Home worker with weak Wi-Fi downstairs
Your workspace is outside the strong coverage area of your current Wi-Fi access point. Obstacles such as walls and ceilings can affect the signal, as explained by the Consumers’ Association (Consumentenbond).
First, check whether the dropouts are caused by the Wi-Fi signal between floors or by the upload speed available from your internet connection. A different router won’t solve a lack of upload bandwidth. If you can run an Ethernet cable downstairs, a wired access point or mesh node with wired backhaul could be a good fit. Without a cable, mesh can work if the extra node still receives a strong connection. Then consider how many nodes you need and how the solution will work with your existing modem.
Your workspace is outside the strong coverage area of your current Wi-Fi access point. Obstacles such as walls and ceilings can affect the signal, as explained by the Consumers’ Association (Consumentenbond).
Calls are taking place on several devices. Zoom links the bandwidth required to factors including video quality and the number of participants. ACM ConsuWijzer also points out that the upload speed of your fixed broadband connection matters.
You’re looking for extra Wi-Fi downstairs without unnecessarily replacing your existing router. Check how the additional system works with your modem and which features remain available in the mode you choose.
Choose this when: you can run an Ethernet cable downstairs and want to keep your current modem or router.
Trade-off: you’ll need a cable and a suitable power supply. An access point such as the Ubiquiti U7 Pro is not a standalone internet router.
Choose this when: you need Wi-Fi in several places and can run cables between the mesh nodes.
Trade-off: you’ll need multiple nodes and suitable cabling. Tweakers describes wired backhaul as a stable way to connect mesh nodes to one another.
Choose this when: running cables isn’t practical and you can place an extra node where it still receives a strong signal from the main network.
Trade-off: distance and obstacles affect the wireless connection between the nodes. A higher claimed Wi-Fi speed doesn’t guarantee better coverage downstairs.
Choose this when: your measurements show that a single, well-positioned Wi-Fi access point can reach both your workspace and the other rooms you use.
Trade-off: a new router in the same unsuitable position may not improve coverage on a floor with obstacles. Make sure any replacement is compatible with your provider’s connection and settings.
| What to consider | What to look for | Who is it for? |
|---|---|---|
| Coverage downstairs | Take measurements at your workspace. Check how many nodes the system includes and whether you can run an Ethernet cable downstairs. | I want a usable connection at my downstairs workspace, even if floors and walls weaken the signal. Around 36% of consumers say coverage in their workspace is their top concern when buying. |
| Simultaneous calls | Compare wired and Wi-Fi measurements during typical simultaneous use. Also check your broadband package’s upload speed. | If video calls are taking place at the same time, I want to know whether both my home network and internet connection can handle them. Simultaneous calls are the top priority for around 29% of consumers. |
| Connection to the modem | Check that the system supports access point mode and the wired backhaul you want, and find out which features are disabled in that mode. | I want to keep my existing modem or router and know in advance how the additional Wi-Fi will connect to it. Around 21% of consumers give keeping their existing network top priority. |
| Complete setup | Check how many nodes, cables and power supplies you’ll need. For a PoE access point, make sure you have a suitable power supply or switch. | I want to be able to use the complete installation without having to work out which extra parts I need later. For around 14% of consumers, the complete setup is their main buying concern. |
Obstacles can affect Wi-Fi coverage, and video calls also use capacity from your internet connection. A router with a higher stated Wi-Fi speed won’t automatically solve a limited upload speed.
Compare wired and wireless measurements on the same connection, and check the available upload speed during simultaneous use.
The extra node also needs a connection to the main network. If the signal is weak where you place it, that will limit what it can relay downstairs.
Test the proposed location before installing the node permanently. If you can run a cable, check whether the system supports wired backhaul.
A mesh system with several nodes isn’t the same as a single access point, and a PoE access point needs a suitable power supply. The number of devices alone won’t tell you which setup you need.
Make a list in advance of the Wi-Fi nodes, network ports, cables and power supplies you’ll need, and check how they connect to one another.
The ZenWiFi BD4 is a dual-band mesh option; the separate BT8 range is tri-band and includes 6 GHz. According to ASUS specifications, each BD4 unit has two 2.5-gigabit ports.
The Deco X50 is a Wi-Fi 6 mesh model with three gigabit ports on the model described, according to TP-Link.
The FRITZ!Repeater 3000 AX is designed to extend a compatible FRITZ! mesh network. FRITZ! also describes connecting compatible FRITZ! devices via LAN.
The Ubiquiti U7 Pro is a wired access point for an installation with a fixed network connection downstairs.
Orbi is a mesh option to compare if you need several nodes. NETGEAR documents wired backhaul for Orbi systems.
This selection includes mesh systems with several Wi-Fi nodes and a wired access point for a downstairs workspace.
No image available
A good fit for a mesh setup with several nodes if you also want to consider wired connections between them.
Tri-band Wi-Fi 7; 2-pack. The product description lists three WAN/LAN ports per unit, with both wired and wireless backhaul.
No image available
A good fit for a mesh setup if you want to factor wired connections between nodes into your decision.
The product name specifies dual-band 2.4 GHz and 5 GHz, Wi-Fi 7 and an indoor model. The product specifications list two 2.5 Gb ports per unit.
No image available
A good fit for a wireless mesh setup with several nodes. Test whether the extra node’s location receives a strong enough signal.
The product name specifies dual-band 2.4 GHz and 5 GHz, and Wi-Fi 5. The product description lists a maximum Wi-Fi speed of 1200 Mbps and three units.
No image available
A good fit for a mesh setup with several nodes if you also want to connect wired devices.
The product name specifies dual-band 2.4 GHz and 5 GHz, and Wi-Fi 6. The product description lists three gigabit ports per unit.
No image available
A good fit if you can run an Ethernet cable to your workspace and want to keep your existing router.
The product description lists Wi-Fi 6, one gigabit Ethernet port and power via PoE+, passive PoE or DC. This access point isn’t a standalone internet router and needs a wired network connection and a suitable power supply.
No. First, compare the connection by the modem with the one at your workspace, and try moving the access point to a better position. Obstacles and the location of the Wi-Fi access point can affect coverage. If the internet upload speed is the problem, a different Wi-Fi router won’t fix it.
That depends on the system you choose and its settings. TP-Link describes an access point mode for Deco in which the existing router continues to assign IP addresses and wired backhaul is possible, but some Deco router features are disabled.
Place a wireless mesh node somewhere it still receives a strong enough signal from the main node. Test the position, and follow the chosen system’s wiring diagram and instructions when installing it.
No. According to the Dutch government, there is no fixed legal guarantee period in the Netherlands. If a product is faulty, consumers may be entitled to a free repair, replacement or refund, depending on the circumstances. Damage caused by the owner and normal wear and tear aren’t automatically covered.
According to the Dutch Authority for Digital Infrastructure, radio equipment covered by the rules must meet European product requirements and carry the required CE marking. Check the device you actually receive. A statement in a product description alone doesn’t confirm that an individual item has been checked.