Who is this guide for?

Student with a distant study

Needs a usable connection for presentations in a room behind walls or on another floor. The Consumers’ Association points out that walls and ceilings can disrupt the Wi-Fi signal, so the position of your router and any additional access points matters.

Presenter using a wireless screen

Already has Wi-Fi, but wants to check that their laptop, screen and chosen sharing method are compatible. Google Help explains that network configuration can prevent communication with a Cast device; Microsoft Support lists Miracast support as a requirement for the Windows wireless projection method it describes.

User who can run a cable

Can run Ethernet to the study and is comparing a wired access point with wireless extension. Manufacturers such as FRITZ! and ASUS describe wired connection options for specific products and versions.

What should you look for?

Move your existing router

Choose this if: the signal is poor mainly in one room and you can first try moving the router to a more central or higher position.

Bear in mind: moving it may require a longer cable or coordination with your provider; walls and ceilings will still affect the signal.

Wired access point or mesh point

Choose this if: you can run Ethernet to the study and want to connect a Wi-Fi access point there.

Bear in mind: you’ll need a suitable cable route and compatible connections; also check how the device you choose is powered.

Wireless mesh point

Choose this if: you can’t run a cable, but there’s a spot between the router and the study where the extra point can still get a connection.

Bear in mind: coverage depends on placement and obstacles; the advertised Wi-Fi speed won’t predict performance in your room.

A new router only

Choose this if: you’ve established that the router itself is the limitation and moving it or adding an access point isn’t suitable.

Bear in mind: a new router in the same unsuitable position may still not reach the distant room properly, and won’t automatically make a screen compatible with Cast or Miracast.

Walls and ceilings can weaken Wi-Fi, according to the Consumers’ Association. So first test the connection where you’ll be presenting, then check that your sharing method works with your laptop and screen.

What to consider What should you check? Who is this important for?
Coverage in the room Test the connection where you’ll be presenting and see where a router or extra access point could go. If I need a usable connection in the study, I want to know whether the room and the areas in between will get coverage. Around 36% of consumers put coverage at the top of their list.
Screen sharing Check your chosen sharing method and whether the receiving screen supports it. If I want to show my slides wirelessly, my laptop and screen need to find each other using the chosen method. Around 29% of consumers prioritise working screen sharing.
Wired connection Check whether you can run Ethernet to the room and whether the connections and power supply are suitable for the access point. If I can run a cable to the study, I want to connect an extra access point directly. Around 21% of consumers prioritise a wired setup.
Don’t buy more than you need Test your existing router first, then compare how many access points you need and how much power they use. If I want to avoid unnecessary purchases and extra energy use, I’ll start by testing the connection and finding a better position for the router. Around 14% of consumers consider cost and energy use their main concern.

Common mistakes

  • Assuming a high speed rating means good coverage in the study

    An advertised Wi-Fi speed won’t automatically overcome poor router placement or obstacles between rooms.

    First, test the connection where you’ll be presenting and, if possible, try moving your existing router to a better position.

  • Assuming better Wi-Fi will make screen sharing work too

    With Google Cast, network isolation can prevent communication with the streaming receiver. For the Windows projection method via Miracast described here, the screen must support the technology or you’ll need a suitable adapter.

    Test the actual connection between your laptop and screen before choosing a router or extra access point.

  • Placing a wireless mesh point somewhere with no usable connection

    The extra point needs to maintain a connection to the rest of the network; placing it halfway across the room where coverage is poor won’t solve the problem by itself.

    Find a spot where the point can still receive a connection, or consider a wired connection if you can run Ethernet to the room.

Brands to consider

TP-Link

The Deco range includes mesh products for wireless extension, as well as versions designed for wired setups.

  • TP-Link says the Deco X50 points have three Gigabit ports; the Deco X50-PoE supports PoE.
  • These features apply to the models named. Check the exact version, pack size and power requirements.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range to consider when comparing wireless extension and Ethernet backhaul.

  • ASUS describes Ethernet backhaul for setups with Ethernet ports in the walls.
  • ASUS notes that 160 MHz on 5 GHz may not be available in some countries. Advertised bandwidth doesn’t guarantee a particular speed in a specific room.

FRITZ!

The FRITZ!Repeater 1200 AX is an extension option for anyone who wants to keep their existing router; it isn’t a replacement for a complete router.

  • FRITZ! describes connection via LAN for use as an additional access point.
  • Adding it to FRITZ! Mesh when used with a FRITZ!Box depends on the stated FRITZ!OS requirement. Check individual features when using a router from another brand.

NETGEAR

Orbi is an option to consider when comparing systems with a router and satellite units.

  • NETGEAR describes both wireless and wired backhaul for compatible Orbi systems.
  • The features described don’t automatically apply to every version. For the Ethernet setup mentioned, NETGEAR recommends updating the firmware first.

Joybuy products

This selection includes mesh extensions, a Wi-Fi 6 router and a repeater for existing Wi-Fi. For the exact version, also check the applicable requirements and CE marking: according to the Dutch Authority for Digital Infrastructure, a product listing alone doesn’t prove that a specific item meets them.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

An option to compare if you’re considering a mesh setup with two points; check that the positions you choose in your home provide a usable connection.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

An option to compare if you’re looking for a mesh setup with two points; first check where the units can go and whether the connection works in those locations.

The product name specifies Wi-Fi 6 and a pack of two.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh dual-band router

ASUS RT-AX52 AX1800 AiMesh router

A router to compare if you’ve established that your current router is the limitation; check that it’s compatible with your existing network and intended position.

The product name specifies Wi-Fi 6, dual-band (2,4 GHz / 5 GHz), AiMesh and Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

An option to compare if you want to set up several mesh points; first work out how many you need and where they can get a usable connection.

The product name specifies dual-band (2,4 GHz / 5 GHz), Wi-Fi 6 (802.11ax) and a pack of three.

View at Joybuy
Wi-Fi Repeater Pro, black

Wi-Fi Repeater Pro (black)

An option to compare if you want to extend an existing wireless network; check that the repeater can maintain a connection to the network where you plan to use it.

View at Joybuy

Frequently asked questions

Why doesn’t the presentation screen appear when both devices are connected to Wi-Fi?

First, check your sharing method and network configuration. Google Help warns that network isolation can prevent communication with a Cast device. For the Windows projection method described by Microsoft, the screen must support Miracast or you’ll need a suitable adapter; these requirements don’t automatically apply to every presentation method.

Does an extra Wi-Fi point need to go directly in the distant study?

No, not necessarily: a wireless point also needs to maintain a connection to the existing network. Try a spot where that connection is still usable; if you can run Ethernet to the room, compare a point that can be connected via LAN.

Do you need Wi-Fi 7 to present slides?

Not for this use alone. The Consumers’ Association considers Wi-Fi 6 a suitable choice for most people and points out that the Wi-Fi version alone doesn’t determine performance. Focus on coverage where you’ll be presenting and screen compatibility.

What should you consider when it comes to the power use of extra Wi-Fi points?

Bear in mind that extra Wi-Fi points may stay on for long periods. The Consumers’ Association therefore includes energy use in its testing method; compare the power use of the exact models you’re considering.

What requirements must a Wi-Fi router sold in the Netherlands meet?

The relevant European requirements apply to the radio equipment in question, along with the requirement for the correct CE marking. The Dutch Authority for Digital Infrastructure states that stricter digital security requirements have applied to the wireless equipment concerned since 1 August 2025. Check the exact version: a product listing alone doesn’t show that a specific item meets those requirements.