between the repeater and router matters too.

    Check the speed where you’ll be downloading, and treat advertised Wi-Fi speeds as product specifications, not guaranteed download speeds. The Consumers’ Association describes speed tests at different locations and distances.

  • Mistaking an Ethernet port for a wired connection to the router

    Your PC or console can be connected to a repeater through its port even while the repeater itself communicates wirelessly with the router.

    Check that the cable really does run from the router to the access point and that the device supports access point mode.

Brands to consider for this setup

TP-Link

The RE705X is a dual-band Wi-Fi 6 repeater with a gigabit Ethernet port and access point mode, offering the option of wireless placement or a wired connection.

  • TP-Link lists Wi-Fi speeds of 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz for the RE705X.
  • These are advertised Wi-Fi speeds, not measurements taken in your study. TP-Link notes that OneMesh requires a OneMesh router.

devolo

The WiFi 6 Repeater 5400 is designed for those who want flexibility when choosing where to place a standalone repeater.

  • devolo lists control via an app or web interface, and mesh support with other devolo Wi-Fi products.
  • The manufacturer quotes a maximum of 5400 Mbit/s; this isn’t an independent measurement of download speed where you’ll use the device.

Xiaomi

The Mi Wi-Fi Range Extender Pro is a wireless extender for those mainly looking to improve coverage.

  • Xiaomi lists 2.4 GHz band support for model R03.
  • Xiaomi quotes a maximum Wi-Fi signal speed of 300 Mbps. This specification isn’t a measured download speed in your study.

FRITZ!

The FRITZ!Repeater 1200 AX is worth considering if you want to extend an existing FRITZ! network.

  • FRITZ! describes a setup in which this model connects via Wi-Fi behind an existing Mesh Repeater.
  • Check whether this specific mesh setup is compatible with your router and network; the described combination won’t automatically work with other routers.

Joybuy products for extending your Wi-Fi

This Joybuy selection focuses on mesh kits for multiple rooms and access points for a wired connection to your study.

TP-Link Deco E4 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (802.11ac)

This mesh kit, with three units, is designed to extend Wi-Fi across multiple rooms.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz). The product description lists Ethernet ports of up to 100 Mbps.

View at Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point

TP-Link Omada EAP653

A Wi-Fi 6 access point for a wired extension. For this setup, Ethernet must connect the router to the access point.

Dual-band Wi-Fi 6, gigabit Ethernet port and PoE support, according to the product description.

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh kit

TP-Link Deco XE75, tri-band Wi-Fi 6E

The Deco XE75 is a mesh option for those who want to reach other distant rooms too.

Tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands. The product description lists three units and Ethernet ports on each unit.

View at Joybuy
TP-Link Omada EAP613 Wi-Fi 6 access point

TP-Link Omada EAP613

This access point is suited to a wired extension. Check whether you can run an Ethernet connection to the router.

The product description lists Wi-Fi 6, mesh, seamless roaming and PoE support.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

This model offers access point and range extender modes. Check which mode and connection type are right for your network.

2.4 GHz only, with an advertised Wi-Fi signal speed of up to 300 Mbit/s. The product description lists Ethernet ports up to 10/100 Mbit/s and passive PoE.

View at Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Place a repeater roughly halfway between the router and the room with poor coverage, somewhere it can still receive a good signal from the router. TP-Link Netherlands recommends keeping the repeater within range of the router; if there are obstacles, you may need to place it closer to the router.

Will a repeater always improve download speeds for a game update?

No, a repeater doesn’t guarantee faster downloads. The connection back to the router, your internet connection and the receiving device all play a part. Compare the speed where you’ll be downloading with the speed near the router before treating an advertised Mbps figure as an expectation.

What should you do if the repeater doesn’t receive a stable signal?

Move it closer to the router. If there’s no suitable spot in between, TP-Link Netherlands describes an access point connected via Ethernet as an alternative, provided the device you choose supports access point mode.

What should you look for in the CE marking on a Wi-Fi repeater?

Check the specific version being offered. According to the Dutch Authority for Digital Infrastructure, radio equipment should display the CE marking visibly, and the corresponding declaration of conformity is important; a product listing alone doesn’t prove this.

Can you return a repeater bought online if it isn’t suitable for your home?

For online consumer purchases, you generally have a statutory 14-day cooling-off period after delivery, with some exceptions, according to ACM ConsuWijzer. This is a cooling-off period and is separate from your rights if a product is faulty or doesn’t meet the terms of the contract. Any additional Joybuy returns policy is a separate seller policy; check the terms for the specific offer.