Who is this relevant to?

Remote worker with a weak signal downstairs

You want a stable connection where you work and can check whether repositioning the router or adding a Wi-Fi access point improves coverage. The Consumers' Association (Consumentenbond) offers tips on improving Wi-Fi reception at home.

Remote worker who can run a cable

You want to work out whether an access point or a wired mesh node will suit the available cable route. TP-Link and ASUS describe Ethernet backhaul as a way to connect mesh points by cable.

Resident with an existing FRITZ!Box

You want to extend coverage without replacing your whole network and can check whether FRITZ! mesh features are compatible with your existing router. FRITZ! describes centralised settings for a compatible FRITZ! mesh network.

What should you look for when choosing?

First, check the signal where you work and by the router. Then choose between repositioning the router, adding a wireless access point or using a wired connection, depending on what’s missing.

What to consider What should you check? Who is this important for?
Coverage where you work Check the signal by the router and where you work; find out where an extra access point can still receive a good signal. If I work downstairs, I want to know whether the signal reaches my workspace before buying an extra device. Around 36% of consumers prioritise reliable coverage there.
Connection between access points Check whether you can run a cable and whether the system supports Ethernet backhaul or access point mode. If I can run a cable, I want to avoid the connection between rooms becoming the weak link. Around 29% of consumers give wired stability top priority.
Connecting to existing equipment Make a note of your router model and check mesh compatibility, connection mode and available ports. If I want to keep my existing router, I want to know in advance how an extra access point will work with it. Around 21% of consumers focus mainly on compatibility with their current router and internet connection.
Avoiding unnecessary replacement First, test the router’s position and Wi-Fi settings; then compare adding an access point with buying a complete set. If my current equipment may still be suitable, I don’t want to replace more than necessary. Around 14% of consumers want to make use of their existing equipment first and only buy something extra if needed.

Common pitfalls

  • Assuming a higher Wi-Fi speed guarantees better coverage

    The advertised speed doesn’t tell you whether the signal will reach your workspace through the kitchen and other obstacles. The Dutch Authority for Digital Infrastructure (RDI) notes that 5 GHz has a shorter range than 2.4 GHz.

    Check the connection where you work and consider where the router is positioned before choosing based on speed specifications.

  • Putting a wireless access point somewhere the signal is already weak

    A repeater or mesh point also needs a usable connection to the existing network.

    Find a midway spot with good reception; consider using a cable if that isn’t possible.

  • Assuming every device offers the same mesh features

    The shared mesh settings described by FRITZ! are designed for a compatible FRITZ! network and aren’t automatically available with every router.

    Make a note of your current router model and check compatibility or access point mode before choosing an extra access point.

Relevant brands for this choice

TP-Link

The Deco X50 is a mesh range available in one-, two- and three-unit versions.

  • According to TP-Link, each Deco X50 unit has three gigabit ports, and Ethernet backhaul is optional.
  • The stated coverage and speed aren’t measurements taken in your home. Check the number of units and the connection mode.

ASUS

The ZenWiFi XD5 is a mesh range that can make use of existing Ethernet cabling.

  • ASUS describes Ethernet backhaul and the option to use one or separate network names.
  • Some Wi-Fi 6 features require compatible devices. ASUS also notes that 160 MHz may be restricted in some regions; stated coverage doesn’t guarantee reception beyond the kitchen.

FRITZ!

The FRITZ!Repeater 1200 AX is particularly relevant for extending a compatible existing FRITZ! network; the FRITZ!Box 4060 is a standalone router.

  • According to FRITZ!, the repeater has one gigabit LAN port and can adopt the settings of a compatible FRITZ! mesh network.
  • Check your main router model: the shared mesh features described aren’t automatically available with a router from another brand.

Joybuy products for extending Wi-Fi

These Joybuy products are mesh systems for extending Wi-Fi across several rooms. Also check that the specific product has the required CE marking: according to the RDI, only products with CE marking may be sold in Europe.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A mesh system with two units to extend Wi-Fi between rooms. Check whether the connection you want between the units can be wired or needs to be wireless.

View at Joybuy
ASUS ZenWiFi BT8 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

A set of two mesh units for extending Wi-Fi across several rooms.

The product name specifies tri-band at 2.4, 5 and 6 GHz, and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A mesh system with two units for extending Wi-Fi across several rooms.

The product name specifies Wi-Fi 6.

View at Joybuy
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

A set of three mesh units for placing several access points around your home.

The product name specifies dual-band at 2.4 and 5 GHz, and Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

A mesh system with three units for extending Wi-Fi to several areas of your home.

The product name specifies dual-band at 2.4 and 5 GHz, and Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Should you buy a new router straight away if the signal is weak where you work?

No. Start by checking the signal and trying a better position for your existing router. Check the Wi-Fi settings too; then you can decide whether you need an extra access point. The Consumers' Association advises checking first whether you can improve reception without buying new equipment.

Where should you put a wireless Wi-Fi access point?

Place it somewhere it can still receive a good signal from the router or another access point, rather than where the signal has already dropped out. For weak coverage at the back of the house, the Consumers' Association suggests that a central spot in the home may help.

How do you connect two Deco points with a cable?

The connection method depends on the mode. TP-Link describes connecting the satellite to the LAN side of the main Deco, or to a switch connected to it, in router mode. In access point mode, TP-Link says the satellite can also be connected to the main modem or router.

Can you use your own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the right to use your own router. If you connect your own device directly to your provider’s network, security requirements and specific connection settings may apply. Ask your provider for these settings if necessary.

Do you need a licence or registration for ordinary home Wi-Fi?

According to the RDI, you can use the designated licence-exempt frequencies without notification or registration, as long as you comply with the conditions of use. Check your router’s country settings.